Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
Otherwise, you will need to use equivalent packaging materials. • Use a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions. • Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable. 5 Panel Descriptions O V-DRUMS Input Jack Connect the percussion sound module to this jack. * Provides tonal quality perfectly matched to Roland's "V-Drums" percussion sound modules. o LINE Input Jack You can connect a CD player or other kind of device and have it play along with your drums. * Provides tonal quality suited to Hi-Fi audio. O V-DRUMS Input Jack / G UNE Input Jack This instrument is equipped with stereo phone type jacks, and accepts both mono sq and stereo. Make connections after first checking the wiring diagrams of other equipment you intend to connect. This accepts 1/4" stereo phone plug. However, the speaker is mono. OGND 0 V-DRUMS VOLUME KNOB This adjusts the volume of the device connected to the V-DRUMS Input Jack. O LINE VOLUME KNOB This adjusts the volume of the device connected to the LINE Input Jack. 0 BASS KNOB Adjusts the level of the Low frequency. 0 TREBLE KNOB Adjusts the level of the High frequency. Q POWER SWITCH This switch turns the power on/off. When the power is on, the indicator will be lit. 0 AC INLET Connect the included Power cord here. Plug it firmly in, so that the cable does not accidentally become disconnected. The input sensitivity of the PM-10 has been set sotnezohat high, to allozo use with percussion sound modules having relatwely loiv output levels. But if you connect a sound module with a high output lez’d (such as the TD series), distortion may occur if you turn the volume level up too much. Be careful. AC IN 6 [ Connections/Turning On the Power Connections VOLUME 0) 0S) 0 to D tSJ ly-mHIMSl UNE STEREO MINIATURE PHONETYPE •— STEREO 1«“ PHONETYPE OUTPUT L (MONO) I UN£ 0UT __g HEADPHC HEADPHONES OUT ■nflURZXID PHONES Roland .................. / '\ f-j—H v / oV CD Player Percussion Sound Module Tn prevent malfunction and/ or damage to speakers or other devices, always lum down the volume, and turn off the power on all devices before making any connections. NbYjE When connection cables with resistors are used, the volume level of equipment connected to the INPUT may be low. If this happens, use connection cables that do not contain resistors, such as those from the Roland PCS series. * Once the connections have been completed, turn on pou’cr to your various devices in the order specified. By funnily oh devices in the wrong order, you risk causing malfunction and/or damage to speakers and other tiro ices. Turning On the Power 1 2 Make sure that all volume controls on the PM-10 and connected devices are set to “0.” Turn on the devices connected to the V-DRUMS Input Jack and LINE Input Jack. Turn on the PM-10's POWER switch. Always make sure to Im’e the volume level turned down before switching on power. Even with the volume all the way down, you may still hear some sound when the power is switched on, but this is normal, and does not indicate a malfunction. Adjust the volume levels for the devices. This unit is equipped with a protection circuit. A brief interval fa few seconds) after power up is required before the unit will operate normally. If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the power outlet. Refer to Power Supply (p. 5). 7 Important Notes on Placement • When this unit is in operation, the top side will become hot. Take care not to touch it. • Do not put anything on the unit. • Do not place the monitor on its side or upside down. • During operation, this unit must be placed at a distance of no less than 20 cm (7-7/8 inches) from any walls. no less than 20 cm (7-7/8 inches) (7-7/8 inches) * Phase also refer to “Placement" in IMPORTANT NOTES (p. 5). Main Specifications Rated Power Output 30 W Nominal input Level / input Impedance V-DRUMS Input: 0 dBu/20 k ohms LINE Input: 0 dBu/20 k ohms Speakers 10" (250 mm) Woofer + 3” (77 mm) Tweeter (Coaxial, 2-way) Enclosure Bass-reflex type Controls V-DRUMS Volume Knob LINE Volume Knob BASS Knob TREBLE Knob POWER SW Indicator POWER Connectors V-DRUMS Input Jack (Stereo 1/4" phone type) LINE Input Jack (Stereo 1/4” phone type) Power Supply AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz) Power Consumption 36 w Dimensions 364 (W) x 396 (D) x 352 (H) mm 14-3/8 (W) x 15-5/8 (D) x 13-7/8 (H) inches Weight 12 kg / 26 lbs 8 oz Accessories Owner's Manual ' Power Cord * 0 dBu = 0.775 Vrms * In the interest of product improvement, the specifications ami/or appearance of this uni...