Évaluations - 3, GPA: 3.3
(
)
)
|
Facilité d'utilisation
In addition, patterns built into the KAOSS PAD Entrancer can be used instead of the video input as material for modification. Pattern Display mode Hold down the [FUNCTION] key and press the [SAMPLE 1] key to enter Pattern Display mode; the [PROGRAM/BPM] display will blink indicate either Pattern Display mode or the pattern select number. If you display a pattern while playing back a motion video sample, playback will stop. When you play back the sample once again, pattern display mode will be cancelled and the sample will play back. Exiting Pattern Display mode To return to normal operation, either touch the touch-pad, press the [FUNCTION] key, or simply do not operate the KAOSS PAD Entrancer for ten seconds. Displaying a pattern From Pattern Display mode, press one of the [PROGRAM MEMORY 1–8] keys to recall the pattern that is pre-selected for that key. You can press the [SAMPLE 1] key to turn the last-selected pattern on/off. To cancel the display To cancel the display, press the selected [PROGRAM MEMORY 1–8] key once again. The display will also be cancelled if you switch programs during normal operation. The display will be not cancelled if you hold down the [FUNCTION] key and turn the program knob to change programs. Effect clip patterns (40–59) will appear when you operate the touch pad. Switching patterns In Pattern Display mode, you can hold down one of the [PROGRAM MEMORY 1–8] keys and turn the [PROGRAM/BPM] knob to switch the pattern that is assigned to that key. If that key is selected, you can simply turn the [PROGRAM/BPM] knob to switch patterns. Storing the modified settings In Pattern Display mode, press and hold the [REC/STOP] key for one second or longer to store the modified settings. The settings of MIDI Edit mode will also be stored at this time. If you turn off the power without storing, the settings will revert to their previous state. To stop the pattern display from being turned off when you change programs Hold down the HOLD key while you turn on the power. (The HOLD key will light for a short time.) To cancel Turn off the power, and then turn it on in the normal way. Pattern types 00–39: Impose patterns These layer a superimposed pattern (such as the waveform of the input signal, or touch pad position information) onto the image. You cannot apply an effect to the imposed pattern or sample it. 40–59: Effect clip patterns These patterns display color patterns or image data. You can use these as effect materials. If you have selected a program from other than the “SAMPLE/PLAY” group, you cannot display these except while recording. 11 Using MIDI In addition to using the KAOSS PAD Entrancer as an effect processor, you can use it as a realtime controller that can transmit MIDI messages to control a synthesizer or other external MIDI device. If the KAOSS PAD Entrancer is connected to a MIDI sequencer, the MIDI messages transmitted when you operate the touch-pad can be recorded on the MIDI sequencer and then played back to reproduce all of your touch-pad operations. About the MIDI implementation chart The owner’s manual of each MIDI device contains a “MIDI implementation chart.” This chart is designed to show what type of MIDI messages this particular device is able to transmit and receive. When using two MIDI devices together, compare the implementation charts of the two devices to verify that they can communicate with each other. * Detailed MIDI specifications are listed in the MIDI Implementation. MIDI Edit mode On the KAOSS PAD Entrancer, use the MIDI Edit mode to access the MIDI-related settings. Hold down the [FUNCTION] key and press the [SAMPLE 2] key to enter MIDI Edit mode. The MIDI channel will blink in the [PROGRAM/BPM] display. Setting the MIDI channel In MIDI Edit mode, the [PROGRAM/BPM] display shows the MIDI channel. In this state you can use the [PROGRAM/BPM] knob to change the MIDI channel. About MIDI channels MIDI uses sixteen “channels” (1–16) to independently send data along a single cable to more than one MIDI device. If the transmitting device is set to MIDI channel “1,” the MIDI messages will not be received unless the receiving device is also set to MIDI channel “1“. MIDI functions What is MIDI? MIDI (Musical Instrument Digital Interface) is a world-wide standard for exchanging a wide variety of performance-related data between electronic musical instruments, effect processors, sequencers, etc. and computers. MIDI connections Use commercially available MIDI cables to send or receive MIDI messages. Connect the KAOSS PAD Entrancer’s MIDI connectors to the MIDI connectors of the external MIDI device to/from which you want to send/receive data. MIDI IN connector: Receives MIDI messages from another MIDI device. Connect this to the MIDI OUT connector of the external device. MIDI OUT connector: Transmits messages from the KAOSS PAD Entrancer. Connect this to the MIDI IN connector of the external device. Connection example Here is an example of connecting the KAOSS PAD En...