Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Presetting radio stations You can store up to 40 preset radio stations in the memor y, star ting from FM and followed by MW bands. Notes: – The system will exit presetting mode if no button is pressed within 20 seconds. – If no stereo frequency is detected during Plug and Play, “CHECK ANTENNA” is displayed. Using the plug and play (page 3 - P3) Plug and Play allows you to store all available radio stations automatically. 1 Connect the system to the power supply, “AUTO INSTALL - PRESS PLAY” is displayed. OR In Eco Power standby/standby mode, press and hold EAon the main unit until “AUTO INSTALL - PRESS PLAY” is displayed. 2 Press EA on the main unit to star t installation. . “INSTALL TUNER” is displayed. . All previously stored radio stations will be replaced. . Once completed, the last tuned radio station will be played. . Once completed, the last tuned radio station (or the first available RDS station) will be played. 3 If the first preset is a RDS station, it will proceed to set the RDS clock. . “INSTALL” is displayed, followed by “TIME” and “SEARCH RDS TIME”. . When RDS time is read, “RDS TIME” is displayed and the current time will be stored. . If RDS station does not transmit RDS time within 90 seconds, “NO RDS TIME” is displayed and the programme will exit automatically. Automatic presetting You can star t the automatic presetting from a selected preset number. 1 In tuner mode, press i or e to select a preset number. 2 Press and hold PROGRAM (PROG) until “AUTO” is displayed. . If a radio station has been stored in one of the presets, it will not be stored again under another preset number. . If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden. Manual presetting You can choose to store only the favourite radio stations. 1 Tune to your desired radio station (refer to “Tuning to radio stations”). 2 Press PROGRAM (PROG). . The preset number star ts flashing. If you want to store the radio station in another preset number, press i or e. 3 Press PROGRAM (PROG) again to store. . Repeat steps 1–3 to store other radio stations. 22 Tuner Operations Selecting a preset radio station . In tuner mode, press i or e. . The preset number, radio frequency, and waveband are displayed. Deleting a preset radio station . Press and hold C until “PRESET DELETED” is displayed. . The current preset radio station will be deleted. . All other preset radio stations with higher numbers are decreased by one. RDS RDS (Radio Data System) is a ser vice that allows FM stations to show additional information. If you are receiving a RDS station, RDS and the station name are displayed. Scrolling through RDS information . Tuned to a RDS radio station from FM band, then press RDS•NEWS repeatedly to select the following information (if available): – Station name – Programme type (for example: News, Affairs, Spor t, etc.) – Radio text messages – Frequency Setting the RDS clock Some RDS radio station may be transmitting a real clock time at an inter val of every minute. It is possible to set the clock by using a time signal which is broadcast together with the RDS signal. 1 Tune to a RDS station from FM band (refer to “Tuning to radio stations”). 2 Press and hold CLK/TIMER (or CLOCK•TIMER on main unit) until “SELECT CLOCK OR TIMER” is displayed. 3 Press e to change the display to “CLOCK” and press CLK/TIMER (CLOCK•TIMER) again to confirm. 4 Press RDS•NEWS. . “SEARCH RDS TIME” is displayed. . When RDS time is read, the current time will be stored. . If the RDS station does not transmit RDS time within 90 seconds, “NO RDS TIME” is displayed. Note: – Some RDS radio stations may be transmitting a real time clock at a minute interval. The accuracy of the transmitted time depends on the transmitting RDS radio station. English 23 Tuner Operations English NEWS You may set up the tuner in such a way that listening to CD or external source is interrupted by the NEWS of a RDS station. This only works if the RDS station broadcasts a NEWS signal while sending the news. IMPORTANT! You can activate NEWS function from any source mode except TUNER. Switching on NEWS function 1 In any active mode, press RDS•NEWS until “NEWS” is displayed. . NEWS is shown. . The system will scan the radio stations stored in the first five (5) presets and wait for the News Programme Type data to be available in any of these RDS stations. . While searching NEWS, the current active mode remains uninterrupted. 2 When NEWS transmission is detected, the system will switch to Tuner mode. . NEWS star ts flashing. . If no RDS station is detected in the first five presets, the system will exit NEWS function. . “NO RDS NEWS” is displayed. Notes: –You have to exit Tuner mode before selecting NEWS function. – Before you activate the NEWS feature, ensure that RDS stations are included in the first five presets. – The NEWS works only once for each activation. To cancel NEWS function . Press RDS•NEWS again or switch the sys...