Évaluations - 2, GPA: 5 ( )

Fabricant : Yamaha Taille : 513.81 kb Nom Fichier : Langue d'enseignement:

For All types Tom Holder Rod Clamp Insert Clamp Bolt NOTE : When attaching the Real Head Pads to a rack system, we recommend that either the YAMAHA Rack System RS100 or RS95 be used. Using a ball clamp type tom holder like the RS100 allows the attachment of large pads like the RHP120. A cylinder type tom holder like the RS95 allows the attachment of lighter pads up to the RHP80. When a large pad such as the RHP100/120 is attached to the RS95, we recommend that the tom holder TPCL100 (optional) be used. The RS60 and RS80 may not provide adequate support for the Real Head Pads. If you already own the RS80 rack (RHP120SD) The snare drum pad can setup on a snare drum stand (YAMAHA: SS642, etc.) in the same manner as a normal snare drum. LEVEL Adjustment Knob LEVEL PAD RIM LEVEL PAD RIM .......... ................ Sensor Location ............ ............ Sensor Location Sensor Location Sensor Location Output Level (LEVEL) Adjustment Use the supplied stereo phone cable to connect the pad’s output jack to the input (SNARE, TOM1, etc.) of the DTXTREME/DTX/DTXPRESS. Connect the cable’s L-shaped plug to the pad. NOTE : The RHP80/100/120/120SD Real Head Pads are dual trigger type electronic drum pads. Both the pad (the drum head section) and the rim (the hoop section around the head that is used for rim shots) are individually equipped with trigger sensors. A separate sound can be assigned to the rim to allow for rim shots *. Connections About Rim Shot Sensitivity The locations of the RHP80/100/120/120SD’s trigger sensors are shown in the illustration. The highest sensitivity can be found in the direct vicinity of the sensor and will decrease as you move away from the sensor. If you are going to use rim shots, we recommend that the area of highest sensitivity be placed in an optimum position when setting up the pad. To Increase the Sound Volume To change the volume of the sound assigned to individual pads when the Real Head Pads are used with the DTXTREME/DTX/DTXPRESS, first adjust the Output LEVEL as described previously, then use the (VOICE) EDIT Mode to set the volume on the DTXTREME/DTX/DTXPRESS. Please refer to the “Owner’s Manual” supplied with your DTXTREME/DTX/DTXPRESS. SPECIAL MESSAGE SECTION NOTICE: Service charges incurred due to a lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer’...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :