Évaluations - 4, GPA: 3.8 ( )

Fabricant : Kenwood Taille : 3.43 mb Nom Fichier : Langue d'enseignement:

This function can be made active or not active by the following operation. 1 Press the TIMER key. TIMER 2 Select “AUTO POWER SAVE” and press the SET key. MULTI CONTROL SET SLEEP TIME SET O.T.T. PROG. ON/OFF PROG. 1 PROG. 2 AUTO POWER SAVE 3 Select “ON” or “OFF” and press the ENTER key. MULTI CONTROL ENTER (AUTO POWER SAVE) TPOWEROTUA| Scrolled display ON ..... Auto power save is used. OFF .... Auto power save is not used. RETURN OThis function is not available when the AUX input is selected. When the TUNER input is selected, it is available only when the volume is set to 0. Basic section 22 Let's put out some sound 22 Let's put out some sound XD-SERIES (En) Playback of CD Basic section 1Open the tray. 2Place a disc. 3Close the tray. If a disc has already been loaded in the CD player and the power is OFF, simply pressing the CD play key turns power automatically ON and starts playback. The tray opens when the key is pressed Playback from desired track High-speed search in forward and reverse directions The label must be on top. Skipping tracks Playback form desired track 1. Load a disc. 11 22 TIME To stop Playback 0 11 Disc played first when the 6 key is pressed. and closes when the key is pressed again. 2. Start playback. 22 6 OAfter a few seconds, play starts from track No.1. Time display on the CD player Each press of the TIME key of the remote control unit switches the displayed time information. 1 2 123: -237: Elapsed time of track being played Remaining time of track being played 3 2345: Elapsed time of disc (TOTAL lights up) OOnly the time information related to the track being played can be displayed in the program, CD EDIT and random modes. 4 -3615: Remaining time of disc (TOTAL lights up) 23Let's put out some sound 23Let's put out some sound XD-SERIES (En) Skipping tracks MULTI CONTROL To skip backward To skip forward OThe tracks in the direction the dial is rotated are skipped, and the selected track will be played from the beginning. OWhen the jog dial is rotated a little in the direction of counterclockwise once during playback, the track being played will be played from the beginning. OThe CD tracks can also be skipped using the 4 or . key of the remote control unit and amplifier/tuner unit. Playback from desired track Select the disc. Select the desired track No. DISC 1 DISC 2 123 Main unit 456 DISC 3 789 DISC SKIP 0 +10 Remote control unit Press the numeric keys as shown below.... To enter track No. 23 : 003 To select track No. 40 : 0000) High-speed search in forward and reverse directions TUNING Backward search Forward search Remote control unit OPlayback starts from the position where the key is released. To pause playback 6 OEach press pauses and plays the CD alternately. To stop playback 7 Basic section ODo not touch the played side of disc. ORotate the tray with the DISC SKIP key to insert the third disc. OThe tray of the disc to be played should come to the left position when the unit is seen from the front. The selected disc is indicated. Lights when a disc is inserted at 3121 0000DC the time of playback. The recorded track No. are shown. XD-SERIES (En) 24 Knowledge sections Application section Basic section Preparation section 3 1 1 2 Playback of tape 1Open the door. 2Insert a tape and close the door. If you load a tape in a cassette deck (deck B) while the power is off, simply pressing the tape play key turns power automatically ON and starts playback with deck B. Let's put out some sound Selection of Dolby NR To wind tape at high speed To stop playback Selection of reverse mode 1. Load a cassette tape. 2. Select the deck to be used for playback. 3. Start playback. Press the play key of the desired direction. Start playback To stop playback 1 0 PUSH OPEN A A A/B 2 1 2 7 3 A 3 25 Let's put out some sound 25Let's put out some sound XD-SERIES (En) To wind tape at high speed To fast wind in direction | To fast wind in direction \ 3 A 21 7 OPress the & key to stop fast winding. Selection of reverse mode. REV.MODE Each press switches the modes as follows. 1 “[”... Both sides are played back (recorded), and then the tape stops. 2 “O” .. Both sides are played back endlessly. (The tape stops after recording onto both sides.) 3 “O” .. Only one side is played back (recorded), and then the tape stops. Basic section Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. ONormal (TYPE ), high (TYPE ), or metal (TYPE ) tape selection is set automatically. ORemove tape slack before loading. OClose the door securely. Displays the selected deck. To stop playback 7 ODo not take out the cassette tape until the tape transport has stopped completely. Selection of DOLBY NR (Noise Reduction) The Dolby NR system minimizes the hiss noise heard when playing tape. When playing a tape prerecorded with Dolby NR ON, be sure to set the DOLBY NR ON for playback. Lit when “DOLBY NR” is ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :