Log:
Évaluations - 3, GPA: 4.7 ( )

Instructions Advantek Networks, Modèle WIRELESS - N AWN-11N-RT

Fabricant : Advantek Networks
Taille : 88.97 kb
Nom Fichier : 2728758e-6737-48ec-80e6-48308a8f1f64.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


5.0 or later, or Netscape Navigator ver. 4.7 or later. 1.3 LEDs Indication & Connectors of Wireless Router Front Panel LEDs Indication LED Light Status Description PWR On Wireless Router is powered on. Off Wireless Router is powered off. Status On Wireless Router is hung. Blinking Wireless Router is up and ready. LAN (1, 2, 3, 4) On LAN port is successfully connected. Blinking Data is being sent or received. WAN On WAN port is successfully connected Blinking Data is being sent or received. WLAN LINK/ACT Slow Blinking WLAN is successfully connected. Blinking Data is being sent or received. 1 Back Panel Connectors Button/Port Description Reset Reset configurations to default. You would use the reset button only when a program error has caused your 11n AP router to hang. Press the button and hold for 10 seconds. WPS Click WPS button about 2-3 seconds while you are connecting a PC of wireless adapter with WPS function (you must enable WPS' PBC function). LAN (1x, 2x, 3x, 4x) Ethernet RJ-45 connector, connect to PC with a RJ-45 Ethernet cable. WAN Ethernet RJ-45 connector, connect to WAN access device, such as the Cable modem or ADSL modem. PWR Power connector, connect to the power adapter packaged with the AP router. 1.4 Installation Instruction 1) Power off 802.11n AP Router and DSL/Cable modem. 2) Connect computer to the LAN port on the Wireless Router with Ethernet cable. 3) Connect the DSL or Cable modem to the WAN port on the Wireless Router with Ethernet cable. 4) Power on DSL or Cable modem first, then connect power adapter to the power jack on the rear panel of Wireless Router and plug the power cable into an outlet. 5) Check LEDs. a) Once power on Wireless Router, Power LED should be on. b) LAN LED should be on for each active LAN connection. c) The WAN LED should be on when the DSL or cable modem is connected. Warning: Only use the power adapter is provided from this package, use other power adapter may cause hardware damage 2...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories