Log:
Évaluations - , GPA: ( )

Instructions Electro-Voice, Modèle M2

Fabricant : Electro-Voice
Taille : 530.31 kb
Nom Fichier : M2-eds.pdf

Langue d'enseignement: en

Le document est chargé, s'il vous plaît patienter
Le document est chargé, s'il vous plaît patienter

Facilité d'utilisation


The input channels shall have a 3-pin XLR- type connector with universal phantom power and a balanced .-inch high-impedance line input. These channels will have a three-band EQ with +15 dB of boost/cut with a semi-parametric mid sweepable from 250 – 5,000 Hz. These channels shall have pre- fade listen (PFL), a mute switch and a 60mm fader. All input channels will have four aux sends. Auxs 1 and 2 are fixed pre-fader and auxs 3 and 4 are fixed post-fader. The master section shall have four aux master sends, each with an LED overload indicator and after-fade listen (AFL). There shall be two stereo, mono-compatible aux returns with level and balance controls. There shall be two 10-segment LED meters that can monitor either the master outputs or the mono/PFL signals. There shall be separate record output and tape playback controls and a headphone amplifier with a gain control. The master outputs and the mono output shall be controlled with 60-mm faders and have mute switches. The mixer shall be the Electro-Voice M2/12 and M2/16. Uniform Limited Warranty Electro-Voice products are guaranteed against malfunction due to defects in materials or workmanship for a specified period, as noted in the individual product-line statement(s) below, or in the individual product data sheet or owner’s manual, beginning with the date of original purchase. If such malfunction occurs during the specified period, the product will be repaired or replace (at our option) without charge. The product will be returned to the customer prepaid. Exclusions and Limitations: The Limited Warranty does not apply to: (a) exterior finish or appearance; (b) certain specific items described in the individual product-line statement(s) below, or in the individual product data sheet or owner’s manual; (c) malfunction resulting from use or operation of the product other than as specified in the product data sheet or owner’s manual; (d) malfunction resulting from misuse or abuse of the product; or (e) malfunction occurring at time after repairs have been made to the product by anyone other than Electro-Voice or any of its authorized service representatives. Obtaining Warranty Service: To obtain warranty service, a customer must deliver the product, prepaid, to Electro-Voice or any of its authorized service representatives together with proof of purchase of the product in the form of a bill of sale or receipted invoice. A list of authorized service representatives is available from Electro-Voice at 600 Cecil Street, Buchanan, MI 49107 (616/6956831 or 800/234-6831). Incidental and Consequential Damages Excluded: Product repair or replacement and return to the customer are the only remedies provided to the customer. Electro-Voice shall not be liable for any incidental or consequential damages including, without limitation, injury to persons or property or loss of use. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. Other Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. Service and repair address for this product: Electro-Voice, 600 Cecil Street, Buchanan, MI 49107 (616/695-6831 or 800/234-6831) or Telex Communications, West 1st Street, Blue Earth, MN 56013 (507-326-3205). Specifications subject to change without notice. Electro-Voice Electronics are guaranteed against malfunction due to defects in materials or workmanship for a period of three (3) years from the date of original purchase. Additional details are included in the Uniform Limited Warranty Statement. M2 High-Performance Stereo Mixing Console M2 High-Performance Mixing Console 3 Figure 1—Input Controls Figure 2—Output Section M2 High-Performance Stereo Mixing Console M2 High-Performance Stereo Mixing Console Specifications Input Specifications Output Specifications M2 High-Performance Stereo Mixing Console Conditions: 1. 0 dBu = 0.775 V rms. 2. 0 dBv = 1.0 V rms. 3. Measurements are referred to a 1kHz, 0-dB sine wave input unless noted. 4. 120-V, 60-Hz ac line voltage. Frequency Response, Mic Input to Master Output (EQ flat): 20 – 20,000 Hz (+1/-2 dB) Total Harmonic Distortion, 20 – 20,000 Hz at +14 dBu Output into 600 ohms: <0.1% Equivalent Input Noise (150 ohm termination): -127 dBv, microphone input Output Noise at Balanced Outputs: -95 dB residual output noise Maximum Voltage Gain, Microphone Input to Master and Mono Output: 84 dB Microphone Input to Aux Send 1–2: 76 dB Microphone Input to Aux Send 3–4: 86 dB Aux Return 1–2 to Master Output: 16 dB Crosstalk, Adjacent Inputs: >-70 dB at 1 kHz Crosstalk, Adjacent Outputs: >-70 dB at 1 kHz Level Displays, Type: 10-segment LED Ladders Range: -20 to +6 dB Reference: 0 VU = +4 dBu (1.23 volts) Input Channel Equalization: +15 dB low cut/boost centered at 80 Hz +15 dB mid cut/boost variable from 250 Hz – 5 kHz +15 dB high cut/boost centered at 12 kHz Input Channel Gain Contro...

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories