Évaluations - , GPA:
(
)
)
Fabricant : Crosley Radio
Taille : 632.49 kb
Nom Fichier : 7aff8212-d6dd-4c76-994d-431f1277bb75.pdf
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
-Increase the separation between the equipment and receiver. -Connect the equipment into an circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio TV technician for help. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER. PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance. CAUTION For Compact Disc Units Only: INVISBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPORSURE TO LASER BEAM. Specification Frequency Range : AM 525 - 1710 KHz : FM 87.5 - 108.5 MHz Power Consumption : 17 Watts Antennas : External FM antenna : Built-in ferrite AM bar Power Source : AC 120V ~ 60 Hz Speaker : 4” Dynamic type X 2 Speaker Wattage : 5 Watts Speaker ohms : 4 ohms Output ohms : 4 ohms Output Wattage : 2 Watts per channel * DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. Radio Operation Radio Operation 1 Press the FM BUTTON (5) or the AM BUTTON (6) to select the desired radio band. 2 Turn the TUNING KNOB (7) to set the desired station. 3 Adjust the volume to the desired level. 4 Adjust the VOLUME KNOB (3) to the desired sound level. Antenna Antenna: for FM reception, the unit is provided witha FM WIRE ANTENNA (10) , move the wire untilthe reception is clear and with no interferences. ForAM reception, the unit is provided with a directionalbuild-in ferrite antenna. Rotate the set to find the position in which the best reception is obtained. Donot connect the FM WIRE ANTENNA (10) to anyoutside antenna. Auxiliary Outputs 1 You can connect your radio to different sourcesusing the auxiliary outputs. 2 Connect the auxiliary cables to the LINE OUTJACK (8) to the auxiliary inputs on the desiredcomponent. See the owner’s manual for theoperating instructions for the desired component. The LINE OUT JACK (8) only puts out a signaland will not run external speakers without using a separate amplified source. Turntable Operation Turntable Operation Turn the unit on by turning the ON-OFF SWITCH / VOLUME CONTROL KNOB (3) clockwise to theON position. 1 Press the PHONO BUTTON (4) to selectPHONO mode. 2 Set the SPEED CONTROL SWITCH (13) todesire speed (33 1/3,45 or 78 rpm). Place therecord on the TURNTABLE (15). 3 Pull the TONE ARM (12) slightly to the rightside until hear the “click” sound to activate the turntable. 4 Move the TONE ARM (12) by hand to the recordand slowly lower it to the desired starting point. Turn the VOLUME CONTROL KNOB (3) toadjust the volume to the desired level. 5 At the end of the record, the TONE ARM (12) will stop automatically. You must return theTONE ARM (12) to TONE ARM REST (14) byhand. 6 Welcome Table of Contents Turntable Operation Thank you for purchasing the Crosley The AutoRamawith Radio (CR711). Before operating this unit, please read this manual thoroughly and retain it forfuture reference. About This Manual Instructions in this manual describe the control functions of the CR711. Accessory: ADAPTER FOR 45 RPM To play a 45 rpm record, place the ADAPTER (11) on the spindle and place the record over the adapter. Getting Started & Basic Operation Control Locators....................... 4 Unpacking................................ 5 Set Up...................................... 5 Power Up Your Crosley............ 5 Turntable Operation Setting Turntable Speed.......... 6 Playing A Record..................... 6 Radio Operation Radio Operation....................... 7 Antenna.................................... 7 General Auxiliary Outputs..................... 7 Troubleshooting Guide.......... 8 Warranty.............................. 9 4 5 Getting Started & Basic Operation Unpacking Set Up 1 Remove packing materials from unit. Note: Save all packing materials. 2 Remove plastic bag covering radio. 3 Remove plastic safety cover from A/C plug. 4 Remove tie from A/C POWER CORD (9) and untie FM WIRE ANTENNA (10) on back of radio. 5 Open lid and remove styrofoam shipping material from turntable. 6 Remove black tie-wrap from under the TONE ARM (12). 7 Remove white protective needle cover by gently pulling towards the front of the unit. 1 Plug A/C POWER CORD (9) into appropriate outlet. Note: This product may be equipped with a polaized alternating-c...