Fabricant : Sony Taille : 1.48 mb Nom Fichier : Langue d'enseignement:

Aller à la télécharger

5 Select “SONY:CMT-SBT100” or “SONY:CMT-
2 Touch your smartphone to the unit.
4 Start playback of the connected component.
7 Press / (power)  to turn off the system.
CD-DA/MP3 disc
The USB device cannot be charged.
Supported BLUETOOTH version and
Tuner section
SBT100B” in the display of the BLUETOOTH
Precautions
Touch the smartphone to the N-Mark  on the
Adjust the volume on the connected
Changing the display
ˎ When the Play Timer is set, the system
ˎ Make sure the USB device is connected securely.
profiles
AM tuner section (CMT-SBT100 only):
device.
unit and maintain contact until the smartphone
component during playback.
“LOCKED” appears in the display  and
automatically turns on about 15 seconds (for
ˎ Charging cannot be made when the power of
Profile refers to a standard set of capabilities for
Tuning range:
If prompted to enter a passkey on the
vibrates.
FM, AM or DAB*) or about 90 seconds (for a
the disc cannot be removed from the disc
various BLUETOOTH product capabilities. See
European models:
5
To
Do the following:
the system is off.
Discs that this system CAN play
BLUETOOTH device, enter “0000.”
Press VOLUME +/  on the remote or turn
CD-DA disc or USB device) before the preset
tray.
“Specifications” for details on the supported
531 kHz – 1,602 kHz (with 9 kHz tuning
the VOLUME dial  on the unit left or right to
ˎ The USB device may not be supported by this
ˎ
View
Audio CD-DA discs
6
Press DISPLAY  repeatedly
BLUETOOTH version and profiles.
interval)
Operate the BLUETOOTH device and perform
time.
adjust the volume.

ˎConsult your nearest Sony dealer or local
system. Check the information on the websites
information on
ˎ CD-R/CD-RW (audio data of CD-DA tracks and
when the system is on.
Other models:
BLUETOOTH connection.
ˎ The Play Timer does not work if the system
authorized Sony service facility.
about compatible USB devices.
MP3 files)
Note
the display  *1
Notes
is on at the preset time. Be careful not to
530 kHz – 1,710 kHz (with 10 kHz tuning
When pairing is completed and connection
The system may enter Standby mode automatically if the
The disc or file will not play.

ˎTo use a BLUETOOTH device connected to this system,
Display clock
Press DISPLAY  repeatedly
operate the system until it is turned on and
Do not use a CD-R/CD-RW disc with no data
the device must support the same profile as this system.
interval)
with the BLUETOOTH device is established
volume level of the connected component is too low. Adjust
Tuner

ˎThe disc that has not been finalized (a CD-R or
when the system is off. *2 The
starts play with the timer.
stored. Doing so may damage the disc.
Note that the functions of the BLUETOOTH device may be
531 kHz – 1,710 kHz (with 9 kHz tuning
correctly, the display  changes to
the component’s volume accordingly.
CD-RW disc to which data can be added).
clock appears for about 8
* AM is available for CMT-SBT100 only, or DAB is for CMT-
Severe hum or noise occurs (“STEREO”
different depending on the specifications of the device,
interval)
“BLUETOOTH” from “PAIRING” and the
even if it has the same profile as this system.
seconds.
SBT100B only.
flashes in the display window ), or
Discs that this system CANNOT play
Antenna: AM loop antenna
BLUETOOTH indicator  flashes slowly in blue.
The sound skips, or the disc will not play.

ˎBecause of the properties of BLUETOOTH wireless
broadcasts cannot be received.
ˎ CD-ROM
technology, playback on this system is slightly delayed
Intermediate frequency: 400 kHz

ˎDepending on the type of BLUETOOTH device,
Setting the Automatic Standby
To check the setting
*1

ˎWipe the disc clean, and replace it.
You can view the information described below during
ˎ
ˎ CD-R/CD-RW other than those recorded in
compared with audio playback on the transmitting device.
FM tuner section:
connection may start automatically after
function
playback of a CD-DA/MP3 disc.

