Évaluations - , GPA: ( )

Instructions Roland, Modèle ME-8B

Fabricant : Roland
Taille : 2.06 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Par ce dispositif a également d'autres instructions :

Instruments de musique - ME-8B (1.47 mb)

By mixing the direct sound with the distorted sound, you can obtain a sharper and clearer sound. You can use this either as a humanizer that changes a bass sound to a simulated human voice, or an equalizer that adjusts the tone for each frequency band. MODE (HU1.HU2, Eq) This al lows you to select an effect type. When the effect is on, the Effect Indicator for the selected effect is lit. IHU / (HU1): Humanizer 1] This creates a unique effect that periodically switches between the two vowels produced by the Humanizer. The effect will be more obvious if used together with Overdrive/Distortion/Fuzz. [ HUE (HU2): Humanizer 2] "Vowel 1" and "Vowel 2" will be alternately selected each time you pick the bass gu itar. "RATE" determines the timing of the vowels changes. [ E *7 (Eq): Equalizer] This is a 3-band equalizer that controls the tone of each frequency band. The Treble and Middle provide a parametric equalizer that allows you to adjust the center frequency. < HUMANIZER > VOWEL-1 (a, e, i, o, u) This selects the first vowel. VOWEL-2 (a, e, i,o, u) This selects the second vowel. RATE (0 - 100,4br, 2br, 1 br, t-1 -1-9) This sets the cycle to change two vowels. * Regarding the Tempo Rate (4br, 2br, Ibr, t-1 - t-9), refer to "Changing the Delay Time or Rate during live performance — Tempo Delay / Tempo Rate" (Page 16). 23 DEPTH (0-100) This adjusts the articulation of the vowel. Increasing the value will make the vowel sound more clearly. D.LEVEL (Direct Level) (0-100) This adjusts the volume of the direct sound. < EQUALIZER > HIGH.f (High Frequency) (125 Hz - 10.0 kHz) This sets the center frequency for controlling the level of treble. The display will show the following: 155 - BDO '■ 125 Hz- 800 Hz 10 - I0.D ■ 1.0 kHz-10.0 kHz * Setting this to 6.3 to 10.0 kHz will create a shelving type. HIGH (High Level) (-18- 18) This controls the level of the treble. Setting it higher than zero will boost the band selected with "HIGH.f," while setting it lower than zero will cut it. MID.f (Middle Frequency) (50 Hz - 4.0 kHz) This sets the center frequency for adjusting the level of the middle. The display will show the following: 50-000: 50 Hz-800 Hz ID-HO- 1.0 kHz-4.0 kHz MID (Middle Level) (-18-18) This controls the level of the middle. Setting it higher than zero will boost the band selected with "MID.f," while setting it lower than zero will cut it. LOW (Low Level) (-18-18) This controls the level of the bass. Setting it higher than zero will boost the bass, while setting it lower than zero will cut it. TOTAL (Total Level) (-18-18) This controls the volume when the Equalizer is turned on. Use this to adjust the volume balance when switching the Equalizer on and off. SYNTH BASS/TWAH WAVE/START NOISE/STOP PWM/DECAY SENS/HESO LEVEL_ D.LEVEL This effect provides two types of synthesizer basses that produce sound using two different methods, and a "T wah" that can create an auto-wah effect. WAVE (1 -10) This adjusts an effect type. You can select one of the two synthesizer basses or T wah mode. When the effect is on, the Effect Indicator for the relevant effect is lit. 1-4: Internal Sound Mode This mode detects the pitch and attack from the input bass guitar sound and creates sound using the internal sound source. Depending on the number selected, the output sound of the internal sound source will differ as follows: 1: /1/1 (sawtooth wave): A sound with a sharpened wave edge is output. 2: A sawtooth wave one octave lower than "1" is output. 3: rLTTJ (square wave): A sound softer than Wave "1" is output. 4: A square wave one octave lower than "3" is output. * The above function will not work properly if you play chords. So, have all the other strings muted, and play the bass guitar using single notes. * To play the next note while the previous note is still sounding, be sure to mute the previous note completely, then play with a distinct attack. * When this unit cannot detect the attack, it may not sound correctly. 5-9: Wave Shape Mode This mode directly shape the input wave of the bass guitar into a synthesizer bass sound. Depending on the number selected, the character of the sound will differ. 10: T wah is an effect whereby the cutoff frequencies of the filter change automatically as the volume of the bass guitar changes. 24 (When you select 1 -4: Internal Sound Mode) NOISE (0-100) This adjusts the noise level to add to the sound in the internal sound source. By adding some noise, you can create the special atmosphere of a synthesizer bass. PWM (Pulse Wise Modulation) (0 - 7) When you have selected "3" or "4" in "WAVE," this parameter can be effectively used. By modulating the wave in the internal sound source, you can add spaciousness or richness to the sound. By increasing the value, the modulation will be deepened. When it is set to zero, no PWM effect will be obtained. SENS (Sensitivity) (0-100) This adjus...