Évaluations - 4, GPA: 3.8
(
)
)
|
Facilité d'utilisation
Preset stations can also be recalled using the numeric keys of the remote control unit. 28 Let's record 28 Let's record XD-SERIES (En) NoteNoteNote Note that this cassette deck cannot record onto Recording on TAPE Metal tapes. When equalizer or another effect is applied to the sound, the sound with the applied effect can be recorded. i 11 55 33 44 22 Basic section 1. Load a cassette tape. (Recording is available on deck B only.) O Differentiation between normal 1 Open the door of deck B. (TYPE ) and high (TYPE ) tape is 0 2 Insert a tape. PUSH set automatically. 3 Close the door. OPEN . Remove tape slack before loading. 11 A 2. Select the tape transport direction. To reverse the transport direction & A #A # 22 1 Select deck B by pressing the O When recording is started, the A/B key. tape is transported in the direction 2 Press the play key correspond-selected in this step. O Wind the tape to the position ing to the desired direction. where recording is to be started. 3 Stop playback (by pressing the & key). Check the tape transport direction indicator. . REV. MODE DOLBY NR 33 3. Set the recording condition. 1 Select the reverse mode. » 2 Select the DOLBY NR mode. (XD-5...series only) » O The Tape Equalizer cannot be used in recording. (XD-4...series only) 29Let's record 29Let's record To pause recording (Main unit only) Lights REC/ARM XD-5....series XD-4....series . Pressing the key pauses recording after leaving a non-recorded space of about 4 seconds. . If the key is pressed again in less than 4 seconds after it has been pressed, recording resumes from that instant. Selection of the reverse mode(Main unit only) REV. MODE Each press switches the modes as follows. 1 “ ” .... Recording stops after having recorded both sides of tape. 2 “ ” ... Recording stops after having recorded both sides of tape. 3 “ ” ..... Recording stops after having recorded one side of tape. . When the “2” transport direction indicator is lit, recording always stops after having recorded one side of tape. XD-SERIES (En) Selection of DOLBY NR (Noise Reduction) (Main unit only) (XD-5....series only) The DOLBY NR system minimizes the hiss noise heard when playing tape. When playing a tape prerecorded with DOLBY NR ON, be sure to set the DOLBY NR ON for playback. Lit when “DOLBY NR” is ON. DOLBY NR Each press switches the modes as follows. 1 “1 NR” ON .... DOLBY NR is used. 2 “1 NR” OFF ... DOLBY NR is not used. . Select the DOLBY NR mode according to the recording condition of the tape. Dolby noise reduction manufactured under license from Dolby Laboratories. “DOLBY” and the double-D symbol are trademarks of Dolby Laboratories. Select an input source other 4. Select the source to be recorded. than “TAPE”. 44 1 TUNER (Radio) 2 CD 3 TAPE (This source cannot be recorded.) INPUT 4 MD/DVD (External input) (Input level adjustment u) O If a disc has already been loaded CD01 1:12 when the CD input is selected, it will starts to play automatically. In The input source component to be recorded should be displayed. this case, press the stop (&) key to stop it. Basic section REC/ARM 55 5. Start recording. 1Start recording. 2Play (or tune) the input source to be recorded. O Even if deck A is selected, it is Lights automatically switched to deck B at the start of recording. . Recording stops automatically when the tape side(s) to be recorded have been fully recorded. O Press the stop (&) key of the cas XD-5....series XD-4....series sette deck unit to stop recording. 30 Let's record 30 Let's record XD-SERIES (En) Points in CD recording When recording CD tracks onto a tape, if you leave 1Put the CD player in pause mode. the cassette deck in record-pause mode beforehand, 2Select the track to be recorded with the skip the cassette deck recording can be started at the same (4, .) keys. time as the CD starts to be played. (Synchro record( The CD player pauses at the beginning of ing function) the selected track.) 3Put the cassette deck in Record-pause mode. (Press the REC/ARM key twice.) 4Start playing the CD. (Synchro recording starts.) O Recording stops when the stop (&) key of the CD player is pressed. Basic section Beat cancel function (For Russia) There may be cases in which beat noise interferes with recording of LW broadcasting. In such a case, press the A/B key during recording to reduce or suppress the beat noise. A B 31Let's record 31Let's record XD-SERIES (En) Copying tape (Tape dubbing) The contents of the tape in deck A can be copied onto the tape in deck B. 1 Select the “TAPE” input. 2 Press the stop key. 3 Select “ ” (double-side recording) or “ ” (one-side recording). 4 Select “Tape Dubbing”. Playing tape Recording tape Load tapes in the decks. +Scrolled display (Tape Dubbing) Tiape Dubb Lights INPUT REV. MODE The DOLBY NR or TAPE EQ. key is ineffective during dubbing. The tape recorded on deck B assumes the same Dolby NR condition as the tape played on deck A. MENU SELECT MULTI CONTROL & A #A # The following items can be selected by turnin...
Ce manuel est également adapté pour les modèles :Stéréo - XD-452 (1.8 mb)
Stéréo - XD-502 (1.8 mb)
Stéréo - XD-552 (1.8 mb)
Stéréo - XD-572S (1.8 mb)