ˎMove the system to a location away from
1
Connect the antenna properly.
Press TIMER MENU .
music CD format or MP3 format conforming to
FM stereo, FM superheterodyne tuner
pairing is completed.
Complete the connection with your
*2 The information does not appear in BLUETOOTH mode.
vibration (for example, on top of a stable stand).
ˎ Find a location and an orientation that provide
ISO9660 Level 1/Level 2, Joliet
Effective communication range
Antenna: FM lead antenna
smartphone, following the instructions on the
2 Press /  repeatedly to select “TIMER SEL,”

ˎOscillation of the speakers may be the cause of
good reception, and then set up the antenna
BLUETOOTH devices should be used within
Notes
With the Automatic Standby function, the
CD-DA disc
and then press .
again.
ˎ CD-R/CD-RW recorded in multi-session format
Tuning range: 87.5 MHz – 108.0 MHz (50 kHz
ˎ
sound skips, depending on the volume level.
“Passkey” may be called “Passcode,” “PIN code,” “PIN
screen.
system enters Standby mode automatically in
approximately 10 meters (unobstructed distance)
 remaining playing time of a track during
ˎ Keep the antennas away from the unit, speaker
and not closed the session
step)
number” or “Password,” etc., depending on the device.
Refer to the user’s guide of your smartphone
about 15 minutes when there is no operation or
Move the speakers away from the unit or change
3 Press /  repeatedly to select “PLAY SEL,”
ˎ CD-R/CD-RW of poor recording quality,
of each other. The effective communication
ˎ The pairing standby status of the system is cancelled after
DAB/DAB+ tuner section (CMT-SBT100B only):
for the part of your smartphone used as touch
audio signal output. “AUTO STBY” appears in the
playback
and then press .
the location of the speakers.
cord or other AV components to avoid picking
range may become shorter under the following
about 5 minutes. If pairing is not successful, perform the
CD-R/CD-RW that have scratches or are dirty,
FM stereo, DAB/FM superheterodyne tuner
display  for 2 minutes before the system enters
 total remaining playing time
up noise.
conditions.
procedure from step 1.
contact.
The timer setting appears in the display.
Play does not start from the first track or
ˎ Turn off nearby electrical equipment.
or CD-R/CD-RW recorded with an incompatible
Frequency range*
ˎ If you want to pair with several BLUETOOTH devices,

ˎTo disconnect the established connection, touch
Standby mode. By default, the Automatic Standby
MP3 disc
file.
recording device
 When a person, metal object, wall or other
Band-III: 174.928 (5A) MHz – 239.200 (13F) MHz
perform the procedure from step 1 to 6 individually for each
function is turned on. You can turn off the function
 track or file name
To cancel the timer
Several radio stations can be heard at the
ˎ CD-R/CD-RW which is finalized incorrectly
obstruction is between the devices with a
BLUETOOTH device.
your smartphone to the N-Mark  on the unit.

ˎReturn to normal play by pressing PLAY MODE
* For details, see “DAB/DAB+ frequency table”
using the option menu.
Repeat the same procedure as “To check the
BLUETOOTH connection

ˎWhen you touch an NFC-compliant smartphone
 artist name
 repeatedly in stop mode until both “PGM”
same time.

ˎDiscs containing files other than MPEG 1 Audio
below.
Tip
setting” until “OFF” appears in step 3, and then
to the unit while another BLUETOOTH device
1 Press OPTIONS  to display the setting menu.
 album name
and “SHUF” in the display  disappear.
ˎ
 Locations where a wireless LAN is installed
Find a location and an orientation that provide
Layer-3 (MP3) files
Antenna: DAB/FM lead antenna
You can perform a pairing operation or attempt to make a
press .
 Around microwave ovens that are in use
BLUETOOTH connection with another BLUETOOTH device
is connected with this system, the BLUETOOTH
2 Press /  repeatedly to select “AUTO STBY,”
good reception, and then set up the antenna

ˎDiscs of non-standard shape (for example, heart,
The DAB/DAB+ services are available only in
Notes on the display information
Starting playback takes more time than
while the BLUETOOTH connection is established with one
device is disconnected and the system is
 Locations where other electromagnetic waves
then press .
To change the setting
again.
square, star)
countries/regions that support DAB/DAB+
BLUETOOTH device. The currently established BLUETOOTH
connected with the smartphone.
ˎ Characters that cannot be displayed appear as “_”.
usual.
Start over from step 1.
ˎ Bundle the antenna cables using commercially

ˎDiscs that have adhesive tape, paper, or sticker
occur
services.
connection is cancelled when BLUETOOTH connection with
ˎ The following are not displayed:

ˎIf you touch the smartphone connected
3 Press /  repeatedly to select “ON” or

ˎThe following discs can increase the time it takes
another device is successfully established.
 remaining playing time or total playing time for an MP3
available cord clips, for example, and adjust the
attached to them
with this system to another NFC-compliant
“OFF,” then press .
Notes
to start playback:
Effects of other devices
disc
cable lengths.
DAB/DAB+ frequency table (Band-III)
ˎ When the sound source for a Play Timer is set to a radio


ˎRental or used discs with attached seals where

a disc recorded with a complicated tree
BLUETOOTH devices and wireless LAN (IEEE
To erase the pairing registration
BLUETOOTH headset or speaker, the smartphone
Notes
 remaining playing time for an MP3 file
station that you set using Automatic Scanning (AUTO)
the glue extends beyond the seal
is disconnected from the system and connected
ˎ The Automatic Standby function is invalid for the tuner
ˎ
Frequency
Label
Frequency
Label
The following are not displayed correctly:
structure.
DAB/DAB+ radio station is not received
802.11b/g) use the same frequency band (2.4
information
or Manual Tuning (MANUAL) and you change the radio

ˎDiscs that have labels printed using ink that feels
with the touched BLUETOOTH device.
function (FM/AM/DAB*), even when you have enabled it.
 elapsed playing time of an MP3 file encoded using VBR
GHz). When using your BLUETOOTH device
frequency or band after setting the timer, the radio station
 a disc recorded in multi-session format.
properly.
174.928 MHz
5A
209.936 MHz
10A

ˎThe system may not enter Standby mode automatically in
(Variable Bit Rate).
tacky when touched
near a device with wireless LAN capability,
1
setting for the timer will also be changed.
Press BLUETOOTH FUNCTION  on the remote
 a disc that has many folders.
ˎ
the following cases:
Check all antenna connections, then perform the
176.640 MHz
5B
211.648 MHz
10B
 folder and file names that do not follow either the
ˎ When the sound source for a Play Timer is set to a radio
electromagnetic interference may occur. This
or press FUNCTION  on the unit repeatedly
Listening to music through a

Notes on CD-DA discs

while an audio signal is being detected
ISO9660 Level 1/Level 2 or Joliet in the expansion format.
DAB Automatic Scan procedure (see “Running
station tuned from a preset radio station (preset number 1
could result in lower data transfer rates, noise,
178.352 MHz
5C
213.360 MHz
10C
until “BLUETOOTH” appears in the display .
BLUETOOTH connection
 during playback of audio tracks or files
ˎ The following are displayed:
to 20), and if you change the frequency of the radio station
USB device
the DAB Automatic Scan manually (CMT-
ˎ Before playing, wipe the disc with a cleaning
SBT100B only)”).
cloth from the center out to the edge.
or inability to connect. If this happens, try the
180.064 MHz
5D
215.072 MHz
10D
When the system is connected with a
You can operate a BLUETOOTH device by
 while the preset Sleep Timer or Play Timer is in process
 total playing time for a CD-DA disc (except when PGM
or band after setting the timer, the radio station setting for
ˎ The system counts down the time (15 minutes) again until
mode is selected and the player is stopped)
the timer will not change. The radio station tuning for the
An unsupported USB device is connected.
ˎ The current DAB/DAB+ service may not be
following remedies:
181.936 MHz
6A
216.928 MHz
11A
BLUETOOTH device, the device name set for the
connecting the system and a BLUETOOTH device
ˎ Do not clean discs with solvents, such as
it enters Standby mode, even when Automatic Standby
 remaining playing time for a track of CD-DA disc
timer is fixed at what you set for it.
available. Press TUNE +/  to select a different
benzine, thinner, or commercially available
 Try connecting this system and BLUETOOTH
183.648 MHz
6B
218.640 MHz
11B
connected BLUETOOTH device appears in the
using AVRCP.

ˎIf you connect an unsupported USB device,
function is enabled when a USB device is connected or
 remaining playing time for a CD-DA disc (only when
service.
cleaners or anti-static spray intended for vinyl
mobile phone or BLUETOOTH device when you
display  of the system. Press BLUETOOTH 
Check the following before playing music:
when a button on the remote or unit is pressed.
Tip
the following problems may occur. Check the
Normal Play mode is selected during playback)
185.360 MHz
6C
220.352 MHz
11C
The Play Timer setting remains as long as the setting is not
ˎ If you have moved to another area, some
LPs.
are at least 10 meters away from the wireless
on the unit to cancel the connection with that
information on the websites about compatible

ˎThe BLUETOOTH function of the BLUETOOTH
* AM is available for CMT-SBT100 only, or DAB is for CMT-
 ID3 tag information for MP3 files. ID3 version 2 tag
LAN equipment.
187.072 MHz
6D
222.064 MHz
11D
information display has priority when both ID3 version 1
cancelled manually.
USB devices with URLs listed under “Playing a
services/frequencies may have changed
ˎ
BLUETOOTH device then display “BLUETOOTH.”
Do not expose discs to direct sunlight or heat
device is enabled.
SBT100B only.
and version 2 tags are used for a single MP3 file.
file on a USB device.”
and you may not be able to tune into your
sources such as hot air ducts, nor leave it in a car
 Turn off the power to the wireless LAN
188.928 MHz
7A
223.936 MHz
12A
2 Press OPTIONS  to display the setting menu.

