Log:
Évaluations - 0, GPA: 4 ( )

Instructions Kenwood, Modèle M-25

Fabricant : Kenwood
Taille : 935.82 kb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Therefore, it could happen that the optimum level cannot be adjusted, though it is a very rare case. 5. The recording level set by the CCRS is canceled when the [±] key of the CD player is pressed or the power is turned off. 6. When a CD containing continuous recording of several tracks, such as a live recording, is recorded on tape, unexpected spaces may sometimes be left automatically between tunes. 7. When the ONE WAY MODE key of the cassette deck is ON. the tape end processing occurs only on the A side of tape. MIDI M-25/M-252 (En) 37 Recording of CD playback (CCRS) Edited recording of CD Place a disc in the CD player. 2 Set the input selector to CD. 3 Set up the cassette deck ready for recording. 0 Insert a tape in Deck B. 0 Set the tape transport direction. 0 Select two-side recording. 0 Select the DOLBY NR mode. (Refer to page 33.) ^Activate CD editing. 0 Press the EDIT key on the CD player. EDIT I PGM | and EDIT indicator lights up. 1 tt>7 1 ( 1 1 s r4f~] —as « 7 » » 10 n I U • ~ " • 0 Input the recording time of the tape. While the EDIT indicator is lighted, input the two-way recording time of the tape. .........A I ■ I ■ I ■ Example: For a C-60 tape, press I + 101 6 times and [o] once. For a C-46 tape, press I + 101 4 times and [6] once. During editing Remaining time in file B Completion of editing Stops blinking __B ,»!««» i ^ -w „— Blinks--.1trQ ¡ Total time of selected tracks Track Nos. selected from disc jj) Start recording. • The maximum number of tracks that can be edited is 20 tracks. • The CCRS is activated so the recording will start in about 70 seconds. • When the recording is completed, both the cassette deck and CD player enter the Stop mode. To stop recording 1 ~ 4 ► 38 MIDI M-25/M-252 (En) Notes: 1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it. or the last track on side A or side B may be cut short. 2. Up to a maximum of 20 tracks can be edited using this function. MIDI M-25/M-252 (En) 39 Tape dubbing The dubbing refers to the copy of the recorded contents of a tape to another tape (tape in Deck A tape in Deck B). Normal-speed dubbing: Copy at normal tape speed. High-speed dubbing: Copy at double the normal speed. ONE WAY MODE key (Í— _—__])■ ♦rf* A 1 J -I- - "\ - 1 Ш rm Ж.--- —s- — ^ □ L T—> \ * 1 1 \ r NORM, key HIGH key 'j Insert tapes in the cassette decks. Tape to be played in Deck A Тара to be recorded onto in Deck В * Intial tape transport directions Set the same tape transport direction for both decks. Refer to page 30. ^ О M ° 1 Г «4 I IU 4« 1 13 ► to- 1-Г 3 Select one-way or two-way dubbing mode. ONE W For one-way ODE dubbing AY IODE For two-way dubbing rONE Lway MOOE 4 Start dubbing. For normal-speed dubbing For high-speed dubbing NQBM. HIGH /DUBBING О NORM. Hti O DUBBING, To stop dubbing Deck B Stop key • Both decks A and B enter the Stop mode. To pause dubbing Normal-speed dubbing: Press the NORM. key. High-speed dubbing: Press the HIGH key. • Deck B enters the Record-pause mode after leaving a non-recorded space of about 4 seconds in case of normal-speed dubbing, or about 6 seconds in case of high-speed, dubbing. '' ' ' • To resuma dubbing, press the same key as above again. , • When any of Deck B operation keys is pressed during dubbing, it is canceled. Deck B starts the operation as indicated by the key pressed, and Deck A enters the Stop mode. Notes: 1. The recording level cannot be adjusted during dubbing. The system is deactivated during dubbing operation with the result that the dubbed version features the same noise reduction as the original. Noise from TV may interfere with dubbed sound if high-speed dubbing is executed near a TV set. To prevent this, install the system further from the TV set. If the original tape was recorded at a high level, the sound quality may be degraded if high speed dubbing is used. In such a case, use normal speed dubbing. 2. 3. 40 MIDI M-25/M-252 (En) Operation of timer Be sure the correct date and time are set before setting the timer. ■ Preparations The preparations consist of the setting of the timer ON and OFF times (and the preset station No. when receiving radio broadcast is required). Example: Setting timer radio reception from 7:30 AM to 8:00 AM of preset station No. 3 in timer program 1. EXE. 1 Z 2 key rrr^*T>r^ f — £78 8 B8r ii .1 —J) «CEWOOn Press the POWER key ENTER keV at first. 1 *®v 1 *”v _ Example: Setting timer CD playback from 11:00 PM to 11:30 PM in timer program 2. Timer reception/recording of radio broadcast Timer playback of CD or tape 1 Enter the program setting mode. Press the PROG. 1 key. Press the ENTER key. Enter the program setting mode. Press the PROG. 2 key. Press the ENTER key. n n n uuu —v '■i ■*. ”■ ~to“° . n- n'n uuu N . OH orr ^ n n n * i ' u u u...

Ce manuel est également adapté pour les modèles :
Stéréo - M-252 (935.82 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories