Évaluations - 2, GPA: 5
(
)
)
|
Facilité d'utilisation
© — © is no effect. •The function of No. ©to © are discribed in GR-100 GR-300 Instruction Manual. •Bridge Adjustment Respectively adjust the string height or length to proper height or length. O String Height Adjustment With attached hexa-wrench, adjust the string height by rotating the height adjustment screw. By turning this screw clockwise the string height become to raise. Adjust each bridge height to same height by according to the curve of guitar body. ♦ When you adjust the bridge height or replace the strings, it is necessary to check the string that they are properly aligned with the center of the divided pick-up heads. Standard String Height (at the open 14th) 1st 2nd 3rd 4th 5th 6th String , . Height 1.5 1.6 1.7 1.8 1.9 2.0 © String Length (Octave Adjustment) Test intonation at the 12 fret whether the string is sharp or flat in terms of overall intonation. If a string is going sharp at the 12 fret, move back the saddle to add string length by turning the intonation adjustment screw at the bridge frame. If flat, forwards. •Tremolo Unit Adjustment (G-505 ONLY) After turning the guitar, the distance between bottom of tailpiece and surface of guitar body must be within 2 — 2.5 mm. If not, for example when bridge was extremely moved or the different gauge was used, adjust the distance to within 2 — 2.5 mm. O Remove the cover of the reverse side of the guitar. @ Rotate spring adjustment screw with screwdriver. By rotating this screw counterclockwise this distance can be extend. @ Note that the guitar tuning is detuned by adjusting tremolo unit. Otherwise, repeat tuning playing pitch and adjusting tremolo unit. Specifications •Divided Pickup Adjustment With strings tuned to playing pitch raise or lower divided pickup by turning Adjust screws so that clearances between pickup head top and bottom of string are as follows when strings are pressed at 21st fret. 1st string - 0.5 mm 6th string — 0.8 mm G-202' . G-505 BODY Ash Ash NECK . Maple Maple MACHINE HEADS PG-112 PG-112 TAIL PIECE TP-132 TP-142 PICKUP PU-120 PU-134 COLOR WH, RD, BL BS, MR, MB Roland Corporation ...