Évaluations - 4, GPA: 3.8 ( )

Fabricant : Yamaha Taille : 911.8 kb Nom Fichier : Langue d'enseignement:

Par ce dispositif a également d'autres instructions :

Instruments de musique - DTX560K (661.32 kb)

Instruments de musique - DTX560K (36.78 kb)

Instruments de musique - DTX560K (3.99 mb)

Instruments de musique - DTX560K (3.48 mb)

(A value of “1” is the “loosest” snares setting.) * When you change this setting, the decay setting (KIT6) for the input sources “.snare” and “.snrOp” also changes. DTX500 Owner’s Manual 31 7 Create Your Own Original Drum Kit KIT24*PC Ch1=on ”PC003 M000L003‚ Program Change Number Transmit On/Off Bank Select LSB 7 Create Your Own Original Drum Kit KIT24*PC Ch1=on ”PC003 M000L003‚ Program Change Number Transmit On/Off Bank Select LSB Bank Select MSB 24 Set the Program Change and Bank Select When a Drum Kit is selected, this function sets the MIDI Program Change Number and the Bank Select MSB and LSB that will be transmitted. This can be set for each MIDI channel. By transmitting a program change message, you can have the voice of an external MIDI device automatically change when switching the Drum Kit on the DTX500. * The ./¶ indication is not shown in the upper right corner of the display. Use the [>] button to call up the KIT24 page, then rotate the jog dial to make the following settings. Program Change MIDI Channel * When the Program Change Transmit On/Off is set to “off,” values for PC, M and L will be “---” and the settings cannot be made. . MIDI Channel 1–16............... Target MIDI channel for the Program Change . Program Change Transmit On/Off on................... Transmits. off................. Does not transmit. . Program Change Number 001–128....... Transmitted program change number. . Bank Select MSB, LSB 000–127....... Bank select MSB number, LSB number *For more information on Bank Select MSB and LSB, refer to the Voice List and MIDI Data Format documents, etc. of the particular external MIDI device you are using. 25 Set MIDI Volume and Pan—Control Change This function sets the MIDI Control Change Volume and Pan values that will be transmitted when a Drum Kit is selected. This can be set independently for each MIDI channel. This lets you automatically change the voice Volume and Pan on an external MIDI device when you switch the Drum Kit of the DTX500. * The ./¶ indication is not shown in the upper right corner of the display. Use the [>] button to call up the KIT25 page, then rotate the jog dial to make the following settings. Control Change MIDI Channel KIT25*CC Ch1=on ”Vol=127 Pan= 64 Transmit On/Off Volume Pan * When the Control Change Transmit On/Off is set to “off,” values for Vol and Pan will show “---” and the settings cannot be made. . MIDI Channel 1–16...............Target MIDI channel for Control Change messages . Control Change Transmit On/Off on....................Transmits. off.................Does not transmit. . Volume 0–127.............Sets the Volume Control Change data value that will be transmitted. . Pan 0–127.............Sets the Pan Control Change data value that will be transmitted. 26 Save the Original Voice To save the Drum Voice you created, use the Store operation described below and save it to the DTX500’s memory. Original kits can be saved as a Drum Kit to the User Drum Kit (51–70) memory locations. NOTICE • If you select a different Drum Kit before performing the Store operation, all changes you have made to the data will be lost. If you want to keep settings or changes, make sure to perform the Store operation. 26-1. Press the [SAVE/ENTER] button. The following display will appear. Store destination Edited Drum Kit name KIT save to 51 :[Oak Custom ] 26-2. Rotate the jog dial to select the destination user Drum Kit number (51–70) that you want to store. * Data cannot be stored to the Preset Drum Kits (1–50). *You can save data to a User Drum Kit number that already contains data. However, be careful when doing this, since the previous data will be overwritten with the new data. 32 DTX500 Owner’s Manual 7 Create Your Own Original Drum Kit 7 Create Your Own Original Drum Kit . If you want to change the Drum Kit name, press the [<]/[>] buttons to move the flashing cursor to the character you want to edit, then rotate the jog dial to select a character. A Drum Kit name can contain a maximum of 12 characters, and these can be selected from the following list. space !"#$%&'()*+,-./0123456789:;<=>?@ ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` abcdefghijklmnopqrstuvwxyz{|}.. 26-4. Press the [SAVE/ENTER] button again. A prompt appears asking you to confirm the Store operation. KIT save to 51 Are you sure ? 26-5. Press the [SAVE/ENTER] button once more to actually execute the Store operation. *To cancel the Store operation, press any button except for the [SAVE/ENTER] and [SHIFT] buttons. (When “Are you sure?” appears in the display, the jog dial will also cancel the operation.) When the Store operation is complete, the following display appears. Completed! With this operation, you have now created a Drum Kit that has an original bass Drum Voice. Use the same procedure to create Drum Voices for the other pads (input sources) and create a complete custom Drum Kit of your own. Factory Set This operation returns all of the DTX500’s internal settings back to their original factory defa...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :