Évaluations - , GPA:
(
)
)
Fabricant : Philips
Taille : 1.77 mb
Nom Fichier :
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
– mono, 26 dB signal-to-noise ratio ............ 2.8 .V – stereo, 46 dB signal-to-noise ratio ........ 61.4 .V Selectivity ................................................................. . 28 dB Total harmonic distor tion ..................................... . 5% Frequency response ............ 63 – 5500 Hz (-6 dB) Signal-to-noise-ratio ...................................... . 50 dBA SPEAKERS 2-way bass reflex system Woofer ................................................................ 2 x 13 cm Tweeter ................................................................... 1 x 5 cm Dimensions (w x h x d) .................................................... ...................................................... 165 x 410 x 285 (mm) GENERAL INFORMATION AC Power ..................................................... 220 – 230 V; ....................................................................................... 50 Hz Dimensions (w x h x d) ..................................................... ...................................................... 177 x 292 x 341 (mm) Weight(with/without speakers) .......... 17.7 /5.9 kg Standby power consumption ........................ . 15 W Eco Power Standby ................................................... 1 W Specifications and external appearance are subject to change without notice. 36 Problem Problem Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. No power. “NO DISC” is displayed. No picture. Distorted or poor picture. The aspect ratio of the screen cannot be changed even though you have set the TV shape. The DVD player does not start playback. Solution . Check if the AC power cord is properly connected. . Check if the disc is inser ted upside down. . Wait until the moisture condensed at the lens has cleared. . Replace or clean the disc, see “Maintenance”. . Use a readable disc or correctly recorded format MP3-CD. . Select the appropriate video input mode on the TV set. . Check if the TV set is switched on. . Check the video connection. . Check if the system is securely connected. . Sometimes a slight picture distor tion may appear. This is not a malfunction. . Clean the disc. . Connect the system to the S-video input of your TV set. . The aspect ratio is fixed on the DVD disc. . The aspect ratio may not be changed for some TV systems. . Inser t a readable disc. . Check the disc type, color system and region code. . Clean the disc. . Place the disc with the playback side down. . Press SYSTEM MENU to turn off the setup menu. . Cancel the parental control rating function or change the rating level. . Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour. . Disconnect the power plug from the jack, and inser t again. The DVD player does not respond when buttons are pressed. 37 Troubleshooting English Problem Solution . Multi-language sound or subtitle is not recorded on the DVD. . Changing the language for the sound or subtitle is prohibited on the DVD. . Make sure the component is connected correctly. . Press the correct function button for the input source. . Adjust the volume. . Disconnect the headphones. . Check that the speakers are connected correctly. . Check if the stripped speaker wire is clamped. . If the system is in pause, slow motion or fast forward/reverse mode, press PLAY/PAUSE 2; to resume the normal play mode. . Make sure the MP3-CD was recorded within 32- 256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz. . Ensure that the DTS disc also suppor ts Dolby Digital output. . If the signal is too weak, adjust the antenna or connect an external antenna for better reception. . Increase the distance between the System and your TV set or VCR. . Check the speaker connections and location. . Point the remote control at the remote control sensor of the unit. . Reduce the distance to the player. . Remove any possible obstacles. . Replace the batteries with new ones. . Check that the batteries are loaded correctly. . Set the clock correctly. . If recording is in progress, stop it . Power has been interrupted or the power cord has been disconnected. Reset the clock/timer. The language for the sound or subtitle cannot be changed when playing a DVD. No image is output when a function is selected. Sound cannot be heard or is of poor quality Poor radio reception. Left and right sound outputs are reversed. The remote control does not function. The timer is not working The Clock/Timer setting is erased 38 Glossary Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values.These jacks send...