Log:
Évaluations - 2, GPA: 4 ( )

Instructions Roland, Modèle RE-1000

Fabricant : Roland
Taille : 613.3 kb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


Do not use this unit in the vicinity of such receivers. ■ FEATURES • 16-bit digital processing assures high-quality sound. • Provides an abundant selection from 16 types of effects, including simple echoes or multi-echoes, as well as those combined with reverb. • An Input Gain knob widens your possibilities -microphones, musical instruments, and many other devices can be used. • For input, an onboard two-channel mixer allows you to have two devices, such as a microphone and musical instrument, connected simultaneously. • A Warmth knob facilitates creation of echo effects that pulsate, and have more warmth. ® A truly expansive echo is provided from the Stereo Out jacks. ® Full control over the tone of the effected sound is furnished by means of the Pre-Equalizer. Maintenance • For everyday cleaning wipe the unit with a soft, dry cloth (or one that has been slightly dampened with water). To remove stubborn dirt, use a mild neutral detergent. Afterwards, be sure to wipe the unit thoroughly with a soft, dry cloth. • Never use benzene, thinners, alcohol or solvents of any kind, to avoid the risk of discoloration and/or deformation. Additional Precautions • Protect the unit from strong impact. • A small amount of heat will radiate from the unit, and thus should be considered normal. • Before using the unit in a foreign country, consult with qualified service personnel. Power Supply Placement ((Rear Pane!)} Ф Jtk. Âk ATTENTION ¡ ntsouc oe ci © Output Jacks A (MONO), B These jacks provide output of the effected and the direct sound signals. * Connection should be made to the A (MONO) jack if monaural output is desired. ■ MAKING CONNECTIONS □ Example Setup 1: Using microphone, keyboard, electric guitar, etc. Microphone Keyboard Electric guitar О INPUT(FRONT) |f00SlsO OUTPUT о Mixer □ Example Setup 2: Connecting with a mixer's send/returns OUTPUT Mixer SEND RETURN 0 Û INPUT OUTPUT ' “00©* é © »чйр"® ®s=o: Q ©_- -D~- - - - - - -_;_° ® о О INPUT Power amp * When setup so that connections are made to Send/Return, set the Output Balance Knob 0 so it is turned fully clockwise. ■ OPERATION 0 Once all connections have been made, set all panel knobs so they are in the positions shown in the illustration below: (2) Adjust the input level for each channel using Input Gain Knobs 1 & 2 ©. Adjust them so you don't cause the Overload Indicators © to light up. ® Select the type of effect desired using the Mode Switch ©. Refer to the "Mode Chart," page 6, for explanation of the settings pertaining to each Mode. * Although a certain amount of noise may be produced when a change in the Mode is made, there is no need for concern. (D Use the Output Balance Knob © to adjust the volume balance of the Direct sound versus the Effected sound. ©Adjust the quality of the effected sound using the Pre-Equalizer Knobs © © ® Use the Warmth Knob © to adjust the "pulsation" of the effected sound. 0 Use the Decay Knob © to set the number of repetitions in the effected sound and the reverberation time. The function obtained varies depending on the Mode Switch © setting. For further details, refer to the "Mode Chart," page 6. ■ MODE CHART MODE EXPLANATION DECAY KNOB ECHO 1 Provides a standard echo effect. Sets the number of repetitions in the echo. ECHO 2 ECHO 3 ECHO 4 MULTI ECHO 1 Provides a deeper, spacious echo effect. Sets the number of repetitions in the echo. MULTI ECHO 2 MULTI ECHO 3 MULTI ECHO 4 ECHO & REV 1 Reverberation is added to a single echo to provide an effect with much more breadth. Sets the number of repetitions in the echo, and the reverberation time. ECHO & REV 2 ECHO & REV 3 ECHO & REV 4 REV 1 (Room type) Provides a natural reverb effect. Sets the reverberation time. REV 2 (Hall type) REV 3 (Plate type) SPECIAL Provides an echo effect timed at a specialized interval. Adjusts the pattern of the echo. ■ SPECIFICATIONS • Input Level/Input Impedance: +4dBm/150kO to'-52dBm/2kft (Nominal) + 19dBm (Max) • Output Level/Output impedance -20dBm/1.5ka • Output Load Impedance More than 10ki2 • Frequency Response Direct: 20Hz to 20kHz (+1, -3dB) Effect: 30Hz to 10kHz (+1, -3dB) • Sampling Frequency 31.25kHz • Sampling System 16-bit Linear • Residual Noise Less than —96dBm (IHF-A) • Control input Gain 1, 2 Output Balance Pre Equalizer-High Pre Equalizer-Low Decay Time Warmth • Switch Mode (16 Mode) Power (On/Off) • Indicator Power Overload 1, 2 • Jacks Input 1, 2 Output A (MONO), B • Power AC120, 220, 240V • Power Consumption 6.5W • Dimensions 482(W)x44(H)x208(D)mm/19"x1-13/16"x8-1/4" • Weight: 2.5kg 5lb 9oz * Specifications are subject to change without notice. ---For West Germany — Bescheinigung des Herstellers/Importeurs Hiermit wird bescheinigt, daß der/die/das in Übereinstimmung mit den Bestimmungen der digital multi echo RE-1000 Amtsbl. Vfg 1046/1984 (Gerät. Typ. Bezeichnung) (Amtsblattverfügung) funk-en...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories