Évaluations - , GPA: ( )

Instructions Philips, Modèle FW355C/22S

Fabricant : Philips
Taille : 735.41 kb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

preparation procedures. . If you do not complete the Plug and Play installation, the function will be restar ted when you next turn on the main supply again. Plug and Play Plug and Play allows you to store all available Notes: radio stations automatically. – When the power is turned on, the disc tray may open and close to initialise the system. First time setup/power up – If no stereo frequency is detected during 1 When you turn on the main supply, "AUTO Plug and Play, "CHECK ANTENNA" will be INSTALL -PRESS PLAY" is displayed. displayed. 2 PressEA on the system to star t installation. – During Plug and Play, if no button is pressed . "INSTALL" is displayed, followed by "TUNER" within 15 seconds, the system will exit Plug and and "AUTO". Play mode. . PROG star ts flashing. . All available radio stations with sufficient signal strength will be stored automatically, star ting from FM and followed by MW band. . When all the available radio stations are stored or the memor y for 40 presets are used, the last preset radio station will be played. To reinstall Plug and Play 1 In standby or demonstration mode, press and holdEAon the system until "AUTO INSTALL -PRESS PLAY" is displayed. 2 PressEA again to star t installation. . All previously stored radio stations will be replaced. 12 3139 115 21381 pg 001-029/C355/21-Eng 12 12/24/01, 11:17 AM Basic Functions Demonstration mode The system has a demonstration mode that shows the various features offered by the system. To activate the demonstration . In standby mode, press and holdCon the system until "WELCOME" is displayed. . The demonstration will begin. To deactivate the demonstration . Press and holdCon the system until "DEMO OFF" is displayed. . The system will switch to standby mode. Note: – If you have not deactivated the demonstration, it will resume five seconds after the system switches to standby mode. Switching the system on In standby/demonstration mode . Press STANDBY ON to switch on the last selected source. . Press CD 1/2/3, TUNER, TAPE (TAPE 1/2) or AUX (AUX/CDR). . Press OPEN/CLOSE. . The system will switch to CD mode. Switching the system to standby mode In demonstration mode . Press and hold C on the system. In any other source mode . Press STANDBY ON (or B on the remote control). . The clock will appear on the display when the system is in standby mode. Dim mode You can select the desired brightness for the display. . In any source mode (except standby mode), press DIM repeatedly to select : DIM 1, DIM 2, DIM 3 or DIM OFF display mode. . DIM is shown, except for DIM OFF mode. DIM mode Brightness Spectrum Analyser 1 normal off 2 half on 3 half off OFF normal on Note: – In standby mode, pressing DIM to select half or full brightness for clock display. Volume control Adjust MASTER VOLUME (or press VOL + or -on the remote control) to increase or decrease the volume level. To listen through the headphones . Connect the headphones plug to the n socket at the front of the system. . The speakers will be muted. MIC To switch off the volume temporarily . Press MUTE on the remote control. . Playback will continue without sound and "MUTE" is displayed. . To restore the volume, press MUTE again or increase the volume level. English 13 3139 115 21381 pg 001-029/C355/21-Eng 13 12/24/01, 11:17 AM Basic Functions English Sound control Digital Sound Control (DSC) The DSC feature enables you to enjoy special sound effects that have preset equaliser settings, providing the best music reproduction. 1 Press DSC. . The selected DSC is shown. 2 Adjust the jog control (or press DSC on the remote control repeatedly) to select : JAZZ, ROCK,TECHNO or OPTIMAL. Automatic DSC-DBB selection The best DBB setting is generated automatically for each DSC selection. You can manually select the DBB setting that best suits your listening environment. DSC DBB JAZZ off ROCK on (3) TECHNO on (3) OPTIMAL on (2) DISC NGE IGITALSOUNDCONTROLDYNAMIC BASS BOOST 2 1 1 Dynamic Bass Boost (DBB) There are three DBB settings to enhance the bass response. 1 Press DBB. . The selected DBB is shown, except for DBB OFF mode. 2 Adjust the jog control (or press DBB on the remote control repeatedly) to select : DBB 1, DBB 2, DBB 3 or DBB OFF. Note: – Some discs or tapes might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume. 14 3139 115 21381 pg 001-029/C355/21-Eng 14 12/24/01, 11:17 AM 15 English 3139 115 21381 CD Operation FW- MINI HIFI SYSTEM 3CD CHANGER CD/CD-R /CD-RW COMPATIBLE TUNER TAPE AUX BAND TAPE 1 • 2 VIDEO DIGITAL SOUND DISPLAY STANDBY-ON DSC OPEN/ CLOSE DISC CHANGE CD OPTIMAL JAZZ TECHNO ROCK CD 1 CD 2 CD 3 DIM DIGITAL SOUND CONTROL DYNAMIC BASS BOOST STOP•CLEAR / DEMO STOP SEARCH•TUNING PLAY• PAUSE SEARCH•TUNING PRESET NEXT/ PRESET PREV/ PROG CLOCK•TIMER DSC DBB MUTE 2 CD 1/2/3 REPEAT SHUFFLE SLEEP TUNER TAPE 1/2 AUX/CDR MUTE NEWS/TA a a i e C EA VOL SLEEP AUTO REPLAY RECORD MASTER VOLUME MIC MIC LEVEL IMPORTANT! – T...