Évaluations - 2, GPA: 3
(
)
)
|
Facilité d'utilisation
• MP3 files are played back in the order that they are recorded on the disc. • Depending on the encoding/writing software, recording device, or the recording media used at the time an MP3 file is recorded, you may encounter such problems as disabled playback, sound interruptions, and noise. 16 GB Locating a specific part of a VIDEO CD Locating a specific part of a VIDEO CD —Time Search/Disc Digest The TV screen must be ON to use these functions. To cancel the PBC functions, see “Cancel playback with PBC functions (Ver. 2.0)” on page 14. Use the remote. To stop playback Press x. To enter 10 or over with the number buttons Press the number buttons on the remote (see “To enter a track number over 10” on page 11). Note If you press SPECIAL MENU on the remote to activate Time Search or Disc Digest in Program or Shuffle Play mode, it becomes ALL DISCS (Normal Play) mode. Locating by elapsed time from the beginning of the disc —Time Search 1 Press SPECIAL MENU on the remote in stop mode. 2 Press 1 on the remote to select “1) TIME SEARCH.” 3 Press the number buttons (1 – 10/0) on the remote to enter the time (in minutes) for the section you want. To enter 10 minutes: Press 1 c 10/0. The selected elapsed time appears on the TV screen. To reenter the time: Press CLEAR on the remote, and then press the number buttons again. 4 Press H (or N on the remote). Playback starts from the selected time. Locating the desired track —Disc Digest You can select the track you want by viewing the first frame of each track. 9 different tracks can be displayed on the TV screen at one time. 1 Press SPECIAL MENU on the remote in stop mode. 2 Press 2 on the remote to select “2) DISC DIGEST”. The first frame of tracks 1 through 9 on the current disc are displayed. 3 Press the number buttons (1 – 10/0) on the remote to select the track you want. To display the next 9 tracks Press NEXT on the remote. The first frame of tracks 10 through 18 are displayed. When there are more tracks in the disc, “>” appears in the upper right corner of the TV screen. To display previous tracks, press PREV on the remote. CD/VIDEO CD/MP3 file 17GB Resuming playback from the point you stopped a VIDEO CD —Resume Play The system memorizes the point where you stopped the VIDEO CD so that you can resume from that point. Resume Play is not available for an audio CD and a disc with MP3 files. 1 While playing a VIDEO CD, press x to stop playback. “RESUME” appears on your TV screen. If “RESUME” does not appear, Resume Play is not available. 2 Press H (or N on the remote). The player starts playback from the point you stopped the VIDEO CD in step 1. To view from the beginning of the VIDEO CD When “RESUME” appears on your TV screen, press x, then press H (or N on the remote). Notes • Resume Play is not available in the Digest, Shuffle, or Program Play modes. • Depending on where you stopped the VIDEO CD, the player may resume playback from a different point. • Resume Play is canceled when: – you press the number buttons, PLAY MODE, x, DISC SKIP/EX-CHANGE (or D.SKIP on the remote), or ./>. – you remove the VIDEO CD. – you turn off the system. – you change the function. – you unplug the AC power cord. Adjusting the VCD picture —Picture Effect You can adjust the hue and sharpness of the VCD picture. 1 Press PICTURE EFFECT on the remote during playback. 2 Press B or b repeatedly to adjust the hue. 3 Press V or v repeatedly to adjust the sharpness. 4 Press ENTER or PICTURE EFFECT on the remote. Tip The hue and sharpness can be adjusted in 11 steps (from –5 to +5). 18GB Tuner Presetting radio stations You can preset up to 20 FM stations and 10 AM stations. You can then tune in any of those stations simply by selecting the corresponding preset number. There are two ways to store the station presets. To Method Automatically tune in all of the stations that can be received in your area and then store them manually Automatic Tuning Preset Manually tune in and store the radio frequency of your favorite stations Manual Tuning Preset Setting presets through automatic tuning 1 Press TUNER/BAND repeatedly to select “FM” or “AM”. 2 Press and hold – or + (or TUNING – or + on the remote) until the frequency indication starts to change, then release it. Scanning stops automatically when the system tunes in a station. “TUNED” and “STEREO” (for an FM stereo program) appear. If “TUNED” does not appear and the scanning does not stop Set the frequency of the desired radio station as described in steps 2 through 6 of “Setting presets through manual tuning” on page 20. 3 Press TUNER MEMORY on the remote. A preset number appears in the display. The stations are stored from preset number 1. Preset number 4 Press . or > (or PRESET – or + on the remote) repeatedly to select the desired preset number. 5 Press ENTER on the remote. 6 Repeat steps 1 to 5 to store other stations. continued Tuner 19GB Presetting radio stations (continued) Other Operations To Do this Setting presets through manual tuning 1 P...