Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
We have worked hand in hand with guitarists from all levels throughout the world to maintain and improve that special ingredient, ‘The Marshall Sound.’ Our range of effects pedals gives the opportunity to augment the classic Marshall tone to add Marshall character to a guitar set-up. All our pedals are made with the same utmost attention to quality, in both materials and manufacture as our world renowned amplifiers, cabinets and combos, in order to provide you with optimum reliability and tone. I would like to wish you every success with all of your musical endeavours and also your new Marshall effects pedal, which I am sure you will find a pleasure to play for many years to come. Yours Sincerely, Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING Do not expose the apparatus to rain or moisture. Do not expose the apparatus to dripping or splashing. No objects filled with liquids should be placed on or near the apparatus. Do not use this apparatus near water. Clean only with dry cloth. Changes or modifications not expressly approved by Marshall Amplification plc could void the user’s authority to operate the equipment. Heed all warnings. Follow all instructions. Keep these instructions. European Product Only 1 ENGLISH Introduction The Bluesbreaker II takes the philosophy of our original Bluesbreaker pedal one step further and features two modes, Blues and Boost. This effectively makes it two pedals in one. Boost Mode is designed with the vintage valve amp or ‘tone purist’ type of guitar player in mind. If you don’t want to alter the tone of your amp at all, but want to drive the front end harder to push the amp further into natural overdrive. The Boost mode features a clean boost controlled by the pedal’s volume control, which will not affect your original tone. It can also be used for boosting the signal which can sometimes be lost when using long leads (particularly with single coil pickups). Blues Mode is reminiscent of the tonal and distortion characteristics of our non master volume amps such as the classic Bluesbreaker combo from the 1960s. This Mode produces a wonderful natural style overdrive for crunchy chord work and singing single notes for truly inspirational leads, all delivered with the warmth and tonality of those early Marshalls. The Bluesbreaker II features a true full passive bypass for the main signal path to ensure complete tonal integrity and has a quality of tone matched only by its versatility. This booklet provides a guide to the Bluesbreaker II’s features for your information. We have also enclosed a number of suggested settings to help you to get started. It should be remembered that these are only suggested settings and you should really experiment whenever you can. If you take the time to explore the many different overdrive and distortion characters of the Bluesbreaker II, you won’t be disappointed. 2 Setting Up Always use good quality shielded leads. Always use 9V regulated DC supply with centre negative. Although it may seem obvious the first action in achieving a good effected sound (be it duration / compression etc.) is to find the perfect bypassed sound. This will then allow the correct level to be set with the effect unit to allow a cut or boost in volume and a realistic tone. On clean channels it is advisable to set the gain (or volume) to a setting of no less than one quarter maximum so as not to get unrealistic results due to any volume dependent tonal shaping on the amplifier preamp. Features 1. Out Jack Socket This is the output of the Bluesbreaker II and is for connection to the amplifier or to another effects pedal. 2. Mode Allows for selection of Boost and Blues modes. Boost Mode completely bypasses the Tone and Drive network of the Bluesbreaker II and adds a clean boost to the signal controlled by the Volume (Item 7) control. This will give your guitar an extra lift and is ideal for driving the front end of a valve amp into distortion without affecting your all important tone. This is particularly suited for amps that are already naturally slightly distorting, giving them an extra kick over the edge, or for boosting your sound for solos. 3 ENGLISH In Blues Mode all controls are operational and the Trouble Shooting Bluesbreaker II will give your guitar a wonderfully creamy, natural sounding bluesy overdrive. This mode is great when using a clean amp but can also be used with an amp that is already distorting for extra Marshall mayhem. 3. Drive This increases the amount of distortion, taking you from vintage breakup, ideal for big crunchy chords and sweet singing blues, to full on overdrive. N.B. This control is only operational when on Blues mode. 4. DC Input For input of a 9V DC adaptor should you not wish to use ba...