Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
These are specifications which provide a reference to the coverage characteristics of the enclosure. These parameters provide insight for proper enclosure placement and installing the chosen environment. The blending of the MF1-X Mark III components exhibit a desirable beamwidth and directivity factor (Figures 4 and 5) suitable for all high level sound reinforcement applications. POWER HANDLING There are many different approaches to power handling ratings, the most common being EIA standard RS-426A. The derived shape of this test spectrum was an attempt to simulate the spectral content of contemporary music. Although it does resemble contemporary music, EIA-RS-426A does-not contain the same levels of very low frequency material found in live music situations. Very high levels of low frequency material produce distortion and, ultimately, device failure. The presence of the low frequency material will therefore yield lower device ratings than produced by EIA standard RS-426A. Although the Peavey ratings are lower than those produced by the EIA test spectrum, they are far more reliable and will have a direct correlation to real world situations. Figure 1. FREQUENCY RESPONSE 100 Hz 200 Hz 500 Hz 1kHz 2 kHz 5 kHz 10 kHz 20 kHz Figure 2. IMPEDANCE Figure 4. BEAMWIDTH VS. FREQUENCY 100 Hz 1000 Hz 10000 Hz Figure 5. DIRECTIVITY 5 dB per Division HORIZONTAL - 500 Hz - 2 kHz -8 kHz ....... 1 kHz ....... 4 kHz .......16 kHz 5 dB per Division VERTICAL Figure 3. POLAR PATTERNS MF1-X MARK III SERIES7 A Product of Peavey Electronics Corp. Meridian, Mississippi U.S.A. MAX POWER: 300W RMS (program) 150W RMS (34.6V RMS Cont.) IMPEDANCE: 8 OHMS CROSSOVER: 600 Hz CAUTION THIS SPEAKER SYSTEM CAN PERMANENTLY DAMAGE HEARING! USE EXTREME CARE SETTING MAXIMUM LOUDNESS! NORMAL LOW FULL RANGE REAR PANEL DETAIL ARCHITECTURAL & ENGINEERING SPECIFICATIONS The loudspeaker system shall have an operating bandwidth of 600 Hz to 16 kHz. The output level shall be 112 dB when measured at a distance of one meter with an input of one watt. The nominal impedance shall be 8 ohms. The continuous power handling shall be 150 watts, maximum program power of 300 watts, with a minimum amplifier headroom of 3 dB. The nominal radiation geometry shall be 90 degrees in the horizontal plane and 45 in the vertical plane. The outside dimensions shall be 30% inches wide by 161/4 inches high by 23% inches deep. The weight shall be 63 lbs. The loudspeaker system shall be a Peavey model MF1-X™ Mark III™. ONE YEAR LIMITED WARRANTY - Note: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P. O. Box 2898, Meridian, Mississippi 39302-2898. Features and specifications subject to change without notice. PEAVEY ELECTRONICS CORPORATION / 711 A Street / Meridian, MS 39302-2898 / U.S.A. / Telephone: (601 ) 483-5365 / Telex: 504115 / Fax: 484-4278 ©1989 #80301017 2/89 Printed in U.S.A....
Ce manuel est également adapté pour les modèles :Instruments de musique - MARK III MF1-X (283.44 kb)