Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
2 Insert two AAA, LR03 or equivalent batteries, taking care to respect the polarities: + on the battery against + on the remote control – on the battery against – on the remote control 3 Replace the cover by sliding it back until it clicks into position. The main lead must be plugged into an appropriate socket. Before plugging your system into a main socket, you must check the voltage. Plug the main lead (marked AC CORD on the rear of the system) into an appropriate socket. Press the On/Standby button to switch your Micro component system on. Inserting Remote Control Batteries Connecting Y our System to the Power Supply 4 Connecting the AM(MW)/LW Aerial Connecting the FM Aerial GB The AM(MW)/LW aerial (for long and medium waves) can be: There are two types of aerials, follow the instructions below (depending on option chosen). Placed on a stable surface Fixed to the wall (you must first remove the base) The AM aerial connector terminals are located on the rear of the system and are marked AM. To avoid noise interference, check that the loudspeaker wires do not run close to the aerial wires. Always keep them at least 2 inches (5 cm) away. AM FM (75.) ANTENNA 1 1 How to connect a COAXIAL TYPE areial. Connect a 75. antenna to the FM aerial terminal. Plug the connector on the FM aerial supplied into the coaxial socket (75.) marked FM on the rear of the system. Follow the instructions given on Page 8 to tune into a radio station, and determine the best position for the aerial. If reception is poor, you may need to install an outdoor aerial. To do so, connect an outdoor FM aerial to the FM socket on the rear of the system, using a 75. coaxial cable (not supplied). FM FM FM AERIAL 75. COAXIAL CABLE (supplied) (not supplied) 2 2 How to connect a SCREW TYPE wire aerial. The FM aerial connector terminals are located on the rear of the system and marked FM(75.). Spread the T.form FM aerial out and attach the ends to a wall, in the position providing the best reception. 5 Setting the Clock Listening to a Compact Disc Listening to a Compact Disc GB Your system is equipped with a clock which allows you to turn You can play 12 cm or 8 cm compact discs without an adapter. your system on and aff automatically. You should set the clock: When you purchase the Micro component system 1 Select the CD function by pressing CD on the front panel. After a power failure 2 Open the compact disc compartment by pressing down and After unplugging the unit releasing the cover. CD VOL. VOL Tuning ModeCD CD Band TUNER On/Standby Volume EQPresetS.BASS Down Up REC/Pause TAPE AUX Tuning Mode CD 1 2 3 4 5 6 7 function, by pressing Clock once. 3 Place your disc in the compartment, with the label on the disc Close the compartment by pushing down on the cover until it The display indicates the number of tracks on the ) ) again to continue playing Press... SKIP/SEARCH once SKIP/SEARCH once SKIP/SEARCH twice SKIP/SEARCH or the appropriate number of times Press and hold down... SKIP/SEARCH until you reach the required point Backwards until you reach the required point ou are advised to turn the volume down before using 9 Press the ST ( ) button when you have finished. VOL. VOL. Tuning Mode On/Standby Timer On/Off EQ Preset Power Sound Sleep CD Repeat Mono/ST. TUNER Program /Set AUX Timer/ Clocky CD CD 21 7 44 66 35 24 1 9 77 88 9 56 6 Precautions When Using Compact Discs Programming the Order of Playback Programming the Order of Playback GB To guarantee hours of enjoyable listening with your compact discs: Always hold them by the edges to avoid leaving fingerprints on the shiny surface Always replace them in their cases after listening to them Do not fix paper or adhesive tape to the discs and do not write on the label Clean the player with a special cleaning disc CD Repeat Function You can repeat: Aspecific track on a compact disc All tracks on the compact disc This function is not available when playing a disc in a random sequence. Press the CD Repeat button. To repeat the... Press CD Repeat... You can decide for yourself: The order in which you listen to the tracks The tracks to which you do notwish to listen 1 ). 2 Press Program/Set. Result: PROGRAM and P-01--are displayed. 3 Select the required track by pressing the SKIP buttons: This feature can be combined with the Repeat function. If necessary, stop the player by pressing STOP ( to move backwards through the tracks 4 5 6 7 Press Program/Set. Result - T When you have finished selecting the tracks, press CD ( ) to start listening to the selection, in the order in which the tracks were programmed. Press STOP ( ) twice to cancel the selection when the disc is playing. TAPE EQ Preset Power Sound Sleep CD Repeat Mono/ST. TUNER Band Program /Set AUX CD VOL. VOL. Tuning ModeCD CD 2 1 4 7 3 6 3 Current track indefinitely Once (REPEAT 1 is displayed) Disc Twice (REPEAT ALL is displayed) When you wish to stop the Repeat function, press CD Repeat a third time. Result: REPEAT is no longer displayed and th...