Évaluations - 4, GPA: 3.5
(
)
)
|
Facilité d'utilisation
Receive data O Modulation (Controller number 1) si Status 2nd bvte 3rd bvte Received data is available only ior Accompaniment/SMF Play Voices. | BnH 01H wH n = MIDI channel number: OH-FH (ch.l-ch.16) ■ Channel Voice Messages vv = Modulation depth: 00H-7FH (0-127) I; * Not received when Rx.MODULATION = OFF. (Initial value is ON) O Note off * The resulting effect is determined by System Exclusive messages. With the initial settings, Status 2nd bvte 3rd bvte this is Pitch Modulation Depth. 8nH kkH wH | 9nH kkH ООН % O Portamento Time (Controller number 5) Status 2nd bvte 3rd bvte n = MIDI channel number: OH-FH (ch.l-ch.16) | BnH 05H wH kk = note number: OOH-7FH (0-127) ; vv = note ofi velocity: 00H-7FH (0-127) | n = MIDI channel number: OH-FH (ch.l-ch.16) w = Portamento Time: OOH-7FH (0-127), Initial value = OOH (0) * For Drum Parts, these messages are received when Rx.NOTE OFF = ON for each | Instrument. \ * This adjusts the rate of pilch change when Portamento is ON or when using the * The velocity values of Note Off messages are ignored. Portamento Control. A value of 0 results in the fastest change. I O Data Entry (Controller number 6, 38) • Note on i Status 2nd bvte 3rd bvte Status 2nd bvte 3rd bvte f BnH 06H mmH 9nH kkH vvH | BnH 26H 111 I n = MIDI channel number: OH-FH (ch.l-ch.16) n = MIDI channel number: OH-FH (ch.l-ch.16) kk = note number: 00H-7FH (0-127) ; | mm, 11 = the value of the parameter specified by RPN /NRPN vv = note on velocity: 01H-7FH (1-127) O Volume (Controller number 7) * Not received when Rx.NOTE MESSAGE = OFF. (Initial value is ON) Status 2nd bvte 3rd bvte * For Drum Parts, not received when Rx.NOTE ON = OFF for each Instrument. | BnH 0711 wH О Polyphonic Key Pressure ; n = MIDI channel number: OH-FH (ch.l-ch.16) Status 2nd bvte 3rd bvte w = Volume: 00H-7FH (0-127), AnH kkH wH Initial Value = 3FH 63 (ch.l, 3-16) 35H 53 (ch.2) n = MIDI channel number: OH-FH (ch.l-ch.16) kk = note number: OOH-7FH (0-127) •! * Volume messages are used to adjust the volume balance of each Part. w = key pressure: OOH-7FH (0-127) * Not received when Rx.VOLUME = OFF. (Initial value is ON) * Not received when Rx.POLY PRESSURE (PAf) = OFF. (Initial value is ON) O Pan (Controller number 10) * The resulting effect is determined by System Exclusive messages. With the initial settings, 5 Status 2nd bvte 3rd bvte there will be no effect. BnH 0AH wH n = MIDI channel number: OH-FH (ch.l-ch. 16) • Control Change vv = pan: 00H-40H-7FH (Left-Center-Right), Initial Value = 40H (Center) * When Rx.CONTROL CHANGE = OFF, all control change messages except for Channel | Mode messages will be ignored. i 4 For Rhythm Parts, this is a relative adjustment of each Instrument's pan setting. " The value specified by a Control Change message will not be reset even by a Program * Not received when Rx.PANPOT = OFF. (Initial value is ON) Change, etc. О Bank Select (Controller number 0, 32) \ O Expression (Controller number 11) S Status 2nd bvte 3rd bvte Status 2nd bvte 3rd bvte BnH 0BH wH BnH 00H mmH BnH 20H 11H | n = MIDI channel number' OH-FH (ch.l-ch.16) w = Expression: OOH-7FH (0-127), n = MIDI channel number: OH-FH (ch.l-ch.16) | Initial Value = 7FH (127) mm, 11 = Bank number. 00H, 00H-7FH, 7FH (bank.l-bank.16384), | Initial Value = 00 00H (bank.l) [ * 11 can be used independently from Volume messages. Expression messages are used for * Not received when Rx.BANK SELECT = OFF. "Rx.BANK SELECT" is set to OFF by "Turn musical expression within a performance; e.g., expression pedal movements, crescendo and decrescendo. * Not received when Rx.EXPRESSION = OFF. (Initial value is ON) General MIDI System On," and set to ON by "GS RESET" or the arranger playback. | (Power-on default value is ON.) * Bank number LSB will be handled as 00H regardless of the received value. However, '( when sending Bank Select messages, you have to send both the MSB (mmH) and LSB (UH, £ the value should be 00H) together. t ’ Bank Select processing will be suspended until a Program Change message is received. | 71 О Hold 1 (Controller number 64) Status 2nd bvte 3rd byte BnH 40H wH O Effect 1 (Reverb Send Level) (Controller number 91) Status 2nd bvte 3rd bvte BnH 5BH vvH n = MIDI channel number: vv = Control value: OH-FH (ch.l-ch.16) 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON * Not received when Rx.HOLDl = OFF. (Initial value is ON) O Portamento (Controller number 65) Status 2nd bvte 3rd bvte BnH 41H wH n = MIDI channel number: vv = Control value: OH-FH (ch.l-ch.16) 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON n = MIDI channel number: OH-FH (ch.l-ch.16) vv = Control value: 00H-7FH (0-127), Initial Value = 28H 40 (except ch.9) 29H 41 (ch.9) * This message adjusts the Reverb Send Level of each Part. O Effect 3 (Chorus Send Level) (Controller number 93) Status 2nd bvte 3rd bvte BnH 5DH vvH Not received when Rx.PORTAMENTO = OFF. (Initial value is ON) n = MIDI channel number: vv = Cont...