Évaluations - 2, GPA: 4.5
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
When the / switches are on (pressed in), the signal will be sent to the GROUP buses 3/4. When both switches are on, the signal will be sent to GROUP buses 1/2 and 3/4. 7 PAN (panpot) control BAL (balance) control The PAN knobs (channels 1~8) set the stereo position of the signal that is sent to the GROUP buses 1/2 or 3/4. The BAL knobs (channels 9~12) set the balance between the left/right channels, and assign the signals received at inputs 9 L (MONO) and 11 L (MONO) to the GROUP buses 1/3, and the signals received at inputs 10 R and 12 R to the GROUP buses 2/4. If signals are input monaurally to input 9 L (MONO) or 11 L (MONO), the same signal will be sent to groups 1~4. 8 Channel fader This controls the output level of the input channel signal, adjusting the volume balance between channels. The faders of unused channels should be lowered. PHANTOM MIC INPUT 1-4 LINE MIC INPUT 5-8 LINE EFFECTMONIPEAK PEAK LOWMID EQ GAIN HA HIGH PAN PAD EFFECT MONI EFFECT INS I/O PAD PHANTOM MASTER GROUP 4321 PAN HIGH HA GAIN EQ MIDLOW MONI EFFECT MONI GAIN LOW MID HIGH BAL R L(MONO) EQHA INPUT 9/10 11/12 HA EQ PEAK MX12/4—Owner’s Manual Front panel STGROUP 4GROUP 3GROUP 2GROUP 1 0 10 3 4 ST GROUP EFFECT MONI2 METER C-R•PHONES TAPE IN ST EFFECT . MONI C-R•PHONES 0 10 0 10 0 10 0 10 0 10 0 10 ST MONI SENDRTN MONI 1MONI EFFECT . MONI 2 ST TAPE IN ST 0 10 L R L R TAPE IN REC OUT PHANTOM POWER ONVOCAL L HALL S HALL DIGITAL EFFECT MONI 1 EFFECT / MONI 2 L R PEAK +5 +3 +1 0 -1 -3 -5 -7 -10 -15 -20 ST GRAPHIC EQUALIZER 10 5 0 5 10 15 20 30 40 00 10 5 0 5 10 15 20 30 40 00 10 5 0 5 10 15 20 30 40 00 10 5 0 5 10 15 20 30 40 00 10 5 0 5 10 15 20 30 40 00 +12 -12 6 0 6 +12 -12 6 0 6 8k4k2k1k500250125 Front panel STGROUP 4GROUP 3GROUP 2GROUP 1 0 10 3 4 ST GROUP EFFECT MONI2 METER C-R•PHONES TAPE IN ST EFFECT . MONI C-R•PHONES 0 10 0 10 0 10 0 10 0 10 0 10 ST MONI SENDRTN MONI 1MONI EFFECT . MONI 2 ST TAPE IN ST 0 10 L R L R TAPE IN REC OUT PHANTOM POWER ONVOCAL L HALL S HALL DIGITAL EFFECT MONI 1 EFFECT / MONI 2 L R PEAK +5 +3 +1 0 -1 -3 -5 -7 -10 -15 -20 ST GRAPHIC EQUALIZER 10 5 0 5 10 15 20 30 40 00 10 5 0 5 10 15 20 30 40 00 10 5 0 5 10 15 20 30 40 00 10 5 0 5 10 15 20 30 40 00 10 5 0 5 10 15 20 30 40 00 +12 -12 6 0 6 +12 -12 6 0 6 8k4k2k1k500250125 Master control section 1ST OUT output select switch 5 6A78B This switch selects the signal which is output via the ST fader from the ST OUTPUT jacks. ST position ( ) The ST OUTPUT jacks will output the ST bus signal (the post-fader signals of groups 1~4, the input signals from the RTN jacks, the return signal from the internal 0 digital effect, and the input signal from the TAPE IN jacks). 9 GROUP 3 4 position ( ) The ST OUTPUT jacks will output the pre-fader signals of groups 3/4. When this position is selected, the input channel sig- C nals will be sent directly to the ST bus without passing through the group buses 1~4. This setting lets you use 4 the MX12/4 as a simple 12 in-2 out mixer. 12ST master fader This fader adjusts the final combined level of all channels, and sends the signal to the ST OUTPUT jacks. The meters allow you to view the L and R output levels. 3GROUP 1~4 faders These faders adjust the signal levels of groups 1~4, and send their signals to GROUP OUTPUT 1~4 jacks 2 respectively and to the ST bus. Groups 1 and 3 are sent to ST L, and groups 2 and 4 are sent to ST R. 4Stereo graphic EQ This is a stereo 7-band graphic equalizer that adjust the 3 tonal quality of the signal output to the ST OUTPUT jacks. A ±12dB boost or cut is provided at each of the frequency bands 125, 250, 500, 1k, 2k, 4k, and 8kHz. 5TAPE IN jacks These are line level input jacks to which an external DAT recorder or CD player etc. can be connected for monitoring. The signals which are input here are sent to the ST bus. The input levels are adjusted by the TAPE IN ST control (9). Depending on the setting of the C-R• PHONES select switch (D), the signal can also be monitored directly from the C-R OUT jack. 6REC OUT jacks These jacks allow an external DAT recorder or cassette recorder to be connected, to record the same signal as the ST OUTPUT jacks. The signals that are output from these jacks are not affected by the settings of the ST master fader or the graphic EQ. Make recording level adjustments on the recording device. 7PHANTOM indicator This indicator will light when the PHANTOM switch (rear panel 2) is on. 8POWER indicator This indicator will light when the MX12/4's power is on. MX12/4—Owner’s Manual Master control section Master control section This knob adjusts the monitor level of the external device (tape deck etc.) connected to the TAPE IN jacks (5). 0 DIGITAL EFFECT MONI control—This knob adjusts the level of the return signal which is sent from the inter nal digital effect to the MONI bus. ST control—This knob adjusts the level of the return signal which is sent from the internal digital effect to the ST bus. Effect select switches—These switches select the effect type for the internal d...