Évaluations - , GPA:
(
)
)
Fabricant : Yamaha
Taille : 1.75 mb
Nom Fichier :
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
Center speaker Front Speaker (R) Surround speaker (L) Subwoofer Surround speaker (R) Front speaker (L) 1.8 m Surround back (for NS-P336) Notes Center Speaker Place on top of the TV or inside the TV rack so that the speaker and TV are aligned vertically. Main role: Produces sounds oriented toward the center of the screen such as dialogues or vocal sounds. Front Speakers (L, R) Place the front left/right speakers on both sides of your TV at equal distances. Main roles: Produces front channel (stereo) sounds and effect sounds. Surround Speakers (L, R) Place the surround left/right speakers behind the listening position. (We recommend placing them at a height of 1.8 m (6 feet) and pointing them at the listening position.) Main roles: Produces surround sounds and effect sounds. Surround back speaker (for NS-P336 systems only) Position the surround back speaker behind your listening position, precisely between the surround speakers, about 1.8 m above the floor. Subwoofer Place the subwoofer near a front speaker and turn it slightly toward the center of the room to reduce wall reflections. Main roles: Produces bass sounds and low frequency (LFE) sounds contained in Dolby Digital or DTS. • If the speakers interfere with TV reception, noises may appear on the TV screen. In such a case, move the speakers a little away from the TV. • Bass sounds produced by the subwoofer may be heard differently depending on the listening position and subwoofer location. To enjoy desired sounds, try to change the location of the subwoofer according to the listening position. Placing the Speakers To enjoy quality sounds thoroughly, you need to place the speakers in their appropriate positions and install them correctly. After deciding the speaker layout (see “Roles and Layout of Speakers” above), follow the procedure below to install the speakers. Placing the center speaker Peel off the seal When placing the center speaker on top of the TV, use the supplied fasteners to secure the speaker. Notes • Do not place the speaker on the TV if the top of the TV is not level or if it is narrower than the bottom surface of the speaker. Doing so may cause the speaker to fall. In this case, place the speaker inside a TV rack or on a level floor. Fastener • Before attaching the fasteners to the TV, clean the surface with a dry cloth. A dirty or wet surface may weaken the adhesive force and cause the speaker to fall. • Do not touch the bonding surfaces of the fasteners after peeling off the seals. Doing so may weaken the adhesive force and cause the speaker to fall. English 3 Placing the Speakers Placing the Speakers Detach Attach the non-skid pads to the bottom of the subwoofer, and then place the subwoofer on a level hard floor. y Using non-skid pads prevents the subwoofer from sliding when it vibrates, and ensures quality sound production. Placing the front and surround speakers You can place the front and surround speakers on the floor or a rack, or attach them to a wall. Also, you can mount them on YAMAHA speaker stands “SPS-200” or commercially available speaker stands. Please select an installation method that suits your room layout. To place on the floor or a rack Attach the non-skid pads to the bottom of each speaker, and then place them on level hard surfaces. y Using non-skid pads prevents the speakers from sliding when they vibrate, and ensures quality sound production. Non-skid pad To attach to a wall Screws (Diameter: 3.5 to 4 mm (1/8” to 5/32”), commercially available) 110 mm (4-1/16”) 110 mm (4-1/16”) 10 mm (13/32”) 20 mm (25/32”) or more You can attach the speakers to a wall using commercially available screws (Diameter: 3.5 to 4 mm (1/8” to 5/32”), Length: 20 mm (25/32”) or more). One speaker requires two screws. To attach all speakers to a wall, you need to prepare eight screws. 1 Install two screws in the wall where you want to place the speaker. 2 Hang the speaker on the screws using the holes in the back of the speaker. Placing the Speakers Placing the Speakers • One speaker weighs about 1.0 kg (2 lbs 3 oz). To attach a speaker to a wall using screws, the wall must be firm. Do not attach a speaker to a wall that is made of weak materials such as plaster or veneered woods. Doing so may cause the speaker to fall. • Make sure you use specified screws to attach a speaker to a wall. Using clamps other than specified screws, such as short screws, nails, or two-sided tape, may cause the speaker to fall. • When connecting the speakers, fix the speaker cables in place so that cables do not loosen. If your foot or hand accidentally gets caught on a loose speaker cable, the speaker may fall. • After attaching each speaker, check that the speaker is fixed securely. YAMAHA will bear no responsibility for any accidents caused by improper installations. To mount on a speaker stand You can mount the speakers on YAMAHA speaker stands “SPS-200” (set of two, optional) or commercially available speaker brackets. When using commercially available sp...