Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
Receive Data ■ Channel Voice Messages • Note Off status 8nH 9nH 2nd byte kkH kkH n = MIDI channel number: kk = Note number: vv = Note Off velocity: 3rd byte vvH 00H OH-FH (ch.1-ch.16) 00H-7FH (0-127) 00H-7FH (0-127) * This is not received if the part and note number that receives this message has a Trigger Mode setting of TRIGGER or DRUM. • Note On status 9nH 2nd byte kkH n = MIDI channel number: kk = note number: vv = Note On velocity: 3rd byte vvH OH-FH (ch.1-ch.16) 00H-7FH (0-127) 01H-7FH (1-127) If the sample assigned to the part and note number that receives this message has a Trigger Mode setting of TRIGGER, and if that note is sounding, this will function as note-off. • Polyphonic Aftertouch status AnH 2nd byte kkH n = MIDI channel number: kk = note number: vv = Polyphonic Aftertouch: 3rd byte vvH OH-FH (ch.1-ch.16) 00H-7FH (0-127) 00H-7FH (0-127) * When received on the control channel, this will affect all parts. * Control Change * Not received when the Receive switch (SYSTEM/MIDI/RX SW) is OFF. * If this is received on the control channel (SYSTEM/MIDI/GENERAL), the effect will apply to all parts, unless otherwise noted for each item. Q Modulation (Controller number 1) status 2nd byte 3rd byte n = MIDI channel number: vv = Modulation depth: OH-FH (ch.1-ch.16) 00H-7FH (0-127) Q Portamento Time (Controller number 5) status 2nd byte 3rd byte BnH 05H vvH n = MIDI channel number: vv = Portamento Time: OH-FH (ch.1-ch.16) 00H-7FH (0-127) * This will affect the Portamento Time parameter of the sample assigned to the part that receives the message. * Not received on the Control channel. Q Data Entry (Controller number 6, 38) status 2nd byte 3rd byte BnH BnH 06H 26H mmH llH n = MIDI channel number: 0H-FH (ch.1-ch.16) mm,ll = the value of the parameter specified by RPN/NRPN mm = MSB, ll = LSB * Not received on the Control channel. Q Volume (Controller number 7) status 2nd byte BnH 07H n = MIDI channel number: vv = Volume: 3rd byte vvH OH-FH (ch.1-ch.16) 00H-7FH (0-127) Q Panpot (Controller number 10) status BnH 2nd byte 0AH n = MIDI channel number: vv = Panpot: 3rd byte vvH OH-FH (ch.1-ch.16) 00H-40H-7FH (0-64-127) * Adjust the stereo location over 128 steps, where 0 is far left, 64 is center, and 127 is far right. Q Expression (Controller number 11) status 2nd byte 3rd byte BnH 0BH vvH n = MIDI channel number: vv = Expression: Q Hold 1 (Controller number 64) status 2nd byte BnH 40H OH-FH (ch.1-ch.16) 00H-7FH (0-127) n = MIDI channel number: vv = Control value: 3rd byte vvH OH-FH (ch.1-ch.16) 00H-7FH (0-127), 0-63 = OFF, 64-127 = ON Q Portamento (Controller number 65) status 2nd byte 3rd byte BnH 41H vvH n = MIDI channel number: vv = Control value: OH-FH (ch.1-ch.16) 00H-7FH (0-127), 0-63 = OFF, 64-127 = ON * This will change the Portamento Sw parameter setting of the sample assigned to the part that receives this. * Not received on the Control channel. Q Hold 2 (Controller number 69) status BnH 2nd byte 45H n = MIDI channel number: vv = Control value: 3rd byte vvH OH-FH (ch.1-ch.16) 00H-7FH (0-127), 0-63 = OFF, 64-127 = ON Q Portamento Control (Controller number 84) status 2nd byte 3rd byte BnH 54H kkH n = MIDI channel number: kk = Source note number: OH-FH (ch.1-ch.16) 00H-7FH (0-127) * A Note On message received immediately after a Portamento control will be sounded with the pitch changing smoothly from the source note number. If a voice is already sounding at the same note number as the source note number, that voice will change pitch to the pitch of the newly received Note On, and continue sounding (i.e., will be played legato). * The speed of pitch change produced by portamento control will depend on the setting of the Portamento Time parameter of the sample assigned to the part that receives this. * Not received on the Control channel. Q Effect 1 (Reverb Send Level) (Controller number 91) (Controller number 91) status 2nd byte 3rd byte BnH 5BH vvH n = MIDI channel number: vv = Reverb Send Level: OH-FH (ch.1-ch.16) 00H-7FH (0-127) * The Reverb Send Level parameter will change. * Not received on the Control channel. Q Effect 3 (Chorus Send Level) (Controller number 93) (Controller number 93) status 2nd byte 3rd byte BnH 5DH n = MIDI channel number: vv = Chorus Send Level: vvH OH-FH (ch.1-ch.16) 00H-7FH (0-127) * The Chorus Send Level parameter will change. * Not received on the Control channel. BnH 01H vvH 169 MIDI Implementation Q RPN MSB/LSB (Controller number 100, 101) status 2nd byte 3rd byte BnH 65H mmH BnH 64H llH n = MIDI channel number: 0H-FH (ch.1-ch.16) mm = MSB of the parameter number specified by RPN ll = LSB of the parameter number specified by RPN * Not received on the Control channel. <<< RPN >>> Control Changes include RPN (Registered Parameter Numbers), which are extended parameters whose function is defined in the MIDI specification. When using RPNs, ...