ˎPairing has been completed.
 up to 64 characters for an ID3 tag, where characters
 The USB device is not recognized.
usual broadcast. Perform the DAB Automatic
parked in direct sunlight.
equipment when using your BLUETOOTH
190.640 MHz
7B
225.648 MHz
12B
allowed are uppercase letters (A to Z), numbers (0 to 9),
device within 10 meters.
3
Scan procedure to re-register the contents of
Press /  repeatedly to select “DEL LINK,”
1 Press BLUETOOTH FUNCTION  on the remote
Setting the BLUETOOTH Standby
 File or folder names are not displayed on this
and symbols (˝ $ % ’ ( ) * + , – . / < = > @ [ \ ] _ ` { | } ! ? ^ ~)
Troubleshooting
On safety
192.352 MHz
7C
227.360 MHz
12C
then press .
or press FUNCTION  on the unit repeatedly
system.
broadcasts. (Performing this procedure clears all
Effects on other devices
until “BLUETOOTH” appears in the display .
previously stored presets.)
ˎ Completely disconnect the power cord (mains
194.064 MHz
7D
229.072 MHz
12D
4
mode
Notes on the DAB/DAB+ display
 Playback is not possible.
Press /  repeatedly to select “OK,” then
1 Make sure the power cord is firmly connected.
lead) from the wall outlet (mains) if it is not
The radio waves broadcast by this system may
195.936 MHz
8A
230.784 MHz
13A
press .
2 Establish BLUETOOTH connection with the
information (CMT-SBT100B only)
 The sound skips.
The DAB/DAB+ broadcast of has been
going to be used for an extended period of time.
interfere with the operation of some medical
BLUETOOTH device.
You can enable/disable BLUETOOTH Standby
The following is also displayed;
2 Find your problem in the checklist below, and
 There is noise.
devices. Since this interference may result in
197.648 MHz
8B
232.496 MHz
13B
“COMPLETE” appears and all the pairing
mode.
interrupted.
When unplugging the system, always grip the
 up to 8 characters of service name, up to 128 characters of
take the indicated corrective action.
malfunction, always turn off the power on
199.360 MHz
8C
234.208 MHz 13C
information is erased.
Once the connection is established, “CONNECT”
When BLUETOOTH Standby mode is enabled,
 A distorted sound is output.
plug. Never pull the cord itself.
DLS (Dynamic Label Segment) and up to 16 characters of
ˎ Check the location of the system or adjust
appears in the display  then the BLUETOOTH
If the issue persists, contact your nearest Sony
this system, BLUETOOTH mobile phone and
201.072 MHz
8D
235.776 MHz
13D
the system enters Wait mode for BLUETOOTH
ensemble label.
the orientation of the antenna to increase the
ˎ Should any solid object or liquid get into the
Note
device name set with the BLUETOOTH device
There is no sound.
 a value between 0 and 100 indicating the signal quality is
dealer.
indicated value of the signal quality. Refer to
system, unplug the system, and have it checked
BLUETOOTH device in the following locations:
202.928 MHz
9A
237.488 MHz
13E
If you have erased the pairing information, you cannot make
connection even when the system is turned off.
appears.
displayed.

ˎThe USB device is not connected correctly. Turn
“Changing the display” for further details on the
by qualified personnel before operating it again.
 In hospitals, on trains,and in airplanes
a BLUETOOTH connection unless pairing is performed again.
If the system receives a playback command from
off the system, and then reconnect the USB
204.640 MHz 9B
239.200 MHz
13F
To connect with a BLUETOOTH device again, you must enter
If the BLUETOOTH device has been connected
the connected BLUETOOTH device, it turns on and
If the STANDBY indicator  flashes
signal quality.
ˎ The AC power cord can be changed only by a
 Near automatic doors or fire alarms
device.
206.352 MHz
9C
the passkey on the BLUETOOTH device.
with this system in the past, it may be
music is played back. The BLUETOOTH Standby
Immediately unplug the power cord, and check
qualified service facility.
connected automatically with no user operation
Notes
208.064 MHz 9D
the following item.
There is noise, skipping, or distorted
To reset the system to factory settings
Connecting by one-touch action (NFC)
mode is disabled by default.
Using the timers

