Évaluations - 4, GPA: 4.3
(
)
)
|
Photos et spécifications Yamaha YSP-500 |
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Control range: 0.0 (wider) to 1.0 (toward the center) Default setting: 0.3 BASIC OPERATION ENTER English 49 En Enjoying stereo sound Enjoying stereo sound Notes • When you play back Dolby Digital audio signals in the stereo playback, the dynamic range becomes compressed. If the volume level decreases to the extreme, use other beam modes except My Beam. • When the stereo playback is selected as the beam mode, the surround modes (see page 46) become ineffective. 46321+1007895STEREO MY BEAM CH LEVEL MENU RETURNTEST YSP TV/AV ENTER SUR. DECODE MY SUR. 1 Set the operation mode selector to YSP. YSP TV/AV 2 Press STEREO to select the stereo playback as the beam mode. “STEREO” appears in the front panel display. 4STEREO STEREO MODE Note When you play back multi-channel sources, all signals except those from the front left and right channels are mixed down and output from the front left and right channels. No audio is output from the center and surround channels. 50 En Playing back sound clearly (My Beam) Playing back sound clearly (My Beam) My Beam 46321+1007895STEREO MY BEAM CH LEVEL MENU RETURNTEST 5BEAM ST+3BEAM 3BEAM YSP TV/AV TVAV POWER POWER STANDBY/ON ENTER SUR. DECODE MY SUR. microphone Note If My Beam is selected as the beam mode, the surround modes (see page 46) and TruBass (see page 63) become ineffective. In addition, no audio is output from the subwoofer connected to this unit. Using auto-adjust function The My Beam microphone on the remote control collects the test tones from this unit so that the beam angle can be automatically adjusted. 1 Set the operation mode selector to YSP. YSP TV/AV 2 Press and hold MY BEAM for more than two seconds. A test tone is output twice from this unit. Keep pointing the remote control toward this unit while the test tones are being output so that the My Beam microphone can collect the test tones. Control range: L50° to R50° Operation guarantee range: 6 m (20 ft), L30° to R30° Notes • If an error occurs, an error buzzer is played and “MY BEAM ERROR” is displayed in the front panel display. • An error may occur if the listening room is noisy. Make sure that the listening room is as quiet as possible while the test tones are being output. • Do not shake or move the remote control while the test tones are being output. • Do not cover the My Beam microphone on the remote control while the test tones are being output. • The batteries in the remote control may be weak if the remote control does not function properly. In this case, replace all the batteries and then try the procedure again. • When the input signal with 64 kHz, 88.2kHz, or 96 kHz of sampling frequency is being played back, the beam angle cannot be automatically adjusted. BASIC OPERATION 5MY BEAM 51 En English Playing back sound clearly (My Beam) Playing back sound clearly (My Beam) You can adjust the beam angle manually while playing back an input source. This function is also ideal if the listening position is out of the operation guarantee range of the auto-adjust function. 1 Set the operation mode selector to YSP. YSP TV/AV 2 Press MY BEAM. “MY BEAM” is displayed in the front panel display. 5MY BEAM 3 Press / while “MY BEAM” is displayed to adjust the beam angle. Control range: L90° to R90° • Press repeatedly to increase the horizontal angle on the left side. • Press repeatedly to increase the horizontal angle on the right side. ENTER ANGLE 0 4 Press MY BEAM again to complete the beam angle adjustment. 52 En Using the volume mode (Night listening enhancer/TV volume equal mode) Using the volume mode (Night listening enhancer/TV volume equal mode) change (i.e. due to commercials, etc.). 46321+1007895STEREO MY BEAM SLEEPINPUTMODE CH LEVEL MENU RETURNTEST 5BEAM ST+3BEAM 3BEAM VOL MODE AUTO SETUP YSP TV/AV ENTER SUR. DECODE MY SUR. 1 Set the operation mode selector to YSP. YSP TV/AV 2 Press VOL MODE repeatedly to select NIGHT:CINEMA, NIGHT:MUSIC, TV EQUAL VOLUME, or OFF. VOL MODE NIGHT:CINEMA NIGHT:MUSIC TV EQUAL VOL OFF The NIGHT indicator lights up in the front panel display when “NIGHT:CINEMA” or “NIGHT:MUSIC” is selected. Lights up The EQUAL indicator lights up in the front panel display when “TV EQUAL VOLUME” is selected. Lights up • Select NIGHT:CINEMA when watching films to reduce the dynamic range of film soundtracks and to make dialog easier to hear at lower volumes. • Select NIGHT:MUSIC when listening to music sources to preserve ease-of-listening for all sounds. • Select TV EQUAL VOLUME when watching TV programs. • Select OFF to turn off the volume mode. 3 Press / to adjust the effect level of compression while NIGHT:CINEMA, NIGHT:MUSIC, or TV EQUAL VOLUME is displayed. ENTER Effect.Lvl:MIN Effect.Lvl:MID Effect.Lvl:MAX • Select Effect.Lvl:MIN for minimum compression. • Select Effect.Lvl:MID for standard compression. • Select Effect.Lvl:MAX for maximum compression. Notes • The volume mode settings are canceled if you press STANDBY/ON or disconnect the AC power supply cable from the AC wall outlet. • The...