Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
If so, change the position or angle of the piano. • Avoid using the EP-50 in excessive heat or humidity or where it may be affected by direct sunlight or dust. Power Supply • The appropriate power supply for this instrument is shown on its name plate. Please be sure that the voitage system in your country meets this. • This instrument might generate heat while operating, but here is no need to worry about it. Cleaning • Use a soft cfoth and mild detegent for cleaning. • Do not use solvents such as paint thinner. (9) (0) © Front Panel CD Power Switch (£) Monitor Switch This switch turns on or off the speaker (and headphones). When it is oft, signal is sent out only through the Line Out. and there is no sound heard trom the speaker (and headphones). (I1 Volume Knob Key Transpose Button Hold this button down while pressing the key (F' to F) to which you wish to transpose. (5/ Tone Selectors By pressing one ol these buttons, you can select a tone color you like. Select just one tone color at a time. if) Chorus Button Turn this button on (the indicator lights up}, then rich chorus sounds wilt be obtained. ■m: \\vj rVEL *—$ io © run I ¿ №tfT -STEHEC- Pedal Switch DP-2 Keyboard Amp. M/H Audio Amp. H Recording Unit H P. A. Mixer L/M/H Guitar Amo. L/M etc. (?) MIDI Button This button serves to select a MIDI Channel or Program Change number, etc. Rear Panel:--i11 8 MIDI THRU The digitally controlled signal fed into the MIDI IN Connector will be output without processed from this MIDI THRU Connector. By using this Connector it is possible to control more than one device. (D MIDI OUT Connector Through this digitally controlled signal is sent oul trom the EP-50 driving the MIDI device connected. * In the EP-50, the signal received at MIDI In will not be sent from the MIDI OUT. (fi MIDI IN Connector By feeding digitally controlled signal of other MIDI device through this input jack, the EP-50 can be controlled externally. ¡0 Pedal Jack (Damper) This jack is used to connect the supplied Pedal Switch DP-2, tt will function just like a damper pedal of a usual piano © Tune Konb This is used to tune the EP-50 to other musical instrument. At Its center position, A — 442 Hz. " The EP-50 itself never gets out of tune, therefore tuning is not necessary.