Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
*Note: Some of the following functions appear on the unit twice, however they are explained only once because they operate in the same manner on each channel respectively. 8) HEADPHONE VOLUME rotary knob: The HEADPHONE VOLUME rotary knob adjusts the overall volume of the headphone device connected to the HEADPHONE (7) output section. The volume is increased by rotating the knob clockwise, and it is decreased by turning the knob counter-clockwise. 9) MASTER VOLUME rotary knob: The MASTER VOLUME rotary knob adjusts the overall volume of the units output. 10) CHANNEL ROTARY GAIN: The CHANNEL ROTARY GAIN allows you to increase the signal of each individual channel by turning the knob clockwise. The channels signal is lowered when the knob is turned counter-clockwise. 11) CHANNEL VOLUME FADER: The CHANNEL VOLUME FADER alternates the volume of the corresponding channel between the maximum allowable level and 0. 12) VU METER: The CTRL-SIX has a stereo VU METER that allows you to monitor the decibel levels of the OUTPUT section. USB/LINE TOGGLE (12a): Toggles between the LINE input or USB signal for playback and control. 13) MIC VOLUME rotary knob: The MIC VOLUME rotary knob adjusts the overall volume of the microphone connected to the MIDI MIC (3) input section. Turning the knob clockwise increases the volume, and it is decreased by turning the knob counter-clockwise. 14) CROSS FADER: The CROSS FADER allows you to toggle and mix playback between the two channels. 15) 3-BAND EQUALIZER: The 3-BAND EQUALIZER adjusts the tone of each channel by giving you three frequency-bands to adjust, from LOW, MIDRANGE (MID) and HIGH. You can use the CTRL-SIX - EN Connections and System Controls 8 Connections and System Control Conexiones y Control de sistema • Connexions & Utilisation • Anschlusse und Systemeinstellungen adjustment knobs to raise or lower the 3 separate frequencies until the sound of the music program is appropriate for your listening environment. 16) TRACK/ FOLDER SEARCH: The TRACK/ FOLDER SEARCH allows you to navigate through folders or tracks similarly. Turn the knob to the right to advance the selection, or turn the rotary to the left to reverse the selection. Push the knob to engage the selection. 16a) LOAD A/ LOAD B: When you have selected a file for play, it is assigned to channel A or channel B by pressing the LOAD A or LOAD B button. 17) FOLDER OUT: The FOLDER OUT button is used after you are finished navigating through folders. When pressed ONCE it will navigate one level BACK. 18) PLAY: Pressing the PLAY button engages the selected file. 19) PAUSE: Pressing the PAUSE button temporarily stops the file from playing, and freezes it in its current location. Press the PLAY (18) button to start the file. 20) SEARCH: To search within a playing track, press the SEARCH button, and turn the jogwheel clockwise to fast-forward and counter- clockwise to rewind. 21) SCRATCH: Pressing the SCRATCH button engages the unit in scratch mode. The jogwheel is used to simulate the effect of scratching a record. 22) CUE: Creating and storing CUE points is quick and easy. By default, when there is no CUE Point set (or memorized), pressing the CUE button returns the unit to the beginning of the track (0:00.00) and pauses it. To set a CUE point during playback at a time of your choice, simply press PAUSE (13) and then use the SEARCH (14a) function to make any adjustments by frame. When the precise location is found, press CUE to store this point or press any HOT CUE (15a) 1-3 button to store it. While the unit is playing and after the cue point has been programmed, pressing CUE will cause the player to enter the PAUSE mode (PLAY/PAUSE BUTTON blinks) at the programmed cue point (the CUE LED is lit). Holding down the CUE button changes the function to preview , and allows you to stutter start or play from the programmed CUE POINT Releasing the CUE button will return the player to the preset CUE point. 23) CUE 1/ CUE 2 rotary knob: The CUE 1/ CUE 2 rotary knob adjusts the CUE between Channel 1 and Channel 2. 24) PITCH: Pushing and holding the PITCH button activates the PITCH CONTROL SLIDE. You can then select which PITCH percent you want by pressing the PITCH button and choosing 6%, 8%, 10%, 12%, 20%, 25%, 33%, 50%, and 100%. Push and hold the PITCH button again to deactivate this mode. 25)PITCH CONTROL SLIDE: Moving the PITCH CONTROL SLIDE up or down will lower or raise the pitch percentage + or - 6%, 8%, 10%, 12%, 20%, 25%, 33%, 50%, and 100%. 26) PITCH BEND: Pushing the PITCH BEND BUTTONS will automatically raise the pitch up to +16% or lower the pitch down to -16% from the existing pitch setting. Releasing the buttons will return the pitch to the original pitch setting. You can use this function to match the beat when mixing from one song to another. 27) BPM: Press and hold the BPM button to turn on the BPM read out. Once on, you may TAP the button to the beat of the music. After a few TAPS the unit will determine the average B...
Ce manuel est également adapté pour les modèles :Instruments de musique - CTRL-SIX (3.45 mb)