Évaluations - 4, GPA: 4
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Please be aware of this before using polish. 20 ¦ Alto Horn Bell ¦ Baritone Mouthpiece Mouthpiece Receiver Leadpipe 1st Valve 2nd Valve 3rd Valve 1st Valve Slide Main Tuning Slide Water Key Valve Casing 3rd Valve Slide Cap Cap The 4th piston on the YBH-621 is a side action type. (This is not a compensating instrument.) Nomenclature Bell Mouthpiece Mouthpiece Receiver Leadpipe 1st Valve 2nd Valve 3rd Valve 1st Valve Slide 2nd Valve Slide Main Tuning Slide 3rd Valve Slide Valve Casing Water Key Cap Cap 21 ¦ Euphonium ¦ Top Action Valves Tuba Bell Bell Mouthpiece Mouthpiece Mouthpiece Receiver Mouthpiece Receiver Leadpipe Leadpipe 1st Valve 1st Valve 2nd Valve 2nd Valve 3rd Valve 3rd Valve 1st Valve Slide 1st Valve Slide 2nd Valve Slide 2nd Valve Slide Main Tuning Slide Main Tuning Slide 3rd Valve Slide 3rd Valve Slide Valve Casing Valve Casing Water Key Water Key Cap Cap Cap 4th Valve 4th Valve Nomenclature 22 ¦ Rotary Tuba Bell Leadpipe 1st Valve Slide 2nd Valve Slide Main Tuning Slide Water Key 4th Valve 3rd Valve 2nd Valve 1st Valve 4th Valve Slide 1st Rotary Valve 2nd Rotary Valve 3rd Rotary Valve 4th Rotary Valve Mouthpiece 5th valve pitch (amount pitch lowered) YFB-621 YFB-822 YCB-822 YCB-861 Export model w/o sleeve 2/3 4/3 2/3 4/3 w/sleeve 4/3 - 4/3 - ¦ Front Action Valves Tuba Mouthpiece Leadpipe Bell Water Key Main Tuning Slide 4th Valve 3rd Valve 2nd Valve 1st Valve 5th Rotary Valve 3rd Valve Slide 1st Valve Slide 5th Valve Slide Nomenclature 23 ¦ Sousaphone Bell Mouthpiece Leadpipe 1st Valve 2nd Valve 3rd Valve 1st Valve Slide Main Tuning Slide 3rd Valve Slide Water Key Cap * Specifications and/or design may change for reasons of improvement without notice. Bit Nomenclature ¦ Marching Tuba 1st Valve Slide 2nd Valve Slide 1st Valve 2nd Valve 3rd Valve Leadpipe Mouthpiece 3rd Valve Slide Water Key Main Tuning Slide 24 Handling the Instrument The instrument is made with thin metal so please handle it with care. Do not apply any excessive force, or bump it in a manner that will dent or damage the instrument. ¦ Applying Oil Apply oil to the pistons 1. Unscrew the valve cap and pull the piston straight out of the valve casing until about half of the valve piston is exposed. 2. Apply about 10 drops of valve oil on the piston. * Do not apply too much oil. 3. Slowly return the piston into the valve casing. At this time, make sure the valve guide fits into the slot inside the valve casing. After the valve cap is tightened firmly, move the piston up and down a few times to evenly distribute the oil over the piston. * Each piston fits into its corresponding casing. Make sure the number stamped on the piston matches the number stamped on the casing before returning the piston into the valve casing. * The pistons must be oiled to function properly and smoothly. Applying oil to the rotors (Rotary Tuba Only) 1. Remove the valve cap and apply some rotor spindle oil to the spindle and in the center of the rotor. 2. Apply some rotor spindle oil to the roto...
Ce manuel est également adapté pour les modèles :Instruments de musique - YBB-105 (9.73 mb)
Instruments de musique - YBB-105S (9.73 mb)
Instruments de musique - YBB-201 (9.73 mb)
Instruments de musique - YBB-201S (9.73 mb)