Évaluations - 5, GPA: 3.8
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
STEREO AUTO ALL DISC S Each time you press this button, the band changes as follows: The bands you can select depend on the LBT-XB5/XB6 3,5 1 246POWER kind of tuner built into your system. Confirm the bands by pressing TUNER/ BAND repeatedly. 3 band model: FM nMW nLW n 4 band model: FM nMW nLW nUKV* n * When you select this band, “STEREO PLUS” appears in the display. DISCALL DOLBY NR OFF AUTO TUNED STEREO S 6 Press ENTER/NEXT. The station is stored. 7 Repeat steps 1 through 6 to store other stations. 2 Press TUNING MODE repeatedly until “AUTO” appears in the display. 3 Press TUNING +/–. The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo programme) appear. LBT-XB3 DOLBY NR OFF TUNED STEREO AUTO ALL DISC S MHz To tune in a station with a weak signal Press TUNING MODE repeatedly until “MANUAL” appears in step 2, then press TUNING +/– to tune in the station. Note The preset stations are cancelled when you disconnect the mains lead or a power failure occurs for half a day. Connecting surround speakers (LBT-XB6 only) Connecting optional You can connect optional surround speakers. AV components To enhance your system, you can connect optional components. Refer to the instructions included with each component for details. Connecting audio components Connecting a turntable Be sure to match the colour of the plugs and the connectors. To listen to the sound from the connected turntable, press FUNCTION repeatedly until “PHONO” appears. To the audio output of the turntable Note Using the turntable at high volume may cause distortion or howling. This is often caused by the bass sound from the speakers. The bass sound may be picked up by the needle of the turntable, and produce the distortion or howling. To avoid this, do the following: 1 Keep some distance between the speakers and the turntable. 2 Stop using the surround effect. 3 Install the speakers or the turntable on a firm and stable surface. 4 Press DBFB repeatedly until “DBFB ” disappears from the display (LBT-XB3/XB5 only). Press SUPER WOOFER repeatedly until the indicator on this button goes off (LBT-XB6 only). To surround To surround speaker (R) speaker (L) Note You need to connect both left and right surround speakers. Otherwise, the sound will not be heard. Connecting a VCR Be sure to match the colour of the plugs and the connectors. To listen to the sound from the connected VCR, press FUNCTION repeatedly until “VIDEO” appears. To the audio output of the VCR Connecting outdoor aerials Connect an outdoor aerial to improve the reception. FM aerial Connect an optional FM outdoor aerial using a 75-ohm coaxial cable and IEC standard socket connector. You can also use the TV aerial instead. IEC standard socket (not supplied) Screw clamp Ground wire (not supplied) FM 75COAXIAL AM AM aerial Connect a 6 to 15 meter (20 to 50 feet) insulated wire to the AM aerial terminal. Leave the supplied AM loop aerial connected. Screw clamp Insulated wire (not supplied) FM 75COAXIAL AM Ground wire (not supplied) Important If you connect an outdoor aerial, connect a ground wire to the yterminal with the screw clamp. To prevent a gas explosion, do not connect the ground wire to a gas pipe. DOLBY NR OFF ALL DISC S Track number Elapsed time LBT-XB5/XB6 Disc number in the playing position DOLBY NR OFF ALL DISC S Track number Elapsed time LBT-XB5/XB6 Disc number in the playing position Basic Operations 1234 P aVOLUMEPOWER Playing a CD — Normal Play You can play up to five CDs in a row. p 1/ALL DISCS Jog dial 1/ALLDISCS PLAYMODE REPERT EDIT A S ) 0 DISC SKIP P p AMS =/+ 0/) CD ( VOLUME +/– 1 Press 6OPEN and place a CD on the disc tray. If the disc is not placed properly it will not be recognised. With the label side up. When you play a CD single, place it on the inner circle of the tray. »» 6Pr0) 6 » Pp »» p0)p)0 2 Press DISC SKIP to place up to four more CDs on the tray. The disc tray rotates so you can insert other CDs. 3 Close the front cover. 4 Press one of the DIRECT PLAY buttons. Playback starts. If you press a(or CD (on the remote), playback starts from the CD in the playing position. LBT-XB3 Disc number in the playing position Track number Elapsed time DISCALL DOLBY NR OFF S To Do this Stop playback Press p. Pause Press P. Press again to resume playback. Select a track During playback or pause, turn the jog dial clockwise (to go forward) or anticlockwise (to go backward) and release it when you reach the desired track. Or press AMS* +(to go forward) or AMS* =(to go backward) on the remote. Find a point in a Press and hold ) or 0 track during playback, and release at the desired point. Select a CD Press one of the DIRECT PLAY buttons (or DISC SKIP). Play only the CD Press 1/ALL DISCS repeatedly you have until “1 DISC” appears. selected Play all CDs Press 1/ALL DISCS repeatedly until “ALL DISCS” appears. Remove or Press 6 OPEN. change the CDs Adjust the Turn VOLUME (or press volume VOLUME +/– on the remote). * ...
Ce manuel est également adapté pour les modèles :Stéréo - LBT-XB5 (668.13 kb)
Stéréo - LBT-XB6 (668.13 kb)