ˎThis system supports security functions that comply with
required.
On placement
1
sound.
ˎ Is the speaker cord shorted out?
If the system still does not operate properly, reset
the BLUETOOTH specification as a means of ensuring
* Frequencies are displayed to two decimal places
NFC enables data communication by just touching
3
Press OPTIONS  to display the setting menu.
ˎ Do not place the system in an inclined position
Press   to start playback.
The system offers Sleep Timer and Play Timer. The
security during communication using BLUETOOTH
After the STANDBY indicator  stops flashing,

ˎAn unsupported USB device is connected.
the system to factory settings.
on this system.
your device to a specified location.
or in locations that are extremely hot, cold, dusty,
technology. However, this security may be insufficient
Depending on the BLUETOOTH device, you may
2 Press /  repeatedly to select “BT STBY,”
Sleep Timer has priority over the Play Timer.
Connect a supported USB device.
reconnect the power cord, and turn on the
Use buttons on the unit to reset the system to its
dirty, or humid or lacking adequate ventilation,
depending on the setting contents and other factors, so
BLUETOOTH section
Compatible smartphones are those equipped with
have to press   twice.
then press .
system. If the issue persists, contact your

ˎTurn off the system, then reconnect the USB
factory default settings.
or subject to vibration, direct sunlight or a bright
always be careful when performing communication using
Communication system:
the NFC function (compatible operating system:
Depending on the BLUETOOTH device, you
3 Press /  repeatedly to select “ON” or
Setting the Sleep Timer
nearest Sony dealer.
device and turn on the system.
1 Disconnect the power cord and confirm that
light.
BLUETOOTH technology.
BLUETOOTH Standard version 3.0
Android version 2.3.3 or later with the exception of

ˎSony cannot be held liable in any way for damages or other
may have to start up the AV software of the
“OFF,” then press .
The system is turned off automatically after the

ˎThe music data itself contains noise, or the
the STANDBY indicator  is not lit. Then
ˎ Be careful when placing the system on surfaces
Output:
Android 3.x).
loss resulting from information leaks during communication
BLUETOOTH device beforehand.
time set for the Sleep Timer is elapsed.
sound is distorted. Noise may have been
reconnect the power cord and turn on the
that have been specially treated (for example,
using BLUETOOTH technology.
BLUETOOTH Standard Power Class 2
Check the website below for information on
4 Press / (power)  to turn off the system.
The Sleep Timer works even if the clock is not set.
General
entered when creating music data due to the
system.
with wax, oil, polish) as staining or discoloration

ˎBLUETOOTH communication is not necessarily guaranteed
Maximum communication range:
compatible devices.
4 Press VOLUME +/  on the remote or turn
When “BT STBY” is set to “ON,” the system turns
conditions of the computer. In this case, delete
of the surface may result.
with all BLUETOOTH devices that have the same profile as
Line of sight approx. 10 m*1
For customers in Europe and Russia:
the VOLUME dial  on the unit left or right to
on and you can listen to music by activating
1 Press SLEEP  repeatedly to specify the time.
The system does not turn on.
the file and send the music data again.
2 Press and hold   and /  on the unit
ˎ
this system.
If the system is brought directly from a cold to a
Frequency band:
http://support.sony-europe.com/
adjust the volume.
BLUETOOTH on the connected component.

ˎSelect “30MIN” to turn off the system after 30
until “RESET” appears in the display.
ˎ Is the power cord plugged in correctly?

ˎThe bit rate used when encoding the files was

ˎBLUETOOTH devices connected with this system must
warm location or is placed in a very damp room,
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
For customers in Latin America:
minutes.
All user-configured settings, such as preset
comply with the BLUETOOTH specification prescribed
Other operations
Note
low. Send files encoded with higher bit rates to
moisture may condense on the lens inside the
by the BLUETOOTH SIG, Inc., and must be certified to
Modulation method:
http://www.sony-latin.com/index.crp
ˎ
radio stations, timer, and the clock, are deleted.
“BT STBY” does not appear in the setting menu, if the
To cancel the Sleep Timer, select “OFF.”
The system has entered Standby mode
the USB device.
CD player, and cause the system to malfunction.
comply. However, even when a device complies with the
FHSS
For customers in other countries/regions:
To
Do the following:
BLUETOOTH device is not registered on this system.
unexpectedly.
If the problem persists after doing all of the
In this situation, remove the disc, and leave the
BLUETOOTH specification, there may be cases where the
Compatible BLUETOOTH profiles*2:
http://www.sony-asia.com/support
Pause playback
characteristics or specifications of the BLUETOOTH device
Press  *.
“READING” is displayed for an extended
Setting the Play Timer
ˎ This is not a malfunction. The system enters
above, consult your nearest Sony dealer.
system turned on for about an hour until the
A2DP (Advanced Audio Distribution Profile)
Standby mode automatically in about 15 minutes
time, or it takes a long time before
make it impossible to connect, or may result in different
moisture evaporates.
Preparation on your smartphone (Android)
Stop playback
Press  .
You can listen to a CD-DA or MP3 disc or radio
control methods, display or operation.
AVRCP (Audio Video Remote Control Profile)
when there is no operation or audio signal
playback starts.
every day at a preset time.

