Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
Right ■ OPERATING KM-600 'j _ After connecting all cords required, set all knobs on the panel to (0). 2. Make sure that Power switch is to set OFF, and plug power cord into outlet. 3. Set Power switch to ON, and Pilot lamp will light up. 4. Set Panpot volume to proper position to obtain maximal mixing results. ▲ To L for sound from left channel only. .To CENTER for sound from both channel outputs. .To R for sound from right channel only. V—■» V—• 0 10 0 10 MASTER VOLUME 5 Set both L and R Master volume to "5". * Phones out; You can monitor by headphone without reference to the position of Master volume. 0 Set Channel volume to proper position. ♦ When connecting three or more instruments, adjust each channel volume to proper position and then readjust R and L Master volume. * Channel volume not in use should be set to "0". -£>-PEAK 7. When LED Peak indicator lights up, which displays that the signal is ditorted. In this case, decrease the volume level for each channel. Also, if the signal is distorted without lighting up (LED Peak indicator), decrease total volume level by Master volume. ■SPECIFICATIONS Input impedance: Over 33kS2 Input level: 540mV(RMS) Load impedance: Over 1 OkQ' Output level: Max. 6V(RMS) Controls: Channel, volume.......................................6 Panpot volume........................................6 Power switch ..........................................1 Main control: Master volume L...............................1 R...............................1 Jacks: Input..........................................................6 Output L ....................................................1 R ....................................................1 Stereo headphone.......................................1 Peak indicator: 2 Power consumption: 4W Dimensions: 310(W) x 1 65(D) x 70(H)mm Weight: 2.2kg ♦ Specifications are subject to change without notice. Products of Roland mRoland 1017...