Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
TRANSMITTED DATA (Normal mode/Multi timbre mode) I Channel voice message I Note off Status 9nH Second kkH n = MIDI Channel kk = Note number • Note i Status 9nH Second kkH n = MIDI Channel kk = Note number vv = Velocity Third 001! : OH - FH (0 - 15) : 0FH - 71H (15 - 113) Third vvH OH - FH (0 - 15) 0FH - 71H (15 - 113) 01H - 7FH (1 - 127) 0 = chJ 15 = ch.16 0 = ch.l 15 = ch.16 * The range may be changed by transposition. * The transpose value can be set with in the range of - 6 to + 5. To transpose the keyboard, while holding down the TRANSPOSE/MIDI switch press the [ b ] switch to key down or [#] to key up, once for each semitone. Pressing the [ b ] switch than 6 times ([#] switch 5 times) does not introduce further effect To return the keyboard back to the original key, press the [ • ]. When the power is first applied, the default transposition is set at 0. The following chart shows the relation between the transmitted note range and transposed value. n = MIDI Channel : 0H,AH,BH.CH,DH (0,10,11,12,13) 0 = ch.! 13 = ch.14 * When the all notes off is recognized, all the notes which have been turned on only by note on messages are turned off. However, if the hold - 1 on message has been recognized, these notes will not be tunned off until the hold - 1 off message is received. ■ System realtime message • Activa sensing Status FEH Transpose Value -6 -5 -4 -3 -2 - 1 0 + 1 + 2 + 3 + 4 + 5 Transmitted note range 15 - 102 16-103 17 - 104 18 - 105 19 - 106 20 - 107 21 - 108 22- 109 23- 110 24-111 25- 112 26 - 113 ■ System exclusive message Status F0H F7H F0H ii = ID Number dd,...,ee = Data F7H Data byte iiH.ddH______eeH System exclusive 41H (65) 00H-7FH (0-127) EOX (End of Exclusive/System common) In multi timbre mode, multi timbre mode off and partial reserve count messages can be recognized. Refer to "Roland Exclusive Message" and section 6. • Control change OHoW - 1 Status BnH Second 40H n = MIDI Channel vv = Control Value OSostanuto Status BnH Second 42H n * MIDI Channel vv = Control Value Third vvH : OH - FH (0 - 15) 0 = ch.l 15 = ch.l6 : 00H, 7FH (0, 127) 0 = OFF 127 = ON Third vvH : OH - FH (0 - 15) 0 = ch.l 15 = ch.l6 : ООН, 7FH (0,127) 0 = OFF 127 = ON OSoft Status BnH Second 43H Third vvH n = MIDI Channel vv = Control Value : OH - FH (0 - 15) 0 = ch.l 15 = ch.16 : 00H, 7FH (0,127) 0 * OFF 127 = ON 24 О Chor и» Status Se¡ BnH 5C n = MIDI Channel vv = Control Value Tone Third wH : OH - FH (0 - 15) 0 = ch.l 15 = ch.16 : ООН, 40H, 7FH (0, 64, 127) 0 = OFF 64 = Chorusl 127 = Chorus2 Piano 1 Piano 2 Harpsichord Vibraphone EPiano * When the CHORUS 1/2 switch is pressed while TRANSPOSE/MIDI switch is being held down, the chorus off/1/2 message sent. * Also, if the power has been applied while the TRANSPOSE/MIDI switch is being held down, the chorus message can be sent by only pressing the CHORUS 1/2 switch. * Program change Status ■ Channel mode message • All notea off Status BnH Secffljd 7BH n = MIDI Channel Program change number 1 0 3 5 6 Third ООН :0H - FH (0 - 15) 0 = ch.l 15 = ch.16 * If the power has been applied while the HARPSICHORD switch is being held down, when all keys on the keyboard are released, the all note off is sent in the basic CnH PPH channel. n = MIDI Channel :0H - FH (0 - 15) 0 = ch.l 15 - ch.16 • OMNI OFF pp = Program change number : ООН - 7FH (0 - 127) Status Second Third ♦ The following chart shows the GROUP,BANK and NUMBER values related to key BnH 7CH ООН position which is set while the TRANSPOSE/MIDI switch being held down. When one of these keys is pressed while TRANSPOSE/MIDI switch is being held n = MIDI Channel : OH - FH (0 - 15) 0 = ch.l 15 = ch.16 down, a program change message will be transmitted. ♦ When the power is first applied, omni off is sent in the basic channel. №.......- GROUP.BANK.NUMBER A3 GROUP A • POLY B3 GROUP В F#2 BANK 1 Status Second Third G # 2 BANK 2 BnH 7FH ООН A # 2 BANK 3 C#3 BANK 4 n = MIDI Channel : OH - FH (0 - CO 2 и II in •u II о Ю D # 3 BANK 5 F# 3 BANK 6 ♦ When the power is first applied, poly is sent in the basic channel. G#3 BANK 7 A # 3 BANK 8 ■ System common message F2 NUMBER 1 G2 NUMBER 2 • Active sensing A2 NUMBER 3 B2 NUMBER 4 Status C3 NUMBER 5 FEH D3 NUMBER 6 E3 NUMBER 7 ♦ Active sensing transmits with in the interval of 300 msec. F3 NUMBER 8 * The transmitted program change number are related with the GROUP,BANK, NUMBER values as follows. HUMBER I 1 BANK 1 2 3 4 5 6 7 8 1 0 1 2 3 4 5 6 7 2 8 9 10 U 12 13 14 15 3 16 17 18 19 20 21 22 23 4 24 25 26 27 28 29 30 31 5 32 33 34 35 36 37 38 39 6 40 41 42 43 44 45 46 47 7 48 49 50 51 52 53 54 55 8 56 57 58 59 60 61 62 63 NUMBER 1 1 2 3 ■+---- 4 5 •+---- 6 •+---- 7 •+----+ 8 BANK ! 1 64 65 66 67 68 69 70 71 2 72 73 74 75 76 77 78 79 3 80 81 ...