Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
Please install OMS or FreeMIDI. Windows XP/2000 displays a “Hardware Installation” or “Digital Signature Not Found” dialog box Windows XP/2000 displays a “Hardware Installation” or “Digital Signature Not Found” dialog box In order to install/re-install the driver, you must make the settings described in “Driver Signing Options” (p. 12). You are asked to install the driver file even though you installed the driver (Windows) Did you connect the UM-2EX to a different USB connector than the one you used when installing the driver? If your computer or USB hub has two or more USB connectors, and you connect the UM-2EX to a different USB connector, you may be asked for the driver file even though the driver has already been installed in your computer. (Such a response does not indicate a malfunction.) Proceed as follows to install the driver. 1. Connect the UM-2EX to the computer. Windows XP: 1. The Found New Hardware Wizard dialog box will appear. If the message “Connect to Windows Update to search for software?” appears, choose “No” and then click [Next]. 2. Choose “Search for the best driver in these locations” and click [Next]. If a dialog box with an “!” or “x” symbol will appear, click [Continue Anyway] to proceed with the installation. If you are unable to continue, click [OK] and repeat the driver installation. (.“Installing the Driver” (p. 12)) Windows 2000: If a dialog box indicating “Digital Signature Not Found” will appear, click [Yes] to proceed with the installation. If you are unable to continue, click [OK] and repeat the driver installation. (.“Installing the Driver” (p. 12)) 2. The Completing the Found New Hardware Wizard dialog box will appear. Click [Finish]. 3. If the Change System Settings dialog box appears, click [Yes]. Windows will restart automatically. If you are unable to complete driver installation using the above method, repeat the driver installation. (.“Installing the Driver” (p. 12)) “Find new hardware wizard” does not execute automatically “Find new hardware wizard” ends before the process is completed “Found unknown device” appears even though you installed the driver (Windows) “Find new hardware wizard” does not execute automatically “Find new hardware wizard” ends before the process is completed “Found unknown device” appears even though you installed the driver (Windows) Make sure that the UM-2EX’s USB cable and your computer are correctly connected. It may take about 15seconds (or more) after the USB cable is connected. Does your computer or USB hub have sufficient power supply capacity? The UM-2EX cannot be connected if insufficient power is supplied to it. Check whether one of the following cases apply. • If you are using the UM-2EX with a notebook computer that is running on its battery, operation may be unreliable with some models of computer. If this is the case, connect the AC adaptor to your notebook computer. • The power conservation mode of your computer may limit the power that is supplied to USB. Check the settings of your computer. • In some cases, the UM-2EX cannot be used with a bus-powered hub (a hub that does not contain a power supply). Please use a self-powered hub (a hub that contains a power supply). Is USB enabled on your computer? Refer to the operation manual for your computer, and make sure that USB is enabled. Does your computer meet the USB specifications? If you are using a computer that does not fulfill the electrical requirements of the USB specifications, operation may be unstable. In this case, you may be able to solve the problem by connecting a USB hub. UM-2EX is not detected when making OMS or FreeMIDI settings (Mac OS 9 users) UM-2EX is not detected when making OMS or FreeMIDI settings (Mac OS 9 users) • Reconnect the UM-2EX. • If other USB devices are connected, connect only the UM-2EX. • It is possible that the Macintosh did not correctly detect and initialize the UM-2EX. Leave the UM-2EX connected, and restart your Macintosh. If it is still not detected, shut down your Macintosh, and then restart it. • In some cases, the UM-2EX will not be detected if you have connected it to the USB connector located on the keyboard of the Macintosh. Please connect it to a USB connector on the Macintosh itself. Deleting the Driver Deleting the Driver Windows users 1. Start up Windows with the UM-2EX disconnected. Disconnect all USB cables other than a USB keyboard or USB mouse. * If you are using Windows XP Professional/2000, log on as a user that has administrative privileges (e.g., Administrator). 2. Insert the CD-ROM into the CD-ROM drive of your computer. 3. From the Windows Start menu, choose “Run....” In the Run dialog box, input the following into the Open field, and click [OK]. Windows XP/2000 users: D:\Driver\XP2k\Uninstal.exe Windows Me/98 users: D:\Driver\Me98\Uninstal.exe * The drive name is “D:” in the example shown here, but may be different on your system. Use the drive name for your CD-ROM drive. 4. Follow the on-screen instructions to un...