Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
* This is used as the data of the [LFO PITCH] knob. * When recording, this is recorded in the sequencer data itself. .Foot Control (Controller number 4) Status 2nd byte 3rd byte BnH 04H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) * Only the pad part the and percussion parts can be received. * This is used as the position data of the pedal connected to the EXP PEDAL/HH CTRL jack. * When recording, this is recorded in the sequencer data itself. .Data Entry (Controller number 6) Status 2nd byte 3rd byte BnH 06H mmH n = MIDI channel number: 0H - FH (ch.1 - ch.16) mm = The value of the parameter specified by RPN. * Only the melody parts can be received. * Not recorded in the sequencer. On the normal mode of HPD-15, RPN can be used to modify the following parameters. RPN MSB LSB 00H 00H 7FH 7FH Data entry MSB LSB mmH ----- --Explanation Pitch Bend Sensitivity mm: 00H - 18H (0 - 24 semitones) LSB: ignored (processed as 00H) specify up to 2 octaves in semitone steps RPN null set condition where RPN is unspecified. The data entry messages after set RPN null will be ignored. (No Data entry messages are required after RPN null). Settings already made will not change. MSB,LSB of data entry: ignored .Volume (Controller number 7) Status BnH 2nd byte 07H 3rd byte vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) * Only the percussion parts and the melody parts can be received. * This is used as the part level of the sequencer pattern data. * Not recorded in the sequencer. .Pan (Controller number 10) Status 2nd byte 3rd byte BnH 0AH vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 40H - 7FH (Left - Center - Right) * In the melody parts, it is used as the part panpot of the sequencer pattern data. * In the pad part or the percussion parts, it is used as the data of the [PAN] knob. * When recording, this is recorded in the sequencer data itself if it is received on the pad part or the percussion parts. MIDI Implementation .Expression (Controller number 11) Status 2nd byte 3rd byte BnH 0BH vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) * Only the pad part and the percussion parts can be received. * This is used as the data of the [LEVEL] knob. * When recording, this is recorded in the sequencer data itself. .Effect Control 1 (Controller number 12) Status 2nd byte 3rd byte BnH 0CH vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) * Only the pad part and the percussion parts can be received. * This is used as the data of the [M-FX DEPTH] knob. * When recording, this is recorded in the sequencer data itself. .General purpose controller 1 (Controller number 16) Status 2nd byte 3rd byte BnH 10H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) * Only the pad part and the percussion parts can be received. * This is used as the position data of the pad A1. * When recording, this is recorded in the sequencer data itself. .General purpose controller 2 (Controller number 17) Status 2nd byte 3rd byte BnH 11H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) * Only the pad part and the percussion parts can be received. * This is used as the position data of the pad A5. * When recording, this is recorded in the sequencer data itself. .Hold 1 (Controller number 64) Status 2nd byte 3rd byte nH 40H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON * When recording, this is recorded in the sequencer data itself. .Sostenuto (Controller number 66) Status 2nd byte 3rd byte BnH 42H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON * Only the pad part and the percussion parts can be received. * If the value is 64 and over, the Modify Lock will be done. If the value is 63 and under, the Modify Lock will be canceled. * When recording, this is recorded in the sequencer data itself. .Soft (Controller number 67) Status 2nd byte 3rd byte BnH 43H 00H n = MIDI channel number: 0H - FH (ch.1 - ch.16) * Only the pad part and the percussion parts can be received. * When this message is received, the Modify Clear will be done. * When recording, this is recorded in the sequencer data itself. .Sound Controller 1 (Controller number 70) Status 2nd byte 3rd byte BnH 46H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) * Only the pad part and the percussion parts can be received. * This is used as the data of the [SWEEP] knob. * When recording, this is recorded in the sequencer data itself. .Sound Controller 5 (Controller number 74) Status 2nd byte 3rd byte BnH 4AH vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) * Only the pad part and the percussion parts can be rec...