Évaluations - 4, GPA: 3.5
(
)
)
|
Par ce dispositif a également d'autres instructions :
Instruments de musique - DTXPRESS II (4.46 mb)
Facilité d'utilisation
• When there is only one parameter on the display, the [SEL<]/ [SEL>] buttons will not operate. Change the setting The setting (value) of flashing parameter on the display can be changed. • The [VALUE–] and [VALUE+] buttons are used to set parameter values. When setting values, press the [VALUE–] button to decrease (minus) the value, press the [VALUE+] button to increase (plus) the value. Holding the button will continue to decrease/increase the value. Hold the [VALUE–] and press the [VALUE+] button will decrease the value by 10. Continue to hold both buttons and the value will continue to decrease. Hold the [VALUE+] button and press the [VALUE–] button to increase the value by 10. Continue to hold both buttons and the value will continue to increase. Drum Kit Play Mode This mode enables you to play the DTXPRESS II drum voices by hitting the pads (or drums with trigger sensors attached) connected to the DTXPRESS II. The DTXPRESS II automatically enters this mode when the power is switched on. You can select and play from 48 preset drum kits and 32 user kits. Also, the drum kit, trigger setup and song specified in this mode will be selected and ready for editing when the Drum Kit Voice Edit, Trigger Setup Edit and Song Edit modes are entered. Entering the Drum Kit Play Mode Press the [DRUMKIT] button on the front panel. Once the Drum Kit Play mode is entered, the Song & Tempo display shown below will appear. KIT .......... 1 Acoustic Kit What’s in the Drum Kit Play Mode The Drum Kit Play mode contains the three setting displays shown below. 1. Drum Kit .................................................. (P. 6) This display is used for selecting the drum kit. Press the [DRUMKIT] button to enter this display. 2. Song & Tempo ........................................ (P. 6) This display is used for selecting the song and setting the song playback tempo. Press the [SONG] button to enter this display. 3. Trigger Setup .......................................... (P. 7) This display is used for selecting the trigger setup. Press the [TRIG] button to enter this display. Press the [SHIFT]+[PAGEt] buttons, in any Drum Kit Play mode display, to jump to the Song & Tempo display with the cursor moved to tempo value. 1. Drum Kit This display is used for selecting the drum kit. KIT .......... 1 Acoustic Kit q w q Velocity Meter The input velocity for trigger inputs 1-10 is displayed using a bar meter in the display. w KIT (Drum Kit) [Range] 1-80 Selects the drum kit. The drum kit number and drum kit name will be displayed. Preset kits are numbered 1-48 and user kits are numbered 49-80. When a pad is hit, the selected drum kit voice will be delivered. Also, this drum kit will be specified for editing when the Drum Kit Voice Edit mode is entered. * Once a setting is changed in the Drum Kit Voice Edit mode, “*” will appear between “KIT” and “=” until the data is stored. * Refer to the [Preset Drum Kit List] (P. 42) 2. Song & Tempo This display is used for selecting the song and setting the song playback tempo. Press the [SHIFT]+[PAGEt] buttons, in any Drum Kit Play mode display, to jump to the following display with the cursor moved to tempo value. SONG .=110 4/4= . 1 HighRise -. r t q w e q q (Tempo) [Range] 30-300, ext Sets the playback tempo for the song. When the DTXPRESS II is controlled by an external sync, “ext” will be displayed. * The external sync setting is found in [4-6. Sync Mode] (P. 34). w Beat [Range] 1/4-8/4, 1/8-16/8, 1/16-16/16 Sets the beat of the song (metronome). e Metronome Note Value [Range] When the beat wis set to 3/8, 6/8, 9/8, 12/8, 15/8, the click tempo will be set to .quarter note, ©eighth note, .sixteenth note. When the beat w is set to any value that is not listed above, the click tempo will be set to .quarter note, .3quarter note (triplet), Drum Kit Play Mode Drum Kit Play Mode r SONG [Range] 1-127 Selects the song. The song number and song name will be displayed. Preset songs are numbered 1-95 and user songs are numbered 96-127. The selected song will playback when the [>/] button is pressed. * When the rhythm mute ([SHIFT]+[PAGEs] is applied, the last letter of the song name will be “.”. * Refer to [About the Song] (P. 8). * Refer to the [Preset Song List] (P. 49). t Repeat Playback [Range] -., »A Sets the repeat playback (repeat continuously from the beginning to the end of the song) of the song. When this parameter is set to “»A”, the song will repeat playback. When this parameter is set to “-.”, the song will playback normally. 3. Trigger Setup This display is used for selecting the trigger. TRIG .......... 1 Medium 1 q w e q Velocity Meter The input velocity for trigger inputs 1-10 is displayed using a bar meter in the display. wTRIG (Trigger Setup) [Range] 1-9 Selects the trigger setup to be used. The trigger number and trigger name will be displayed. Presets are numbered 1-5 and user setups are numbered 6-9. * For more information on the preset trigger setup, refer to the [Trigger Setu...