ˎNoise may occur or the audio may cut off depending on
An NFC-compliant application must be installed
Supported content protection method:
Select a folder
Press
+/ .
Setting the wireless signal ON/
output. See “Setting the Automatic Standby

ˎThe reading process may take a long time in the
Make sure you have set the clock before setting
On heat buildup
the BLUETOOTH device connected with this system, the
on your smartphone. If not installed, you can
SCMS-T method
OFF
function.”
following cases.
Messages
the timer.
ˎ Heat buildup on the unit during operation is
communications environment, or surrounding conditions.
download “NFC Easy Connect” from Google Play.
Select a file
Press / .
Transmission bandwidth:
 There are many folders or files on the USB
normal and is not cause for alarm.
ˎ
20 Hz – 20,000 Hz (with 44.1 kHz sampling)
In some countries and regions, NFC-compliant
Find a point in
Hold down /  (or
When the unit is turned on, you can control a
1 Prepare the sound source, and turn the
The clock setting or the Play Timer
device.
ˎ Do not touch the cabinet if it has been used
application may not be downloaded.
a file
CANNOT PLAY: The system cannot play audio

*1
/  on the unit)
BLUETOOTH signal.
VOLUME dial  on the unit left or right or
operation has been cancelled

The actual range will vary depending on

The file structure is extremely complex.
files due to an unsupported file format or
continuously at a high volume because the
ˎ For some smartphones, this function may
during playback and release
The default setting is ON.
press VOLUME +/  on the remote to adjust
unexpectedly.
Specifications
factors such as obstacles between devices,
 Not enough free space in the memory.
playback restriction.
cabinet may have become hot.
be available without downloading “NFC Easy
the volume.
the button at the desired point.
magnetic fields around a microwave oven,
1 Turn on the unit.
ˎ If about a minute elapses with no operation, the
 The internal memory is fragmented.
ˎ Do not obstruct the ventilation holes.
Connect.” In this case, the operation and
The available sound sources are: CD, USB, and
clock setting or Play Timer setting is cancelled
CAN’T PLAY: You have set a disc that cannot be
static electricity, reception sensitivity, antenna’s
specifications of the smartphone may be
played back on this system, such as CD-ROM
Amplifier section
* Depending on the BLUETOOTH device, you may have to
2 If flashes in the display window, press and
TUNER (FM, AM or DAB)* FUNCTION.
automatically. Perform the operation again from
The file or folder name (album name) is
On the speaker system
performance, operating system, software
different from the description in this manual.
press   twice.
hold BASS BOOST  and BLUETOOTH  of
and DVD disc.
To start from a specific CD track, audio file or
the beginning.
Power output (rated): 20 watts + 20 watts (at
not displayed correctly.
This speaker system is not magnetically shielded,
application, etc.
COMPLETE: The station preset operation ended
6 ohms, 1 kHz, 1% THD)
1
*2 BLUETOOTH standard profiles indicate the
Install the application.
Note
the unit.
radio station, create your own program.

ˎSend the music data to the USB device again,
and the picture on nearby TV sets may become
normally.
RMS power output (reference): 25 watts + 25 watts
These operations may not be available for certain
3
There is no sound.
After “RF OFF” (wireless signal is off) or “RF
magnetically distorted. In this situation, turn off
purpose of BLUETOOTH communication
If you access using 2D Code
* FM or AM for CMT-SBT100, or FM or DAB for CMT-
as the data stored in the USB device may have
BLUETOOTH devices. In addition, the actual operations may
DATA ERROR: You tried to play an unplayable file.
(per channel at 6 ohms, 1 kHz)
ON” (wireless signal is on) appears, release the
ˎ
SBT100B.
Make sure the speaker cords are connected
between devices.
been corrupted.
the TV, wait 15 to 30 minutes, and turn it back on.
Read the following 2D Code to access.
differ depending on the connected BLUETOOTH device.
button.
correctly.
ERROR: You operated the system during
2
Inputs/Outputs
Press TIMER MENU .

