Évaluations - 3, GPA: 3.3
(
)
)
|
Facilité d'utilisation
To the digital input of the MD deck Connecting an MD deck for analog recording Be sure to match the color of the plugs and the connectors. To listen to the sound of the connected MD deck, press FUNCTION repeatedly until “MD” appears. Refer to the instructions included with your MD deck for details. To the audio outputs To the audio inputs of of the MD deck the MD deck continued Connecting audio components (continued) Connecting a mixer (for European, North American, and Mexican models only) You can connect a mixer to the DJ MIX jacks on the rear panel of the unit. To the outputs To the inputs of the mixer of the mixer 1 Remove the jumpers from the unit. 2 Connect the SEND jack of the unit to the IN jack of the mixer with an optional cable. 3 Connect the OUT jack of the mixer to the RETURN jack of the unit with an optional cable. 4 Press FUNCTION repeatedly until “CD” appears. You can also record the sound produced by the mixer onto a tape. Note Replace the jumpers when the mixer is not in use. Otherwise, no sound will come from the unit. Be sure to connect the jumpers from the RETURN jack to the SEND jack of the unit. Two jumpers are preinstalled connecting the DJ MIX RETURN and SEND jacks. ANTENNA R PHONO VIDEO 1 VIDEO MD L FM 75 AM IN IN OUT OUT AUDIO IN VIDEO IN DJ MIX R L RETURN SEND Connecting surround speakers (LBT-LX50 only) You can connect optional surround speakers. Refer to the instructions included with your surround speakers for details. To surround To surround speaker (R) speaker (L) Note You need to connect both left and right surround speakers. Otherwise, the sound will not be heard. Connecting a guitar You can connect an electric guitar to the GUITAR jack on the front panel. When you select “MIX GUITAR/ KARAOKE“ by pressing MIX GUITAR/ KARAOKE, you can play along with any stereo CD or tape. To an electric guitar GUITAR LEVEL MIX GUITAR/KARAOKE You can select your preferred sound characteristics by adjusting the GUITAR LEVEL. Connecting video components You can connect a VCR, camcorder, or video game to the VIDEO 1 jack on the rear panel and/or the VIDEO2 INPUT jack on the front panel. To see the picture from the connected components, connect the input jack of your TV to the VIDEO OUT jack with the video connecting cable (not supplied). Connecting a VCR Be sure to match the color of the plugs and the connectors. To listen to the sound from the connected VCR, press FUNCTION repeatedly until “VIDEO 1” appears. Refer to the instructions included with your VCR for details. To the audio outputs To the video output of the VCR of the VCR To the video input of the TV continued Connecting video components (continued) Connecting a camcorder or video game Be sure to match the color of the plugs and the connectors. To listen to the sound from the connected camcorder or video game, press FUNCTION repeatedly until “VIDEO 2” appears. Refer to the instructions included with each component for details. Connecting outdoor antennas Connect an outdoor antenna to improve the reception. Refer to the instructions of each component. FM antenna Connect an optional FM outdoor antenna. You can also use the TV antenna instead. Jack type A To the audio outputs of the component To the video output of the component AM FM 75 75-ohm coaxial cable (not supplied) Jack type BIEC standard socket (not supplied) AM COAXIALFM 75 To the video input of the TV Additional Information Additional Information AM antenna Connect a 6 to 15 meter (20 to 50 feet) insulated wire to the AM antenna terminal. Leave the supplied AM loop antenna connected. Jack type A Insulated wire (not supplied) AM FM 75 Precautions On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply. On safety • The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. • Unplug the system from the wall outlet (mains) if it is not to be used for an extended period of time. To disconnect the cord (mains lead), pull it out by the plug. Never pull the cord itself. • Should any solid object or liquid fall into the Jack type B component, unplug the stereo system and have the component checked by qualified personnel Insulated wire (not supplied) AM COAXIALFM 75 Important before operating it any further. • The AC power cord must be changed only at a qualified service shop. On placement • Place the stereo system in a location with adequate ventilation to prevent heat build-up in the stereo system. • Do not place the system in an inclined position. • Do not place the system in locations where it is; — Extremely hot or cold — Dusty or dirty — Very humid — Subject to vibrations If you connect an outdoor antenna, connect a ground wire to the U terminal with the screw clamp. To prevent a gas explosion, do not connect the ground wire to a gas pipe. — Subject to direct sunlight On operation • If the...
Ce manuel est également adapté pour les modèles :Stéréo - LBT-LX30 (965.32 kb)
Stéréo - LBT-LX5 (965.32 kb)
Stéréo - LBT-LX50 (965.32 kb)
Stéréo - LBT-LX7 (965.32 kb)