Évaluations - 4, GPA: 3.5 ( )

Fabricant : Roland Taille : 144.5 kb Nom Fichier : Langue d'enseignement:

The Level Control serves to minimize the volume difference between the normal and tne effect sounds. Moreover, the RGE-10 provides both standard phone and pin jacks for input and output. The RGE-10 is one of the BOSS Micro Rack Series, and by using a rack mount adaptor RAD-10, any two of the Series can be mounted in a standard 19” rack (E1A-1U). • Please read the instructions carefully. CONNECTIONS AC Adaptor SCSSPSA 120,220 or 240 7c AC Adaptor jack 'I lüîJ To another Boss Micro Ro;k Series ¡1 i! effk: "Co: Sw’tc*! ¡FS-1 Opriori ya OU *UT S.ÉK®. IMMT OPERATION 1 Set all the Equalizer Controls and the Level Control to OdS, and turn the Effect Switch off. 2. Switch the RGE-10 on, (Make sure that the Power Indicator lights up.) Now, the unit is in the normai mode. (Sound without filtered by the equalizer is obtainned.) 3 Set the Level Selector Switch to either position depending on the type of the device you use. • If it is the noise that you wish to avoid more than anything, set the switch tc ~20d8m, If you are anoyed by distortion, set it to -10dBm. ooflfjioo Pre Mam Arrvp-.ilier Guitar Amplifier 0GÛJPOÛ ÉToCjcI Тазе fleccder Guitar Eiectnc Keybcara Tape Recader Vicec Cassette Recoder CD Player VitSeo Disc Player тчмиид; FM/'TV Tüner Oesigneci for icw nciss, RGE-10 cart also be included in AV system for tailoring acoustical environment to scenes. • When you use oniy an AC adaptor for supplying power to more than one unit, please be sure that the total current draw does not exceed 20nmA. (The current draw of each unit is shown on its rear panel.) 4 Turn the Effect Switch on. Now, the unit is in the equalizer mode. 5 Connect a fcotswitch to the Effect Remote Jack. Now, you can turn the unit to the equalizer or normal mode just by depressing the peda'. • If the Effect Switch on the front pane! has been turned off, above remote control function cannot be obtained. Try moving each Equaiizer Control to see how it affects the tone color, then make your own sounds. NOTE The RGE-10 is a low-ncise equaiizer itself, but note that raising the slider will emphasize the noise generated by the connected device. PANEL DESCRIPTIONS ® 0 EFFECT INDICATOR This lights up when the RGE-10 is in the equalizer mode. So you can easily see whether it is now in the norma! or equalizer node. 0 EFFECT SWITCH Each time you push this switch, the unit selects the eausi-izer or normal mode. 0 EQUALIZER CONTROLS 10 band sliders of 31 Hz to 16kHz are provided in an octave step, and each slider allows the level control within the range of ±12dB. Also, the sliders feature center-ciicks and LED’s for accurate and fast "OdB" level settings. 0 LEVEL CONTROL Tne Level Control serves to minimize the volume difference between the normal and the effect sounds, Set this to an appropriate position to avoid volume decrease or increase caused by changing from norma! to equalizer'mods. This control allows level control within me range of ±12dB and features center-click 3nd an LED. © POWER INDICATOR This indicator lights up when the unit is switched on. 0 POWER SWITCH The unit is turned on by pressing this switch, The Power Indicator and all the indicators on the panei will light up. o INPUT JACKS To this jack, connect an electric guitar, electronic musical instrument, tape recorder etc. • The standard phone jack and the pin jack da not work at a time. When both are used at the same time, the standard phone will have priority. 0 LEVEL SWITCH Select either position depending on the type of the device you use, Usually, when an electric guitar or electronic musical instrument is used, set this switch to "-20dSm”, and when audio equipment is used, set it to ''-IQdBm''. 0 OUTPUT JACKS Connect this to a guitar amplifier, tape recorder etc. Both standard phone and pin jacks work simultaneously. ® EFFECT REMOTE JACK By connecting an options! footswitch FS-1 to this jack, you can turn the unit to the Effect On 1= equalizer mode) or to the Effect Off {= norma! mode) without reaching out your hand. • When the Effect Switch on the front pane! is turned off, the footswitch does not work. $ AC ADAPTOR JACK Usually, connect the AC adaptor (BOSS PSA-120, 220 or 2401 to "IN". However, for supplying power to other BOSS Micro Rack Series, connect the supplied DC cord to "OUT". EQUALIZER CONTROLS 31Hz This is the lowest band of all, and may be cut end used as a subsonic filter, as it cannot be played back by a small speaker. When, however, a large speaker is provided, you may boost this band to obtain reverberation effect. 62Hz By cutting this band, hum noise can be removed, therefore dear sound is obtained. You may boost it to emphasize bass drum and make heavy and stable sound. 125Hz This band may be boosted to emphasize the bass guitar sound. 250Hz This can be boosted to make a fat strings sound. By cutting this, however, ciear bass sounds are obtained. 500Hz This is t...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :