Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
Follow the steps described below to initialize the card. * Please be aware that initializing a Memory Card causes any data previously saved on the card to be lost. 5-1. Press [FI] (WRITE). The VG-8 automatically detects that the Memory Card has not been initialized for use with the VG-8, and the message "Format This Card. Are You Sure?" appears on the display. 5-2. If you want to go ahead with initializing the card, press [FI] (OK). If you want to abandon initialization, press [F5] (CANCEL). Once the card has been initialized correctly, the message "Completed" appears on the display. The Patch is automatically saved on the Memory Card when initialization ends, so there is no need to try to save it again. 5-3. After initialization ends, and the Patch has been saved, press [PLAY] to return to the Play mode. Call up the Patches in CARD to check and make sure that the Patch has been saved. CopyingPalch Parameters and Sysf^ Parameters to a Memory Card Saving Parameters on a Memory Card You can save all 64 of the USER Patches (USER All to USER B84) on a Memory Card (CARD All to CARD B84). You can also save the VG-8's System parameters on the Memory Card. * Any parameters prei’iously saved on the Memory Card are tost at this time. 1. Move the Memory Card's protect switch to "OFF" and insert the card into the MEMORY CARD slot. 2. Press [SYSTEM] to open the System Menu screen. 3. Press [F6] (CARD) to open the Card Transfer screen. 4. Select the function. Move the cursor to "Function" and use the [VALUE] dial to select "Save VG-8 to CARD." 5. Select the target. Move the cursor to "Target" and use the [VALUE] dial to select the type of parameters to save on the Memory Card. 41 Chapter 4 Advanced Patch Creation All Patches All Patch parameters are saved. System System parameters are saved. Patches & System All Patch parameters and System parameters are saved. 6. Press [FI] (XFER). The message "Are you sure?" appears, asking you to confirm that you really want to save the data. 7. To save the data, press [FI] (OK). If you want to cancel the saving operation, press [F5] (CANCEL). Once the selected parameters have been saved correctly, the message "Completed" appears on the display. 8. After the saving operation is completed, press [PLAY] to return to the Play mode. Call up the Patches in CARD to check and make sure that the Patches have been saved correctly. Using an Unused Memory Card with the VG-8 If you have inserted a Memory Card that has never been used with the VG-8, a warning message appears when you get to step 6 above, telling you that the Memory Card is not for use with the VG-8. Follow the steps described below to initialize the card. * Please be aware that initializing a Memory Card causes any data previously saved on the card to be lost. 6-1. Press [FI] (XFER). The VG-8 automatically detects that the Memory Card has not been initialized for use with the VG-8, and the message "Format This Card. Are You Sure?" appears on the display. 6-2. If you want to go ahead with initializing the card, press [FI] (OK). If you want to abandon initialization, press [F5] (CANCEL). Once the card has been initialized correctly, the message "Completed" appears on the display. The selected parameters are automatically saved on the Memory Card when initialization ends, so there is no need to try to save them again. 6-3. After initialization ends, and the Patch has been saved, press [PLAY] to return to the Play mode. Call up the Patches in CARD to make sure they have been saved correctly. Copying Patch Parameters and System Parameters from a Memory Card Copying Parameters from a Memory You can copy as many as all 64 of the Patches saved on a Memory Card (CARD All to CARD B84) to the USER (USER All to USER B84). You can also copy System parameters saved on the Memory Card to the VG-8. * Any parameters already saved in the VG-8 are overwritten by the copied parameters and are lost. 1. Correctly insert the Memory Card into the MEMORY CARD slot. 2. Press [SYSTEM] to open the System Menu screen. 3. Press [F6] (CARD) to open the Card Transfer screen. 4. Select the function. Move the cursor to "Function" and use the [VALUE] dial to select "Load CARD to VG-8." 5. Select the target. Move the cursor to "Target" and use the [VALUE] dial to select the type of parameters to copy to the VG-8 from the Memory Card. All Patches All Patch parameters are copied. System 42 Chapter 4 Advanced Patch Creation System parameters are copied. Patches & System All Patch parameters and System parameters are copied. 6. Press [FI] (XFER). The message "Are you sure?" appears, asking you to confirm that you really want to copy the data. * If a Memory Card that has never before been used xuith the VG-8 has been inserted, the VG-8 automatically detects that the Memory Card has not been initialized for use with the VG-8, and the warning message “Format This Card. Are You Sure?" appears on the display. I...