Évaluations - 2, GPA: 5
(
)
)
|
Facilité d'utilisation
If you change the UA-1EX’s sampling frequency, you must disconnect the UA-1EX, and then reconnect in order for the new setting to take effect. Noise or distortion occurs when playing back audio The sound is too weak Noise or distortion occurs when playing back audio The sound is too weak If a mic is connected to the UA-1EX, disconnect the mic and turn the input sensitivity knob all the way toward the left (lowering the input level). Have you connected the grounding terminal? Connecting the chassis of your computer or the grounding terminal of your computer’s AC power cord to an electrical ground may solve the problem. Also, make sure that a device that produces a strong magnetic field, such as a television or microwave oven, is not located nearby. Could numerous audio devices be connected? Noise may occur if numerous audio devices are connected. Do not connect audio devices you are not using. Sound from the device connected to the input jacks is distorted Use the UA-1EX’s input volume to reduce the input level. Insufficient volume from a device connected to the line input jacks Could you be using a connection cable with a built-in resistor? Please use a connection cable that does not contain a built-in resistor (such as one from the Roland PCS series). Is the input volume raised to the appropriate level? Try using the input volume to raise the input level. Others Others When Windows 2000 resumes from Suspend or Hibernation, the output volume setting is changed due to a problem of Windows. Using the Windows volume controls, adjust the USB audio (speaker) volume slider. (.“Volume Control setting” (p. 51)) Deleting the driver Deleting the driver (p. 15), Macintosh (p. 27)) to install the driver once again. Windows users 1. With the UA-1EX disconnected, start up Windows. Disconnect all USB cables except for a USB keyboard and USB mouse (if used). * If you are using Windows XP Professional/2000, you must log on using a user name with an administrative account type (e.g., Administrator). 2. Insert the CD-ROM into the CD-ROM drive of your computer. 3. Click the Windows Start button. From the menu that appears, select “Run....” In the “Run...” dialog box, input the following into the “Open” field, and click [OK]. Windows XP/2000 users: D:\Driver\XP2k\Uninstal.EXE Windows Me/98 users: D:\Driver\Me98\Uninstal.EXE * The drive name D: may be different on your system. Use the drive name for your CD-ROM drive. 4. Follow the on-screen instructions to uninstall the driver. Macintosh users Macintosh users 1. With the UA-1EX disconnected, start up Macintosh. * Disconnect all USB cables except for a USB keyboard and USB mouse (if used). 2. Exit all currently running software (applications). If you are using virus checking or similar software, be sure to exit it as well. 3. Prepare the CD-ROM. Insert the CD-ROM into the CD-ROM drive of your Macintosh. 4. In the Driver (Mac OS X) folder of the CD-ROM, double-click “UA1EX_Uninstaller.” * The display will indicate “This uninstalls EDIROL UA-1EX driver from this Macintosh.”, click [Uninstall]. The display will indicate “Are you sure to uninstall the driver?”, click [OK]. 5. The “Authenticate” dialog box will appear, enter the password and click [OK]. 6. The display will indicate “Uninstllation is completed.”, click [Restart]. Your Macintosh will then restart. Macintosh (Mac OS 9) users 1. With the UA-1EX disconnected, start up Windows. * Disconnect all USB cables except for a USB keyboard and USB mouse (if used). 2. Drag “USB UA-1EX Driver” from the Extensions folder into the Trash to delete it. 3. Drag the ASIO driver that you installed in “Installing the ASIO driver” (p. 30) into the Trash to delete it. 4. Restart the Macintosh. UA-1EX Block Diagram ¦ When the recording source select switch is set to ANALOG USB connector USB indicator USB CODEC Input indicator Input monitor switch Digital output connector (optocal) Headphones volume Output indicator Line input jacks Hedphone jack Line output jacks (plug-in powered mic) Mic input jack Input volume ¦ When the recording source select switch is set to DIGITAL USB connector USB indicator USB CODEC Output indicator Line output jacks Hedphone jack Digital output connector (optocal) Digital input connector (optical) Headphones volume ¦ When the recording source select switch is set to DIGITAL, and no input signal is being sent to the digital input connector USB CODEC USB connector USB indicator Output indicator Line output jacks Hedphone jack Headphones volume Digital output connector (optocal) Main Specifications UA-1EX: USB Audio Interface . Number of Audio Record/Playback Channels Record: 1 pair of stereo Play: 1 pair of stereo REC SOURCE switch = ANALOG: Full duplex (except for 96 kHz setting) REC SOURCE switch = DIGITAL: Recording only . Signal Processing PC interface: 24 bits (24-bit operation is available only when ADVANCE switch = ON) AD/DA Conversion: 24 bits (linear) * ADVANCE switch = OFF: 16 bits . Sampling Frequency Digital...