ˎThe character code that can be displayed by this
Speaker section
initialization. Wait for a while until the
Cleaning the cabinet
To check the address of a connected
ˎ Check the supplied speakers are used.
AUDIO IN (external input) jack:
2-way speaker system, Bass Reflex
Tips
system are as follows:
initialization is completed.
Clean this system with a soft cloth slightly
BLUETOOTH device
3 Press /  repeatedly to select “PLAY SET,”
ˎ Turn the VOLUME dial  on the unit clockwise
Stereo mini jack, sensitivity 700 mV, impedance
ˎ
Woofer: 100 mm, cone type
When this setting is set to OFF, the BLUETOOTH function is
 Upper cases (A to Z).
then press .
LOCKED: The disc tray  is locked and you
moistened with a mild detergent solution. Do not
Press DISPLAY  while the BLUETOOTH device
or press VOLUME +  on the remote to turn up
47 kilohms
not available.
 Numbers (0 to 9).
Tweeter: 40 mm, cone type
the volume.
cannot remove the disc. Contact your nearest
use any type of abrasive pads, scouring powder,
name set on the connected BLUETOOTH device is
ˎ When this setting is OFF, the unit can be turned on using
The start time flashes in the display.
 (headphone) jack:

Dimensions (W/H/D):

Symbols (< > * +, [ ] @ \ _).
Sony dealer.
or solvents, such as thinner, benzine, or alcohol.
shown in the display . The BLUETOOTH device
the one-touch action (NFC) from a smartphone/tablet.
4
ˎ Make sure the headphones are disconnected
Stereo mini jack, 8 ohms or more
Set the time to start operation.
Approx. 150 mm × 240 mm × 220 mm
Other characters appear as “_.”
NO DEVICE: No USB device is connected or the
address appears in two installments on the
ˎ When this setting is OFF, the BLUETOOTH Standby mode
from the headphone jack.
USB:
Mass: Approx. 2.0 kg (per unit)
cannot be set.
Press /  repeatedly to set the hour, then
connected USB device has been removed.
system display for 8 seconds.
ˎ Make sure an external component is connected
The USB device is not recognized.
Supported bit rate: MP3 (MPEG 1 Audio Layer-3):
General
2
ˎ When the BLUETOOTH Standby mode is ON, the
Set your smartphone to enable the NFC
press .
NO DISC: There is no disc in the player, or you
32 kbps – 320 kbps, VBR
BLUETOOTH Standby mode turns OFF when this setting is
correctly to the AUDIO IN jack  and set the

ˎTurn off the system and reconnect the USB
BLUETOOTH wireless
Power requirements:
function.
To cancel the connection with a
turned OFF.
The minute indication flashes. Use the
function to AUDIO IN.
have loaded a disc that cannot be played.
WMA: 48 kbps - 192 kbps, VBR
device, then turn on the system.
Latin American model:
For details, refer to the user’s guide supplied
BLUETOOTH device
ˎ When this setting is OFF, the unit and BLUETOOTH device
procedure above to set the minutes.
ˎ The specified station may have temporarily
NO MEMORY: The memory media is not inserted
technology
AAC: 48 kbps - 320 kbps
cannot be paired.

ˎCheck the information on the websites about
in the USB device, or the system does not
AC 120 V - 240 V, 50 Hz/60 Hz
with your smartphone.
Press BLUETOOTH  on the unit. “DISCONNECT”
When the start time is set, the system goes to
stopped broadcast.
Sampling frequencies: MP3 (MPEG 1 Audio
compatible USB devices with URLs listed under
Other models:
appears in the display .
ˎ The setting is saved even if you turn off the system.
the stop time setting.
ˎ The balance of left and right sound is false.
identify the memory media.
Layer-3): 32/44.1/48 kHz
AC 220 V - 240 V, 50 Hz/60 Hz
About the “NFC Easy Connect” application
“Playing a file on a USB device.”
Depending on the BLUETOOTH device, the
5
BLUETOOTH wireless technology is a short-range
Use the same procedure as in step 4 to set the
Check the left and right speakers are connected
NO STEP: All of the programmed tracks have
WMA: 44.1 kHz
Power consumption: 35 watts
This is a free application especially used for
connection may be cancelled automatically when

ˎThe USB device does not work properly. Refer
time to stop the operation.
correctly.
been erased.
wireless technology linking digital devices, such
AAC: 44.1 kHz
to the operating manual supplied with the USB
Dimensions (W/H/D):
Android. Search the internet for detailed
you stop playback.
Adjusting the sound
ˎ Put the speakers symmetrically.
NO SUPPORT: The system does not support the
as personal computers and digital still cameras.
USB port: Type A, 5 V DC 2.1 A
device for how to deal with this problem.
Approx. 290 mm × 106 mm × 221 mm (incl.
information on “NFC Easy Connect” and download
If “TIME NG” flashes in the display
ˎ Connect the supplied speakers.
connected USB device.
Using the BLUETOOTH wireless technology, you
CD-DA/MP3 player section
projecting parts)
the application.
The start time and the stop time are set to the
Play does not start.
NO TRACK: There are not playable files on the
can operate the units involved within a range of
System: Compact disc and digital audio system
Mass: Approx. 2.7 kg
ˎ
Setting the bass boost
In some countries and regions, NFC-compliant
Using optional audio
same time. Change the stop time.
Severe hum or noise occurs.
about 10 meters.

