Évaluations - 5, GPA: 3.8
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
6 Press a(or CD aon the remote). All the tracks play in the order you selected. To cancel Programme Play Press TUNING/PLAY MODE on the remote repeatedly until “PGM” disappears from the display. To Do this Add a track to the end During stop, do steps of the programme 3 and 4. Clear the entire Press .on the player programme during stop. . Tips • The programme you created remains in the CD player’s memory until you turn off the power or remove a CD. Press ato play the same programme again. • If the total playing time has exceeded 100 minutes, the order of the programme is displayed instead of the total playing time. • If you try to programme more than 24 tracks, “FULL” appears in the display. The Tape Deck The Tape Deck Recording On a tape manually You can record tracks from CD, radio, or the connected component as you like. For example, you can record just the songs you want or record from the middle of the CD. 1/u (Power) REC lamp 6 2 1 1/u (Power) 6 p 4 5 1 Insert a blank tape into the deck. 2 Press FUNCTION repeatedly until the source you want to record (e.g., CD) appears. 3 Start playing the source to be recorded. 4 Press rREC on the remote. The deck stands by for recording and the REC lamp on the unit lights up red. 5 Press DIR MODE on the remote repeatedly to select to record on one side or to record on both sides. 6 Press .. Recording starts from the front side. To Press Stop recording ... Press .again to stop playing the CD. Pause recording .. Tips • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR on the remote before step 6 so “a” appears. • When you press rREC during stop of the CD, CD synchro recording starts (see “Recording a CD” on the page 14). Recording CD by specifying the track order — Programme Edit You can record tracks from the CD in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. 1/u (Power) 1 REC lamp CD SYNC lamp 12 3 5 2 1/u (Power) p 8,12 5 10 11 4 6 1 Place a CD and close the glass door. 2 Insert a blank tape into the deck. 3 Press FUNCTION repeatedly until “CD” appears. 4 Press TUNING/PLAY MODE on the remote repeatedly until “PGM” appears. 5 Press .or a±(or / ±on the remote) until the desired track appears. PGM Track number Total playing time (including selected track) 6 Press ENTER on the remote. 7 Repeat steps 5 and 6 to programme additional tracks to be recorded on side A in the order you want them to be recorded. 8 Press .on the remote to insert a pause at the end of side A. 9 Repeat steps 5 and 6 to programme the tracks to be recorded on side B. 10Press rREC on the remote. The deck stands by for recording and the CD SYNC and REC lamps on the unit light up red. continued Recording CD by specifying the track order (continued) 11Press DIR MODE on the remote repeatedly to select to record on one side or to record on both sides. 12Press .. Recording starts from the front side. After about 10 seconds, the CD starts playing. To stop recording Press .. To cancel Programme Edit Press TUNING/PLAY MODE on the remote repeatedly until “PGM” disappears from the display. 24 Sound Adjustment Sound Adjustment Activating the bass sound You can reinforce the bass to create a more powerful sound. 1/u (Power) DBFB lamp Activating the sound effect You can adjust the sound according to your taste or room situation. 1/u (Power) NEAR F. lamp WIDE lamp SOUND MODE 1/u (Power) DBFB /Press DBFB*on the remote. The DBFB lamp on the unit lights up red. * DBFB = Dynamic Bass Feedback To cancel DBFB Press DBFB again. The DBFB lamp on the unit turns off. /Press SOUND MODE. Each time you press this button, the following LED lamp lights up red. NEAR F. nWIDE nLED off n When you select You can NEAR F. Create simulated stereo surround effects for background music. WIDE Spread the sound all around the room. LED off Return to the normal stereo sound. Other Features Other Features Falling asleep to music — Sleep Timer You can set the system to turn off at a preset time, so you can fall asleep listening to music. You can preset the remaining time in 10 minute increments. SLEEP /Press SLEEP. Each time you press this button, the minutes display (the remaining time) changes as follows: Waking up to music — Daily Timer You can wake up to music at a preset time every day. Make sure you have set the clock (see “Step 2: Setting the time”). 1/u (Power) 2 (AUTO) n90min n80min OFF N10min ..N60min N70min 9 When you choose AUTO 4,5,7 The power turns off when the current CD or tape finishes playback (up to 100 minutes). The power turns off if you manually stop playing a CD or tape. To check the remaining time 4,5,8 Press SLEEP once. 3 2 To change the remaining time TIMER Press SLEEP repeatedly to select the time you SELECT want. To cancel the Sleep Timer function Press SLEEP repeatedly until “SLEEP” disappears. N N 1 Prepare the music source you want 8 Press ENTER on the remote. to play. • CD: Insert a CD. ...
Ce manuel est également adapté pour les modèles :Stéréo - CMT-ED1 (327.25 kb)