Évaluations - 3, GPA: 4.3
(
)
)
|
Photos et spécifications Yamaha NP-S2000 |
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
2 Within five seconds, press . ENTER y To clear all preset settings, execute “Initialize” in the advanced setup menu (• P.17). Make sure that this operation will reset all the settings of this unit to factory default. Notes • This unit does not recall the preset content in the following cases: – the PC which stores the selected content is turned off or disconnected from the network. – the selected Internet radio station is temporary unavailable or out of service. – the directory of the selected content has been changed. • This unit memorizes the relative position of the preset contents in a directory. If you have added or deleted any music files to or from the directory, this unit may not recall the preset content correctly. In such cases, preset the contents again. 16 En SETUP MENU SETUP MENU You can configure the various settings of this unit using the setup menu. Setup menu operations ¦ Operations from PC browser or mobile device 1 In the “Source” screen, select “Setup”. Setup 2 Select a menu item to configure. ¦ Operations from remote control y For details on the controls on the front panel/remote control, see “CONTROLS AND FUNCTIONS” (• P.20). 1 Press SETUP to enter the setup menu (• P.18). To make the advanced setup menu items (• P.19) selectable, press SETUP while holding down RETURN (on the main unit). SETUP Cursor buttons/ ENTER RETURN NOW PLAYING SETUP HOME ENTER RETURN PUSH SELECT ENTER SOURCE RETURN NETWORK Configuration 2 Press ./. to select a menu item to configure and then press ENTER. For some menu items, repeat step 2 to select a submenu item. Firmware Update 3 Press ./. to select a parameter and then press ENTER. y You need to enter a numerical address for some menu items. In this case, press ./• to move the target, ./• to select a number and ENTER to confirm it. 3 Select a parameter to be set. y You need to enter text for some menu items. In this case, select the entry field, use the keyboard to enter text and the Enter key to confirm it. English 17 En SETUP MENU Setup menu list Available setup menus vary depending on the controller. Menu Submenu Settings (Bold: default) Function Controller Mobile device Remote control NETWORK Configuration DHCP On, Off Select “On” to use the DHCP server to automatically configure the network settings of this unit or “Off” to configure manually. 0 IP Address Specify the IP address when “DHCP” is “Off”. *1 Subnet Mask Specify the subnet mask when “DHCP” is “Off”. *1 Default Gateway Specify the default gateway when “DHCP” is “Off”. *1 DNS Server (P) Specify the primary DNS server when “DHCP” is “Off”. *1 DNS Server (S) Specify the secondary DNS server when “DHCP” is “Off”. *1 NETWORK Information MAC Address The MAC address of this unit is shown. The MAC address is also used as a vTuner ID. 0 . Status The network status of this unit is shown. System The serial number of this unit is shown. MAC Address Filter Specify the MAC addresses (up to 5) of the network components that will be permitted access to this unit when “MAC Address Filter On/Off” is “On”. 0 Firmware Version (NP-S2000 Information) The firmware version of this unit is shown. 0 0 Firmware Update Update the firmware of this unit. – If “Firmware Update?” appears, press ENTER to start firmware update. Do not operate this unit until “Update OK” appears. – If the firmware is already the latest, “Update OK” appears. 0 Friendly Name Specify the friendly name of this unit for Windows 7. 0 *1: When “DHCP” is “On”, you can check the values (IP address, etc.) assigned by the DHCP server. 18 En SETUP MENU Advanced setup menu The following menu items are available only when you enter the setup menu by pressing SETUP (on the remote control) while holding down RETURN (on the main unit). Menu Settings (Bold: default) Function MAC Address Filter On/Off On, Off Select “On” to permit access to this unit only from the network components with the MAC addresses specified in the “MAC Address Filter” list. Select “Off” to disable the MAC address filter function. Gapless Playback On, Off Select “On” to skip silence between each track and enable seamless playback. Select “Off” to disable the gapless playback function. This function works on “DLNA” content only. y When “Gapless Playback” is “On”, this unit starts to read data of the next track at the end of the current track. Some playback operations (skip, repeat, etc.) will work on the next track during this process. vTuner Account Reset Yes, No Select “Yes” to reset the vTuner account. If “Please Power Off!” appears, turn off this unit. The reset operation will be reflected the next time you turn on this unit. y To create a new account, access “You need the MAC address of this unit and your e-mail address. Initialize Yes, No Select “Yes” to reset the settings of this unit to factory default. If “Please Power Off!” appears, turn off this unit. The reset operation will be reflected the next time you turn on this unit. 19 En English CONTROLS AND ...