Évaluations - 2, GPA: 3
(
)
)
|
Facilité d'utilisation
The monitor signal comes from the Prefader. This means it will not be affected by the channel faders. You can monitor each channel individually. Connect your headphones to the HEADPHONES jack. Turn the CUE MIXING CONTROL to CUE and select the desired channels with the PFL switches. When you turn the CUE MIXING CONTROL to PGM (PFL switches without function), you can cue the output signal of the mixer. If the CUE MIXING CONTROL is set to the center position, you can cue both the channel signal you selected and the output signal. With the CUE LEVEL control, you can adjust the phones volume without changing the output signal. 15. CUE LEVEL VOLUME CONTROL - Adjusts the headphone output level. 16. HEADPHONES JACKS - Use this jack to connect the headphones. Headphones from 8 Ohms to 600 Ohms can be used. 16 Ohms is recommended. 2 separate headphone inputs are conveniently located on the face panel and bottom front panel. 17. CHANNEL EQUALIZER "ROTARY KILLS" - BASS/MID/TREBLE CONTROL - Used to increase or decrease the LOW's, MID’s, and HI’s of the input signal. The Q-2221/X features "Rotary Kills" with -30dB to +20db input control. 18. FADER CURVE SWITCH - Changes Feather Fader™ Crossfader from a NORMAL CURVE to a QUICK CURVE (used for crabbing). 19. ON/OFF “Q” START- This function works in conjunction with a compatible American DJ "Q" Start CD player. When used with a compatible CD player, you can use the crossfader to start and stop the CD Player with the slide of the fader. The ON/OFF “Q” START switch activates this FADER “Q” START feature. When in the ON position, the FADER “Q” START allows the fader to return automatically to preset digital CUE POINTS on your compatible American DJ CD Player. For example, each time you slide the crossfader to far left the CD Player will be triggered to play the song from the beginning of the preset CUE POINT. Refer to your American DJ CD Player User Manual for setting CUE POINTS. Turn the ON/OFF SWITCH to the Off position to disengaged “Q” Start function and resume to a normal fader. ©American DJ Supply® - - Q-2221/X User Instructions page 6 Rear Panel - Functions and Controls 21 22 23 f4menôc6Ut *DÇ. LIG HT CONTROL MIC o o l(5"ô 6~ö • ö"ö è- 1 • • Ad IN- Ak 2 GND I GND I MASTER OUTPUT AUX2T PH0N02Y TL AUX1 PHON01 LINE2 PHONO 2 .1 LINE 1 phOno 1 aUx 2 1 I aUx 1 VCH-2-\-1 \ Q-CH-t 24 (2^ (2^(2^(2^ (2^(3^ (31 32 SERIAL NO: B A R 20. AC VOLTAGE SELECTOR - Select between 115V/50Hz or 230V/60Hz. Make sure that the selector is set to the proper voltage you are using. 21. PLAYER CONTROL - Input mini plugs from CD player controller into these jacks, input CD 1 into jack A and CD 2 into jack B. 22. LIGHT CONTROL - Buffered audio output for light controllers that can use external input. Great for Touch Panels and Chase Controllers. 23. MIC JACK - Connect your microphone with 1/4 inch (6.3mm) jack plug here. The signals may be controlled by the DJ MIC CONTROL KNOB (19). BASS & TREBLE can be adjusted by the DJ MIC BASS CONTROL KNOB and the DJ MIC TREBLE CONTROL KNOB (19). 24. AC CONNECTION - Standard IEC plug with detachable AC power cord. 25. MASTER OUT - Parallel output of P.A. output. Connect with the input of a power amplifier. 26. REC OUT - Connect to your record unit. The REC OUT level is not influenced by the master control. 27. CHANNEL 2/LINE 2 RCA INPUT JACKS - Connect CD players or Tape Decks to LINE inputs. Line level musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected to LINE inputs. Turntables should only be connected to "Phono" inputs. The red colored RCA jack represents the right channel input and the white represents the left channel input. 28. CHANNEL 2/PHONO 2/AUX 2 INPUT JACKS - The type of input must directly reflect the selected mode of the Aux/Phono Selector Switch (29). Connect turntables equipped with MM pickup cartridge to PHONO inputs. CD players or Tape Decks should be connected to AUX LINE input. Line level musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected to AUX LINE inputs. The red colored RCA jack represents the right channel input and the white represents the left channel input. ©American DJ Supply® - - Q-2221/X User Instructions page 7 Rear Panel - Functions and Controls Cont 29. PHONO / AUX SELECTOR SWITCH - This switch is used to change the mode of PHONO/AUX INPUT JACKS (28). When using a turntable select PHONO, and when using other input devices select AUX. The PHONO /aUx SELECTOR SWITCH gives the DJ the possibilities of 4 inputs lines (ie. 4 lines CD, tape etc.; or 2 lines CD, tape etc. and 2 phono lines). 30. CHANNEL 2/LINE 2 RCA INPUT JACKS - Connect CD players or Tape Decks to LINE inputs. Line level musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected to LINE inputs. Turntables should only be connected to...
Ce manuel est également adapté pour les modèles :Instruments de musique - Q-2221/X (1.26 mb)