Fabricant : Roland
Taille : 10.24 mb
Nom Fichier :
|
Facilité d'utilisation
2. Secure the strap to the strap pin. Attach the strap securely so that it does not easily become detached. If the strap is loose, and you use it that way when carrying the MOBILE CUBE, the amp could be dropped, possibly resulting in damage or injury. * Use only the provided strap. The included strap is meant for exclusive use with the MOBILE CUBE. Do not use this strap for other products. * Do not spin or swing the MOBILE CUBE while holding it by the strap. This is extremely dangerous, as it may cause the strap to become detached; or, if the motion is repeated enough, may even break the strap. + - + - + - + - + - + - Strap pin 6 Panel Descriptions Control panel MIC This is a dedicated microphone input. It can be used simultaneously with KEYBOARD/ INSTRUMENT/ GUITAR and AUX. 1. VOLUME Knob Adjusts the microphones volume. * Howling could be produced depending on the location of microphones relative to speakers. This can be remedied by: 1. Changing the orientation of the microphone(s). 2. Relocating microphone(s) at a greater distance from speakers. 3. Lowering volume levels. KEYBOARD/INSTRUMENT/GUITAR This accommodates any type of input, including a keyboard or other electronic musical instrument, a recorder or audio device, or an acoustic guitar or electric guitar. 2. Type Switch Set this to the type of device that you’ve connected to the KEYBOARD/ INST jack. A-GUITAR Select this if you’ve connected an acoustic guitar that has a pickup Use the L/ MONO GUITAR jack to make connections. The R jack cannot be used. KEYBOARD/INSTRUMENT (stereo input is supported) Select this if you’ve connected an instrument such as a keyboard or a guitar multi-effects device. You can choose either a NORMAL or FAT tone. NORMAL This provides flat tonal response. FAT This provides a powerful tone with boosted midrange. AUDIO (stereo input is supported) Select this if you’ve connected an audio device, a recorder, or a mixer. This is ideal for monitoring the mixed sound. E-GUITAR Select this if you’ve connected an electric guitar. Three types of sound are available: CLEAN, OVERDRIVE, and DIST (distortion). Use the L/ MONO GUITAR jack to make the connection. The R jack cannot be used. CLEAN This provides a bright, clear sound. OVERDRIVE Natural distortion sound similar to that obtained by turning an amp’s volume up completely. DIST (DISTORTION) Harder distortion than OVERDRIVE. 1 2 3 4 5 6 7 8 Espanol Italiano Fran cais Deutsch Engl ish Po rtugues Ned e rlands 7 Panel Descriptions 3. VOLUME Knob This adjusts the volume of the device connected to the Keyboard/ Instrument/ Guitar input jack(s). 4. CHORUS Switch Pressing the CHORUS switch will turn on the chorus effect. The MOBILE CUBE’s chorus effect is a spatially synthesized chorus that takes advantage of stereo playback to generate an expansive sensation. What’s spatially synthesized chorus With spatially synthesized chorus, a method available only in stereo, the chorus effect is created by taking the sound from the right speaker (from which the effect sound is output), and the sound from the left speaker (which outputs the direct sound), and then mixing them in the actual space. This creates a greater lateral spread than that produced when the sounds are mixed electronically, providing a more natural sense of breadth. AUX 5. CENTER CANCEL Switch Pressing the CENTER CANCEL switch will eliminate sounds (such as vocals or guitar solos) located in the center of the stereo source from the music CD or other device connected to AUX IN. This is convenient when you want to use the source for karaoke or for guitar practice. * For some stereo sources, it may not be possible to obtain a sufficient cancellation effect. * If you’re using an MP3 player or other digital audio device, the sound may not play back correctly, depending on how the source was compressed. TONE and DELAY/REVERB * The effect applies only to the device connected to MIC and to the KEYBOARD/ INSTRUMENT/ GUITAR input jacks. 6. TONE Knob This adjusts the tone. Turn the knob clockwise for a brighter tone; to get a milder tone, turn the knob counterclockwise. 7. DELAY/REVERB Knob Turn this knob to DELAY or REVERB to switch to that effect. Turn the knob to adjust the amount of effect applied. DELAY Turn the knob to change the time and amount of delay effects. What’s DELAY A delay is a little bit like an echo, and by repeating the original sound after it is played, this effect can add a sense of spaciousness and depth to the sound. In addition, when this effect is applied to instruments that play melodies, it can make their performance sound smoother or can add an extra bounce to their rhythm. REVERB (Stereo REVERB) Spacious-sounding stereo reverb is provided. Turn the knob to adjust the reverb level. What’s REVERB By adding reverberation to a sound, this effect imbues the sound with a sense of spaciousness and depth. 8. Power Indicator This indicator lights when the unit is turned on. * When operating on battery power only, the uni...