Log:
Évaluations - 4, GPA: 4 ( )

Instructions Korg, Modèle Elec Tribe EA-1

Fabricant : Korg
Taille : 15.28 mb
Nom Fichier : EA1_OM_633662265762540000.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Press the Play/Pause key to playback the selected song. Playing from the beginning of a position or song (Reset & Play) While a song is playing, you can hold down the Shift key and press the Play/Pause key to start playback from the beginning of the pattern specified for the currently-playing position. In addition, you can press the Play/Pause key while a song is playing to pause the playback, and then hold down the Shift key and press the Play/Pause key to playback from the beginning of the song. a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a5.Song mode 5.Song mode 35 Creating a song Creating a song from scratch Here's how to create a song by placing patterns in the desired order. If you switch to a different song while editing a song, your edited data will be lost. If you wish to keep the edited song, you must perform the Write operation to save the song data. Erasing song data (Clear Song) 1. If the song is playing, press the Stop/Cancel key to stop playback. Then select the song that you wish to erase. 2. Hold down the Shift key and press step key 16 (Clear Song). (Key 16 will blink.) 3. Press step key 16 once again to erase the song data. To cancel, press the Stop/Cancel key. If you erase the song data by mistake, rotate the dial to re-select the song before you save it. This will restore the data to its original condition. 2 2,3 Specifying a pattern for each position Position 001...256 Pattern A01...d64 Specify a pattern for each position. When doing this, please turn the Keyboard function key off (the key will go dark). 1. Use the cursor keys to make the parameter select LEDs indicate Position. Notice that the display indicates "001." 2. Use the cursor keys to make the parameter select LEDs indicate Pattern. 3. Rotate the dial to select the pattern that you wish to assign to position "001." 4. Press the select [ ] key to advance to the next position. The display will indicate "End." 5. Rotate the dial to select the pattern. The pattern you select here will be the pattern for position "002." 6. When you select a pattern for the "End" position, the "End" will move to the next position. Repeat steps 4 and 5 to assign as many patterns as you wish. To playback the completed song from the beginning, press the Play/Pause key once, and then press the Stop/Cancel key. Alternatively, use the cursor keys to make the parameter select LEDs indicate Position, and rotate the dial or use the select keys to set the position to "001." Then press the Play/Pause key. 3,5,6 1,2 4,6 If you wish to view the order of patterns in the song, or to reselect the pattern for a specific position, make the parameter select LEDs indicate Pattern. Each time you press a select key, you will move to the next or previous position. You can use the dial to change the pattern number that is displayed. Pattern Use the select keys to move through the positions, and use the dial to select patterns Alternatively, you can make the parameter select LEDs indicate Position, and use the dial or select key to select the position you wish to check. Then make the parameter select LEDs indicate Pattern, and view or change the pattern. Pattern Position At the Position setting use the select keys or dial to move; then select Pattern and use the dial to select or view the pattern. 5.Song mode a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a 36 Specifying the pitch of each pattern Pitch Offset –24...24 This function offsets the pitch of the pattern at the specified position within the song. Pitch Offset simply offsets the pitch within the song. It does not affect the pitch data of the pattern itself. 1. If the song is playing, press the Stop/Cancel key to stop playback. 2. Use the cursor keys to make the parameter select LEDs indicate Position. 3. Use the dial or Select keys to select the position whose pitch you wish to offset. 4. Use the cursor keys to make the parameter select LEDs indicate Pitch Offset. 5. Use the dial to specify the desired pitch offset. +/–1 offsets the pitch by a semitone, +/–2 by a whole tone, +/–7 by a fifth, and +/–12 by one octave. Even when the parameter select LEDs indicate Pitch Offset, you can use the Select keys to move the position forward or backward in single steps. 3,5 2,4 3 Editing a song You can insert a new pattern into a song, or delete an existing pattern. You can also add knob movements or your own performance to a song. If you wish to keep the edited song, you must perform the Write operation. If you select a different song or turn off the power without performing the Write operation, the song will return to the state in which it was before you edited it. Inserting a pattern at a specified position (Insert Pattern) You can insert a pattern at a specified position, and subsequent patterns will be moved backward (toward the end of the song). Insert a new pattern at position 3 Position 1 End Pattern A01 (16Steps) Pattern D01 (32Steps) Patter...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories