Évaluations - 3, GPA: 3.3
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Insert only the stripped portion. Front speaker (Left) 2 Connect the speaker cords from the surround speakers to the appropriate SURROUND SPEAKER jacks. Connect the solid cords to the red jacks and connect the striped cords to the black jacks. + – R L Red (O) Black (O) When using a TV When using a TV Keep the speaker cords away from the Jack type B antennas to prevent noise. Extend the FM lead antenna horizontally. Insert only the stripped portion. L Solid (O) Stripe (O) + – R Notes FM75COAXIAL AM AM loop antenna • Do not place the surround speakers on top of a TV. This may cause distortion of the colors in the TV screen. 3 Connect the video input jack of your • Be sure to connect both left and TV to the VIDEO OUT jack with the right surround speakers. Otherwise, supplied video connecting cable. the sound will not be heard. 2 Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. Jack type A Extend the FM lead antenna horizontally. AM loop antenna FM75 AM Turn on the TV and select the video input so you can view the pictures from this system. Tip For even higher quality video images, you can use an optional S VIDEO cord to connect the S VIDEO input jack on your TV to the S VIDEO OUT jack continued Step 1: Hooking up the system (continued) 4 Set SYSTEM SELECT (color system) to the appropriate position (PAL or NTSC), according to your TV. SYSTEM SELECT AUTO PALNTSC If your TV automatically changes the color system according to the input signal: The factory setting (AUTO) automatically changes the color system of the video output according to the color system of the current VIDEO CD. If the color system of your TV is NTSC: Set SYSTEM SELECT to NTSC. Pictures recorded in the PAL color system will be stretched vertically and will be displayed with the upper and lower parts of the picture cut off. If the color system of your TV is PAL: Set SYSTEM SELECT to PAL. Pictures recorded in the NTSC color system will be stretched horizontally and will be displayed with the upper and lower parts of the screen masked in black. Note Be sure to turn off the system before changing the SYSTEM SELECT setting. 5 Set VOLTAGE SELECTOR to position of your local power line voltage (for models with a voltage selector). VOLTAGE SELECTOR 220V120V 230 240V- 6 Connect the power cord to a wall outlet. Demo mode appears in the display. 7 Deactivate the demo mode by pressing DEMO when the system power is turned off. The demo mode is also deactivated when you set the time. To attach the front speaker pads Attach the supplied front speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. Inserting two size AA (R6) batteries into the remote Using the remote You can use the shaded buttons shown below to operate Sony TV. TV TV/VIDEO TV VOL +/– TV CH +/– To Press Turn the TV on or TV . off Switch the TV's TV/VIDEO. video input Change the TV TV CH +/–. channels Adjusts the volume TV VOL +/–. of the TV speaker(s) Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. When carrying this system Do the following to protect the CD mechanism. 1 Press FUNCTION repeatedly until “CD” appears in the display. 2 Hold down CD LOOP and press so that “LOCK” appears in the display. Step 2: Setting the time You must set the time before using the timer functions. 1 2,4 3,5 DEMO 1 Press CLOCK/TIMER SET. The hour indication flashes. 2 Turn the jog dial to set the hour. 3 Press ENTER/NEXT. The minute indication flashes. 4 Turn the jog dial to set the minute. 5 Press ENTER/NEXT. The clock starts working. Tips • If you’ve made a mistake, start over from step 1. • Setting the time deactivates the demo mode. If you want to display the demo mode, press DEMO when the power is off. Note The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the following: 1 Press CLOCK/TIMER SET. 2 Turn the jog dial to select “SET CLOCK”. 3 Press ENTER/NEXT. 4 Perform steps 2 through 5 above. Step 3: Presetting radio stations You can preset the following number of stations: 20 for FM, 10 for MW, and 10 for SW. (Power) 4 513 2 1 Press TUNER/BAND repeatedly until the band you want appears in the display. The bands you can receive vary depending on the model you purchased. Be sure to check which bands you can receive. Every time you press this button, the band changes as follows: FM nMW nSW 2 Press and hold + or – until the frequency indication starts to change, then release. Scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear. MONO TUNED STEREO ALL DISCS kHz MHz . VOLUME 3 Press TUNER MEMORY. A preset number appears in the display. Preset number VOLUME ALL DISCS § 4 Turn the jog dial to select...