Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
.3 RANDOM P.CALL 4 1 . . 3 7 Random play (Remote control operation) The tracks on the disc(s) can be played in random order automatically. 1 Load a disc(s) and close the disc tray. 2Press the RANDOM button to begin random play. • “RDM” will light up. Notes : • If you press the P. CALL . . button during random play, you can move to another track. On the other hand, the P. CALL 4 1 button does not allow you to move to the previous track. The beginning of the track being played will be located. • When using random play, be sure to press the 7 STOP button after you are through listening. Otherwise, the disc(s) will play continuously. • In random play the unit will select and play tracks automatically. (You cannot select the order of the tracks.) To cancel random play : Press the 3 button. Tracks Skipping Tracks skipping will automatically locates the beginning of any track. To listen again to the track being played : Press the P. CALL 4 1 button for less than 0.5 second during playback. To move to the beginning of the next track : Press the P. CALL . . button for less than 0.5 second during playback. • To skip a number of tracks at one time, press the P. CALL 4 1 or . . button repeatedly until the desired track number is shown. • To start playback from a desired track, press the P. CALL 4 1 or . . button whilst in the stop mode to select the track number, and then press the 3 button. Note : Tracks skipping can only search for music on a single disc. 15 EN Cue and review 7 STOP 7 3 3 7 STOP P.CALL 4 1 . . P.CALL 4 1 . .7 1 Load a disc and begin playback. 2 Hold down the P. CALL . . button for audible fast forward, and hold down the P. CALL 4 1 button for audible fast reverse. 3 Normal playback will resume when the P. CALL 4 1 or . . button is released. Notes : • When the end of the disc is reached whilst cueing, “END” will appear in the display and CD operation will be paused. (Even though the next disc has been loaded, the disc will not be switched.) Press the P. CALL 4 1 button for fast reverse or press the 7 STOP button to stop CD operation. • If the beginning of the disc is reached whilst reviewing, the mode will automatically switch to normal playback at that point. Repeat play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. To repeat all tracks on up to 3 discs : Press the 3 button twice. • “RPT.” will light up. To repeat a programmed sequence : 1 Programme a sequence of up to 32 tracks. 2 Press the 3 button again. • “RPT.” will light up. To cancel repeat play : Press the 3 button again. • “RPT.” will goes off. Note : • When using repeat play, be sure to press the 7 STOP button after you are through listening. Otherwise, the CD(s) will play continuously. 16 EN 1 2 2 3 3 5 5 CLEAR 1 2 2 3 3 5 5 CLEAR Program Playback You can playback the tracks on the CDs in the disc 1-3 position in any order desired. By specifying the disc numbers from 1 to 3, and the track numbers from 1 to 99, you can choose up to 32 selections for playback in the order you like. 1 When in the stop mode, use the disc number buttons (DISC 1 - DISC 3) to select the desired disc number. 2 Press the P. CALL 4 1 or . . button to select the desired track. 3 Press the MEMORY/SET button. • “PGM” will light up to show that the programmed sequence is being entered into memory. 4 Repeat steps 1 -3 for any other track. Up to 32 tracks can be programmed. • If you make a mistake whilst in the programming mode (“PGM” will light up) or if you wish to change your selections, the programmed tracks can be cleared by pressing the CLEAR button. The tracks will be cleared sequentially, starting with the last track entered. 5 Press the 3 button to start playback of programmed selections. To clear the programmed selections : Press the CLEAR button on the remote control whilst the disc is stopped. • Each time the button is pressed, one track will be cleared, beginning with the last track programmed. Notes : • Opening the disc tray automatically cancels the programmed sequence. • Even if you press the POWER / ON/STANDBY button to enter the standby mode or the function is changed from CD to some other function, the programmed selections will not be cleared. • During program playback operation, random play is not possible. 17 EN RADIO OPERATION 4 1 2,3, 5,6 2,3, 5,6 4 1 After use : Press the POWER / ON/STANDBY button to enter the standby mode Note : • The last station turned in will be recalled, even after changing the tuning band or the function, or after switching the unit to the standby mode. Tuning 1 Press the POWER / ON/STANDBY button to turn the power on. 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) button to select the desired frequency band. (FM ST, FM or AM) 4 Press the TUNING/TIME (%UP or fiDOWN) but ton to tune into the desired station. Manual tuning : Press the TUNING/TIME (%UP or fiDOWN) button as many times as required to adjust the frequency shown on the display to the frequency of the desired station....
Ce manuel est également adapté pour les modèles :Stéréo - XD-A75 (1.64 mb)