Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
Press the [SHIFT] footswitch to activate Shift mode (secondary footswitch functions). The [SHIFT] indicator lights. 2. Press the [HOLD/PARAMETER] foot switch. The [PARAMETER] indicator flashes. 23 Advanced settings (Parameter mode) Dynamic MIDI Pedal PK-6 Advanced settings (Parameter mode) Dynamic MIDI Pedal PK-6 3. Press the [OCTAVER BASS/DOWN] or [PORTAMENTO/UP] footswitch to select the “Wri” parameter. wri 4. Press the [ENTER] pedal to confirm. The display shows “ok” and the PK-6 leaves Parameter mode. Parameter settings Below please find a list of the PK-6 parameters you can set. Retrigger Display Value Default rEt Off, On Off When this parameter is on, some special effects can be obtained. In MONO mode, the pedal board is monophonic: if you press two pedals simultaneously, only the last note played will sound. When that note is released, the previous note will sound, so a pleasant alternating effect can be obtained. NOTE This parameter is only used in MONO mode. Velocity Display Value Default vEl On, 1~127 On If this parameter is on, your playing dynamics are translated into MIDI velocity values (1~127). If you choose a fixed value (1~127), the PK-6 transmits all notes with that value. Touch (velocity curve) Display Value Default tCh Lit (Light), Med Med (Medium), Hea (Heavy) Portamento Time Display Value Default Por 0~127 50 “Portamento” means that the pitch doesn’t change in clearly defined steps: it produces glides from one note to the next. Use this parameter to specify the speed at which those glides are carried out. The higher the value, the slower the transitions. NOTE If the receiving MIDI instrument doesn’t support this parameter, this setting will have no effect. Octaver value Display Value Default oCv –4~–1 –1 This parameter allows you to specify the pitch of the note that is added while the [OCTAVER BASS] footswitch lights. See page 17 for details. Pedal Assign Display Value Default Exp (Expression), Cut Exp (Cutoff), Res (Resonance), Pbd, (Pitch Bend Down), (Expression) Pbu (Pitch Bender Up), Mod (Modulation), Hld (Hold), Vol (Volume), Pan (Panpot), C16 (Control Change 16), C17 (Control Change 17), C18 (Control Change 18), C19 (Control Change 19) Ped This parameter allows you to assign a function to the pedal you connect to the EXTERNAL PEDAL socket. r The PK-6’s pedals are velocity sensitive. If necessary, you can select a different velocity curve to suit your playing style. 24 Parameter settingsDynamic MIDI Pedal PK-6 r Parameter settingsDynamic MIDI Pedal PK-6 r H MIDI Controller User Edit Display Value Default Ctu Not, FA (Start), FB (Conti- See nue), FC (Stop), In1 “MIDI (Intro1), In2 (Intro2), In3 CONT( Intro3), In4 (Intro4), Mn1 ROLLER (Main1), Mn2 (Main2), mode” on Mn3 (Main3), Mn4 page 16. (Main4), Fu1 (Fill Up1), Fu2 (Fill Up2), Fu3 (Fill Up3), Fd1 (Fill Down1), Fd2 (Fill Down2), Fd3 (Fill Down3), En1 (Ending1), En2 (Ending2), En3 (Ending3), En4 (Ending4), Brm (Break Mute), Oin (Old Intro), Oen (Old Ending), Ofv (Old Fill To Variation), OFo (Old Fill To Original) Using this parameter, you can assign the desired control functions to the PK-6’s pedals. See also “MIDI CONTROLLER mode” auf S. 16. Proceed as follows: (a) Press the [SHIFT] footswitch to activate Shift mode (secondary footswitch functions). The [SHIFT] indicator lights. The display shows“---”. (b) Press the [HOLD/PARAMETER] footswitch. The [PARAMETER] indicator flashes. (c) Press the [OCTAVER BASS/DOWN] or [PORTAMENTO/ UP] footswitch to select the “CtU” parameter. (d) Press the [ENTER] pedal to confirm. The display now shows “---” to signal that you need to press a pedal. (e) Press the pedal you want to assign a new function to. The display shows the function currently assigned to that pedal. (f) Press the [OCTAVER BASS/DOWN] or [PORTAMENTO/ UP] footswitch to select the desired function (see the table above). (g) If you want, repeat from step (e) to assign a new function to the other pedals. (h) When finished, press the [SHIFT] footswitch to exit Parameter mode. Drum User Edit dru 1~128 See “DRUM mode” on page 15. This parameter allows you to select note numbers to the pedals, which will be used in DRUM mode—but only if you select the “drU” setting. See also “DRUM mode” auf S. 15. Proceed as follows: (a) Press the [SHIFT] footswitch to activate Shift mode (secondary footswitch functions). The [SHIFT] indicator lights. The display shows“---”. (b) Press the [HOLD/PARAMETER] footswitch. The [PARAMETER] indicator flashes. (c) Press the [OCTAVER BASS/DOWN] or [PORTAMENTO/ UP] footswitch to select the “drU” parameter. (d) Press the [ENTER] pedal to confirm. The display now shows “---” to signal that you need to press a pedal. (e) Press the pedal you want to assign a note number to. The display shows the note number currently assigned to that pedal. (f) Press the [OCTAVER BASS/DOWN] or [PORTAMENTO/ UP] footswitch to select the desired note number (see the table above). (g) If you want, repeat from step (e) to assign a new note...