Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
Adjust toward the - (minus) direction to raise the position of the OSD, and adjust toward the + (plus) direction to lower it. Choices: -5 to +5 Initial setting: 0 ■ UNIT SET (Unit settings) Use this to change the display unit of measurement. Choices: METERS (Australia, Europe, Asia, and Korea models), FEET (U.S.A. and Canada models) • Select METERS to enter distances in meters. • Select FEET to enter distances in feet. Note If you change this setting, the adjusted sound beam settings may change. 64 En Adjusting the audio balance You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more true-to-life surround sound experience. Using the test tone You can use the test tone feature to output a test tone from each channel to manually balance the channel levels. Use this to set the channel levels so that the volume level of each channel is identical when heard from your listening position. 1 Set the operation mode selector to YSP. 3 Press ^ / ^7 to select the channel you want to adjust. The front panel display changes as follows: TEST FRONT L i E SS L-EnTER TtSl FRONT R t TEST SUR.R t TEST SUR.L t TEST SUBWOOFER ITV/AVI I YSP 1 * 2 Press TEST. “TEST FRONT L” appears in the front panel display and a test tone is output from the front left channel. Note “TEST SUBWOOFER” is only available when SWFR is selected for BASS OUT in SOUND MENU (see page 59). 4 Press 4 / |> to adjust the channel volume. Control range: -10.0 dB to +10.0 dB TEST m 3 l s 65 En Adjusting the audio balance Press TEST when you have completed all your adjustments. Notes • All channel levels cannot be adjusted when the stereo playback (see page 48), My Surround (see page 43) is selected as the beam mode. • “FRONT L/R” cannot be adjusted when Stereo plus 3 Beam is selected as the beam mode (see page 43). “FRONT L/R” are automatically adjusted depending on the settings of the other channels when Stereo plus 3 Beam or stereo playback is selected as the beam mode (see pages 43 and 48). If the level of a particular channel cannot be adjusted, appears in the front panel display. -dB” 1 Set the operation mode selector to YSP. TV/AV YSP 2 Press CH LEVEL repeatedly (or press CH LEVEL and ^ / ^7) to select the channel you want to adjust. The front panel display changes as follows: Using the audio output being played back You can also manually adjust the channel levels while playing back an input source such as a DVD. .1 ON t R "t f ISUI7 / W Note “SWFR” is available only when SWFR is selected for BASS OUT in SOUND MENU (see page 59). 5 TEST CH LEVEL or CH LEVEL 66 En Adjusting the audio balance 3 Press <| / D to adjust the channel volume. Control range: -10.0 dB to +10.0 dB Wait for a few seconds without operating this unit when you have completed your adjustment. Notes • All channel levels cannot be adjusted when the stereo playback (see page 48) is selected as the beam mode. • “FRONT L/R” cannot be adjusted when Stereo plus 3 Beam is selected as the beam mode (see page 43). • “FRONT L/R” are automatically adjusted depending on the settings of the other channels when Stereo plus 3 Beam or stereo playback is selected as the beam mode (see pages 43 and 48). y If the level of a particular channel cannot be adjusted, “—dB” appears in the front panel display. 4 67 En Selecting the input mode You can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source. This function is available for TV/STB, DVD, and AUX. y We recommend setting the input mode to AUTO in most cases. • AV TV |[VCR| II DVD | Il AUX || 13 NPUT1 INPUT2 MACRO VOL MODE SETUP INPUTMODE SLEEP 5BEAM ST+3BEAM 3BEAM 1 2 3 STEREO C4 MY SUR. 5 6 7 8 9 SUR. DECODE 0 [+10] (^| TEST H “ ItwAvI I yspI 3 Press INPUTMODE repeatedly to toggle between input modes. Ri + When DVD is selected as the input source When TV or STB is selected as the input source When AUX is selected as the input source 1 Set the operation mode selector to YSP. I Note 2 Press one of the input selector buttons to select the desired input source. ANALOG is not available as the input mode of DVD and AUX. • AUTO Automatically selects audio input signals in the following priority order: 1) Dolby Digital or DTS 2) PCM 3) Analog y Use this input mode in most cases. • DTS Selects only digital signals encoded in DTS. Compared to AUTO, this input mode provides greater stability while playing back CDs or LDs encoded in DTS. • ANALOG Selects only analog signals. Even when both digital and analog signals are input simultaneously, only analog signals are selected. You can adjust the default input mode to be selected when the power of this unit is turned on by adjusting INPUT MODE in INPUT MENU (see page 60). 68 En Adjusting the system parameters...