Évaluations - 4, GPA: 3.8
(
)
)
|
Facilité d'utilisation
Keep this manual handy for future reference. Connection of the system accessories The supplied antenna is for indoor use. Place it as far as possible from the main system, TV set, speaker cords and power cord, and set it to a direction which provides the best reception. The accessory antenna is for temporary indoor use only. For stable signal reception we recommend us- ing an outdoor antenna. Remove the indoor antenna if you connect one outdoors. 1Connect to the antenna terminal. 2Locate the position providing good recep- tion condition. 3Fix the antenna. FM indoor antenna AM loop antenna CAUTION Note on Connection Connect the components as shown in the diagram. Only plug the power cord into a power outlet once connec- tions are completed. The rear panel configuration is variable depending on the models (countries or area). 123Assemble.GND FM 75. AM ANTENNA GND FM 75. AM ANTENNA 7System connection 7System connection Speakers Speaker (left)Speaker (right) Speaker cord · . · . . Never short-circuit the “+” and “–” speaker cords. . If the left and right speaker connections or the “+” and “–” polarity are inverted, the sound will be unnatural with unclear positioning of musical instruments, etc. Be sure to connect them properly. + - FRONT SPEAKERS (6-16.) R L . + . + The speaker illustration is of the XD-653. System Name Speaker Model Name XD-303 LS-N303 XD-353/XD-A33 LS-N353 XD-503 LS-N503 XD-553/XD-A53 LS-N553 XD-653 LS-N653 XD-753/XD-A73 LS-N753 Main Unit Preparation section 1 234 Twist Speaker Unit (XD-653 only) 1 234 Twist CAUTION (For U.S.A., U.S.-Military and Canada) Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard. . Do not place any objects impairing heat radiation onto the top of unit. NotesNotesNotes 1.Be sure to insert all connection cords securely. If their connections are imperfect, the sound may not be produced or noise may interfere. 2.Before plugging or unplugging a connection cord, be sure to unplug the power cord from the wall AC outlet. If connection cords are plugged or unplugged with the power cord left plugged in, malfunction or damage may result. Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been made properly, reset the microcomputer. Refer to “In case of difficulty”. E Speaker and TV installation The magnet in the speaker may cause color irregularity on the TV. Place the speaker farther away from the TV set. CAUTION Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard. • Do not place any objects impairing heat radiation onto the top of unit. • Leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown below. Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm 8 System connection 8 System connection Connection with other components (optional or commercially-available equipment) Preparation sectionL R DVD/VIDEO INPUT DIGITAL OUT OPTICAL Cap Remove the cap and plug the optical-fiber cable. Optical-fiber cable (Provided with the MD recorder) . Insert the optical-fiber cable straight into the connector until it clicks. . Be sure to attach the protection cap when the connector is not used. . Never bend or bundle up the optical-fiber cable. CAUTION Note on Connection Connect the components as shown in the diagram. Only plug the power cord into a power outlet once connec- tions are completed. The rear panel configuration is varies depending on the model (countries or area). Optical-fiber cable MD recorder, DVD player, VCR or analog turntable DIGITAL OUT OPTICAL jack MD recorder DVD player/VCR/analog turn- table (P-110/optional) Audio output Digital input Audio output .. DIGITAL OUT OPTICAL For XD-753/653/XD-553/503 (Europe and U.K. only) NoteNoteNote When an external system component is connected, please read the instruction manual of the component as well. 9System connection Preparation section Surround (rear) speakers This switch can be used only when the separately sold surround (rear) speakers are connected. When the switch is set to ON, surround playback can be enjoyed. When this switch is set to OFF, normal playback is ex- ecuted. .Please operate this switch while the power is switched off. .We recommend that this switch be set to OFF when no surround (rear) speakers are connected to obtain a better sound quality. .When the switch is set to OFF, no sound will come from the surround (rear) speakers. With regards to the SURROUND switch R L Surround switch Lead the 75.coaxial cable connected to the FM out- door antenna into the room and connect it to the FM 75.terminal. FM outdoor antenna Use a commercially-available antenna adapter (a small-sized model). Except for U.S.A. and Canada · . · . ON OFF SURROUND GND FM 75. AM ANTENNA +- SURROUND SPEAKERS (8-16.) R L ON OFF SURROUND .+.+ Main Unit 1 234 Twist Speaker Unit 1 234 Twist DISC 1 DISC 2 DISC 3 STANDBY TIMER DI...
Ce manuel est également adapté pour les modèles :Stéréo - XD-303 (1.12 mb)
Stéréo - XD-503 (1.12 mb)
Stéréo - XD-553 (1.12 mb)
Stéréo - XD-653 (1.12 mb)