Évaluations - 4, GPA: 4.5
(
)
)
|
Photos et spécifications Yamaha YRS-2000 |
Facilité d'utilisation
When you connect this unit to your DVD/VCR combo player/recorder, connect the analog audio output jacks on your DVD/VCR combo player/recorder to the VCR AUDIO INPUT jacks on this unit in addition to the coaxial digital audio connection. Notes • Check that your DVD player/recorder is properly set to output Dolby Digital and DTS digital audio signals. If not, adjust the system settings of your DVD player/recorder. For details, refer to the operation manual supplied with your DVD player/recorder. • If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead (see page 22). Rear panel of this unit Video signal to the TV DVD player/recorder Audio 1 Audio pin cable 3 Digital audio pin cable 18 En Connections Connecting a digital sate Hite tuner or a cable TV tuner Connect the optical digital output jack on your digital satellite tuner or cable TV tuner to the TV/STB OPTICAL DIGITAL INPUT jack on this unit. Connect the analog audio output jacks on your digital satellite tuner or cable TV tuner to the TV/STB AUDIO INPUT jacks on this unit. Note This connection is not necessary if your TV has a built-in digital satellite tuner or cable TV tuner (see “Connecting a TV” on page 17). Rear panel of this unit f - AUDK o (?) VCR INPUT- r©® TV/STB OUT -DIG -OPTIC ® ^ VIDEO TV/STB TAL INPUT- COAXIAL AL- u ® AUX DVD Video signal to the TV Digital satellite tuner or cable TV tuner Audio 1 Audio pin cable 2 Optical cable 19 En English Connections Connecting a digital airwave tuner Connect the TV/STB AUDIO INPUT jacks on this unit to the analog audio output jacks on your TV. Connect the optical digital output jack on your digital airwave tuner to the TV/STB OPTICAL DIGITAL INPUT jack on this unit in addition to the analog audio connection. By doing so, you can enjoy both analog and digital broadcasts. Note This connection is not necessary if your TV has a built-in digital airwave tuner (see “Connecting a TV” on page 17). Rear panel of this unit Connect to the analog audio output jacks on the TV. o Optical digital output Digital airwave tuner Video signal to the TV Audio 1 Audio pin cable 2 Optical cable 20 En Connections Connecting a VCR To connect a VCR, connect the analog audio output jacks on your VCR to the VCR AUDIO INPUT jacks on this unit. Connect red plugs to the right jacks and white plugs to the left jacks. Rear panel of this unit r 1 1 N, R © L@> Analog audio output y V VCR Video signal to the TV Audio 1 Audio pin cable 21 En English Connections Connecting other external components If your component supports optical digital connections, connect the optical digital output jack on your component (e.g., DVD player/recorder) to the AUX OPTICAL DIGITAL INPUT jack on this unit. Rear panel of this unit f 2 9 Video signal to the TV DVD player/recorder, game console, CD player, etc. Audio 2 Optical cable 22 En Connections Connecting the AC power supply cable Once all other connections are complete, plug the AC power supply cable into the AC wall outlet. m 3 l s 23 En Getting started Remove the transparent sheet before using the remote control. Press and hold the mark on the battery cover and then open the cover. Insert the two supplied batteries (AA, R6, UM-3) into the battery compartment. Make sure you insert the batteries according to the polarity markings (+/-). 3 Close the battery cover. Notes • Change all of the batteries if you notice the following conditions: the operation range of the remote control decreases or the transmission indicator does not light up or becomes dim. Do not use old batteries together with new ones. Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color. • Exhausted batteries may leak. If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. Do not throw away batteries with general house waste. Dispose of them correctly in accordance with your local regulations. The memory stored in the remote control may be erased in the following cases: - The remote control is left without batteries for more than two minutes. - Exhausted batteries remain in the remote control. - The buttons on the remote control are accidentally pressed when you change batteries. If the memory stored in the remote control is unwantedly erased, insert new batteries and set the remote control codes again. Operation range of the remote control The remote control transmits a directional infrared beam. Use the remote control within 6 m (20 ft) of this unit and point it toward the remote control sensor of this unit during operation. Notes • Do not spill water or other liquids on...