ˎTurn off the system and reconnect the USB
USB device or disc.
Laser Diode Properties
application may not be downloaded.
Press BASS BOOST  repeatedly to select “ON”
ˎ Move the system away from sources of noise.
NOT IN USE: You pressed an unplayable button.
The BLUETOOTH wireless technology is commonly
Supplied accessories: Remote (RM-AMU171) (1),
components
or “OFF.”
6 Select the sound source.
device, then turn on the system.
Emission Duration: Continuous
ˎ Connect the system to a different wall outlet.
OVER CURRENT: Remove the USB device from
used between two devices, but a single device
Laser Output*: Less than 44.6 µW
R6 (Size AA) batteries (2), Speaker cords (2),
Making a connection with your
Press /  repeatedly until the desired sound

ˎCheck the information on the websites about
ˎ Use of an AC power tap with a noise filter (not
the port and turn off the system then turn on the
can be connected to multiple devices.
* This output is the value measurement at a
Speaker pads (8), FM lead/AM loop antenna (1)
smartphone by one-touch action
Adjusting the bass and treble
source appears, then press .
compatible USB devices with URLs listed under
1 Press VOLUME   on the remote or turn the
supplied) is recommended.
You do not need wires to get connected as you
(CMT-SBT100 only), DAB/FM lead antenna (1)
“Playing a file on a USB device.”
system.
distance of 200mm from the objective lens
Just touch your smartphone to the system. The
Press BASS +/  to adjust bass or TREBLE +/
VOLUME dial  on the unit left to turn down
For the available sound sources, see step 1.
do with a USB connection, and you do not need
(CMT-SBT100B only), Operating Instructions (this

PUSH STOP: You pressed PLAY MODE  during
surface on the Optical Pick-up Block with 7mm
system is turned on automatically, and pairing and
to adjust treble.
the volume.
After the sound source selection is finished, the
The remote does not function.
Play does not start from the first track.
playback in the CD or USB function.
to place the devices face to face as you do with
aperture.
manual) (1)
BLUETOOTH connection are established.
Or, press EQ  on the unit repeatedly to select
2
confirmation display for the Play Timer appears.
wireless infrared technology. You can use the
Connect additional audio component to the
“BASS” or “TREBLE,” and adjust the selected item
ˎ Remove any obstacles between the remote and

ˎSet the play mode to Normal Play mode.
READING: The system is reading the information
Frequency response: 50 Hz – 20 kHz
Design and specifications are subject to change
1 Start the “NFC Easy Connect” application on
technology with one BLUETOOTH device in your
AUDIO IN jack  using an audio connecting
using TUNE +/ .
the remote sensor  on the unit, and position
on the disc or USB device. Some buttons do not
Signal-to-noise ratio: More than 90 dB
without notice.
your smartphone.
cable (not supplied).
the unit away from fluorescent lights.
work during reading.
bag or pocket.
Dynamic range: More than 90 dB
Tip
BLUETOOTH wireless technology is a global
Standby power consumption: less than 0.5 W (all wireless
Check that the application display appears.
ˎ
3
Point the remote at the remote sensor on the
STEP FULL: You tried to program more than 25
Press AUDIO IN FUNCTION  on the remote
This system is equipped with the DSEE function to reproduce
unit.
standard supported by thousands of companies.
network ports off)
or press FUNCTION  on the unit repeatedly
clear treble despite degradation caused by compression.
tracks or files.
These companies produce products that meet the
BLUETOOTH Standby mode: less than 2 W (all wireless
until “AUDIO IN” appears in the display .
The DSEE function is usually activated automatically by
ˎ Move the remote closer to the system.
TIME NG: The Play Timer start and end times are
network ports on)
recognizing the sound source, but it may not be activated
set to the same time.
global standard.
depending on the function in use.
CMT-SBT100/SBT100B (GB) 4-464-274-14 (1)

---

...

Ce manuel est également adapté pour les modèles :
Stéréo - CMT-SBT100B (1.48 mb)

Téléchargez votre

Pour télécharger, entrez 2 chiffres :